• 센서학회지
• /
• 제29권6호
• /
• pp.412-419
• /
• 2020

In this study, a PID control method for sweeping automatic linearization of a wavelength swept laser is proposed. First, the closedloop transfer function embodying the PID control is derived. Through the simulation of the function, K_p = 0.022, K_i = 0.008, K_d = 0.002 were obtained as the best PID coefficients for fast linear sweeping. The performance test using the PID coefficients showed that linear sweeping was held up well with a 98.7% decrement in nonlinearity after the 10th feedback, and 45 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The equipment consists of a fiber Bragg grating array, an optical-electronic conversion circuit, and a LabVIEW FPGA program. Every 5s, automatic feedback and PID control generate a new compensated waveform and produce a better linear sweeping than before. Compared with nonlinear sweeping, linear sweeping can reduce the cumbersome and time-consuming recalibration processes and produce more accurate measurement results.

• 한국통신학회논문지
• /
• 제8권3호
• /
• pp.96-104
• /
• 1983

동축 케이블이나 케이블 쌍을 사용하는 유선전송 시스템에 있어서 케이블의 전송특성에 의한 손실은 케이블 길이와 주위온도에 따라 변화하며 항상 $\sqrt f$ 특성 형태를 취한다. 이러한 형태의 손실을 보상하기 위해 궤환과 순방향 공급 경로의 직렬결함을 이용한 자동조절 능동가변 등화기를 제시하였다. 본 논문에 제시한 자동조절 능동가변 등화기는 종래의 수동가변 등화기가 가지고 있던 인덕터의 필요성, 복잡한 설계과정, 그리고 매우 복잡한 현대 전자제어 시스템과의 비 양립성 등 대부분의 결점을 제거시켜 준다. 또한 이러한 설계는 다른 능동가변 등화기 설계에 비해 많은 이점을 가지고 있으며 특시 1MHz이하에서의 정확한 등화에 응용할 수 있다.

• 전기학회논문지
• /
• 제60권2호
• /
• pp.451-454
• /
• 2011

In this paper, a wideband clock generator using novel Automatic frequency calibration(AFC) scheme is proposed. Wideband clock generator using AFC has the advantage of small VCO gain and wide frequency band. The conventional AFC compares whether the feedback frequency is faster or slower then the reference frequency. However, the proposed AFC can detect frequency difference between reference frequency with feedback frequency. So it can be reduced an operation time than conventional methods AFC. Conventional AFC goes to the initial code if the frequency step changed. This AFC, on the other hand, can a prior state code so it can approach a fast operation. In simulation results, the proposed clock generator is designed for DisplayPort using the CMOS ring-VCO. The VCO tuning range is 350MHz, and a VCO frequency is 270MHz. The lock time of clock generator is less then 3us at input reference frequency, 67.5MHz. The phase noise is -109dBC/Hz at 1MHz offset from the center frequency. and power consumption is 10.1mW at 1.8V supply and layout area is $0.384mm^2$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.103-108
• /
• 1999

This paper describes development of a new automated real-time system which preforms measurement data reduction and management, geotechnical backanalysis, and feedback design for embankment construction on soft ground. Such a system can be an effective, useful and economical tool for managing a large site development on soft ground. The system consists of data base system to characterize soil properties and identify instrumentation, analysis system for ground behavior and stability coupled with automatic monitoring system, and feedback design system which is a new technique to reflect the analysis of measured ground behavior against original design.

• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1507-1516
• /
• 1999

본 논문에서는 전력증폭기 선형화를 위한 Cartesian feedback 방식의 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 개선된 방식을 제안한다. Cartesian feedback에 의한 비선형 전력증폭기 왜곡성분의 감쇠 정도는 시스템 루프의 이득, 대역폭, 시간지연에 의해 결정된다고 알려져 있다. 그러나 궤환 경로 각 소자에서 발생하는 DC offset과 이득 및 위상의 불일치로 인하여 송신기의 출력신호에 원하지 않는 반송파 성분과 이미지 신호가 발생하여 궤환보상의 효과가 반감되는 결과를 초래한다. 본 논문에서는 디지털 신호처리 시스템 구조에서 이진 검색 (binary search) 알고리즘을 이용하여 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 방식을 제안하고 컴퓨터 모의실험을 통하여 제안된 방식의 성능을 분석한다. 모의실험에서 고려된 방식에 비하여 동일한 정도의 DC offset과 이득 및 위상 불일치의 보상에 걸리는 시간을 평균적으로 40% 단축할 수 있었다.

• International Journal of Contents
• /
• 제5권3호
• /
• pp.65-70
• /
• 2009

This paper describes ongoing work on the correction of adverb errors committed by Korean learners studying English as a foreign language (EFL), using an automated English writing assessment system. Adverb errors are commonly found in learners 'writings, but handling those errors rarely draws an attention in natural language processing due to complicated characteristics of adverb. To correctly detect the errors, adverbs are classified according to their grammatical functions, meanings and positions within a sentence. Adverb errors are collected from learners' sentences, and classified into five categories adopting a traditional error analysis. The error classification in conjunction with the adverb categorization is implemented into a set of mal-rules which automatically identifies the errors. When an error is detected, the system corrects the error and suggests error specific feedback. The feedback includes the types of errors, a corrected string of the error and a brief description of the error. This attempt suggests how to improve adverb error correction method as well as to provide richer diagnostic feedback to the learners.

• Journal of the Korean Statistical Society
• /
• 제27권2호
• /
• pp.237-249
• /
• 1998

Process adjustment has been widely used in production processes in order to set the output characteristic as close as to the target. Box and Kramer(1992) developed a feedback adjustment control procedure for process adjustment. We generalize their procedure by using a rational subgrouping of sequential observations. In this paper the feedback control rule of the rational subgrouping is proposed and the overall expected cost is evaluated. Also properties of the proposed control scheme are illustrated and compared to Box and Kramer's in the context of the expected cost.

• Physical Therapy Rehabilitation Science
• /
• 제1권1호
• /
• pp.13-16
• /
• 2012

Objective: Electroencephalogram (EGG)-feedback is a training procedure aimed at altering brain activity, and is used as a treatment for disorders like attention. The purpose of this study was to determine the effects of external focus of attention by EGG-feedback on balance in young adults. Design: Cross-sectional study. Methods: Subject were students in Sahmyook University. Fifty young adults in their twenties and thirties. Subjects were performed both with and without external focus of attention by EEG-feedback on the posture of standing and tandem standing. Participants were educated effort to maintain static posture when they were under internal focus of attention. Good Balance System was used for measurement of postural consistency upon the following force platforms. Results: Body sway decreased significantly both normal standing and tandem standing with external focus of attention by EEG-feedback (p<0.05). Conclusions: The results demonstrate that the benefits of an external attentional focus are generalizable to young adults. The external focus of attention outperformed the internal focus of attention on the postural balance (p<0.05). It is showed that external focus of attention significant effects on balance by revoked automatic postural control of movement. Furthermore balance might be improved by training with an external focus. Further study is required to develop for training as a method of preventing fall in elderly peoples.

• 정보관리학회지
• /
• 제2권2호
• /
• pp.38-70
• /
• 1985

정보검색에 있어 최종이용자 중개시스템에 대한 기술현황과 앞으로의 전망을 논의하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.365-370
• /
• 2001

This study is the selection of optimum forming condition for RP system using ADS. Program using ADS reduces the required time for feedback between design and manufacturing of workpiece. When we produce rapid prototype using RP system, we investigate the relationship between Facetres in system variable number of AutoCAD and circularity of rapid prototype, and we will find optimum forming condition in RP system.