• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.7-11
• /
• 2015

In this paper, an automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It is very difficult to determine focusing step size and moving direction in one camera autofocusing. The proposed method can improve speed and accuracy of focusing by using the optical axis interval of two cameras, which is automatically set up as focusing step size. Also, it can determine moving direction from focus value comparisons of two cameras, and then solve ambiguity of one camera focusing. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.1
• /
• pp.51-55
• /
• 2014

In this paper, an hybrid automatic focusing method has been proposed for speedy and reliable measurement and inspection in industry. It can improve reliability of focusing position by using not a focusing measure but the hybrid one that is incorporated with sobel operator and auto-correlation. Also, it can not only reduce control time of focusing position using adaptive step size, but also improve accuracy of focusing position by gaussian interpolation. Its performance is verified by experiments. It is expected that it can apply to optical system for measurement and inspection in industry fields.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.55-60
• /
• 2019

Smart-phone in the recently released high-end applied to the camera module is equipped with the most features auto focusing camera module. Also, auto focusing camera module is divided into voice coil motor, encoder, and piezo according to type of motion mechanism. Auto focusing camera module is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. VCM actuator is made of magnet, yoke as a metal, and coil as a copper wire. Recently, the assembly as yoke and magnet is made by human resources. These process has a long process time and it is difficult to secure quality. Also, These process is not economical in cost, and productivity is reduced. Therefore, an automatic assembly as yoke and magnet is needed in the present process. In this paper, we have developed an automatic assembly device that can automatically assemble yoke and magnet, and performed verifying performance. Therefore, by using the developed automatic assembly device, it is possible to increase the productivity and reduce the production cost.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3759-3766
• /
• 1996

In this paper a new gefchmique to measaure the creater wear using image processing and automatic focusing is presented. The contour detection algorithm, which can adopt ina noisy image, is suggested. It is suitable for eliminating high frequency noses with lower processing time and without blurring. An automatic focusing technique is applied to measure a createrwear depth with a one-dimensional search algorithm for finding the bestfocus. This method is implemented in the tool microscope driven by a servo motor. The results show that the countour and depth of crater wear can be measured reliably.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.159-167
• /
• 2012

Eye tracking technology tracks human eyes movements to understand user's intention. This technology has been improving slowly and should be used for a variety of occasions now. For example, it enables persons with disabilities to operate a computer with their eyes. This article will show a typical implementation of an eye tracking system for persons with disabilities, after introducing the design principles and specific implementation details of an eye tracking system. The article discussed the realization of self-adapting regulation algorithm in detail. The self-adapting algorithm is based on feedback signal controlling the lens movements to realize automatic focus, and to get a clear eyes image. This CCD camera automatic focusing method has self-adapting capacity for changes of light intensity on the external environment. It also avoids the trouble of manual adjustment and improves the accuracy of the adjustment.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.51-60
• /
• 1988

A data transform is performed by using a point-electrode focusing method in order to obtain accurate and objective interpretation of the borehole normal resistivity data. Two new synthetic curves can be generated through the data transform. The one is an approximate apparent resistivity curve, which would be used to predict the true resistivity of the formation. The other one is a bed boundary coefficient curve, which would be used to distinguish bed boundaries. The accuracy of the normal data interpretation can be improved and this method takes much less computational time than a linear inversion technique. Moreover, this method does not require an initial guess model and limitation of number of unknown parameters. Since this algorithm can be run on a personal computer, an immediate interpretation would be possible at the field work site. If an additional set of electrodes(a=125cm)is attached to a normal resistivity tool which is being used (a=25cm, 50cm, 100cm), the apparent resistivity for the point-electrode focusing device can be calculated, and it would maximize the use of short and long normal resistivity data and promote the accuracy of the interpretation.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.389-396
• /
• 2012

Objective: The aim of this study is to design an auto showering system regarding bed type for old people or bedridden patients. Background: The rapid growth concerning the aging population leads to an increase in elderly bedridden patients living in senior care centers and hospitals where care givers have difficulty bathing older people with limited mobility. Method: In this study, a showering equipment for experiment was based on anthropometric and researching existing products. The nozzle position was optimized by showering tests and simulations using showering equipment. Results: The problems regarding the existing products were analyzed and the nozzle position was optimized through showering tests. The number, position, and spraying angle of the nozzle were optimized through showering simulations. The automatic showering system concerning bed type was designed by considering their results. Conclusion: When designing an automatic showering system, the most important design element involves determining the position of nozzle and angle of water injection and the number of nozzles. The system was developed by applying the results through user centered-research. Application: The user centered-research for developing products was applied directly in order to develop automatic baths, showering products etc. Furthermore, it was also available to be applied towards senior friendly products.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.4
• /
• pp.53-63
• /
• 2023

The utilization of department information in bibliometric analysis using scientific and technological literature is highly advantageous. In this paper, the department information dataset was built through the screening, data refinement, and classification processing of authors' department type belonging to university institutions appearing in academic journals in the field of science and technology published in Korea, and the automatic classification model based on deep learning was developed using the department information dataset as learning data and verification data. In addition, we analyzed the co-authorship structure and network in the field of computer science using the department information dataset and affiliation information of authors from domestic academic journals. The research resulted in a 98.6% accuracy rate for the automatic classification model using Korean department information. Moreover, the co-authorship patterns of Korean researchers in the computer science and engineering field, along with the characteristics and centralities of the co-author network based on institution type, region, institution, and department type, were identified in detail and visually presented on a map.

• Korean Journal of Optics and Photonics
• /
• v.22 no.1
• /
• pp.30-34
• /
• 2011

A novel alignment method that can be used for aligning the collimating mirror employed in a monochromator is described. In most of the spectrometer industry, the alignment of optical components such as a focusing mirror, a grating and a collimating mirror has been performed manually so far. In this paper, we use a matchedfilter based image correlation technique for measuring the accurate image position which is used for aligning the collimating mirror. The experimental results show that with the proposed scheme automatic alignment can be completed within 10 seconds.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.125-134
• /
• 2022

Due to the development of smartphone technology, as of 2020, 91.9% of people use the Internet[1] to frequently acquire information through websites and mobile apps. As the number of homepages in charge of providing information is increasing every year, the number of applications for web vulnerability diagnosis, which diagnoses the safety of homepages, is also increasing. In the existing web vulnerability check, the number of diagnostic personnel should increase in proportion to the number of homepages that need diagnosis because the diagnosticians manually test the homepages for vulnerabilities. In reality, however, there is a limit to securing a web vulnerability diagnosis manpower, and if the number of diagnosis manpower is increased, a lot of costs are incurred. To solve these problems, an automatic diagnosis tool is used to replace a part of the manual diagnosis. This paper explores a new method to expand the current automatic diagnosis range. In other words, automatic diagnosis possible items were derived by analyzing the impact of web vulnerability diagnosis items. Furthermore, automatic diagnosis identified possible items through comparative analysis of diagnosis results by performing manual and automatic diagnosis on the website in operation. In addition, it is possible to replace manual diagnosis for possible items, but not all vulnerability items, through the improvement of automatic diagnosis tools. This paper will explore some suggestions that can help improve plans to support and implement automatic diagnosis. Through this, it will be possible to contribute to the creation of a safe website operating environment by focusing on the parts that require precise diagnosis.