• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.412-419
• /
• 2020

In this study, a PID control method for sweeping automatic linearization of a wavelength swept laser is proposed. First, the closedloop transfer function embodying the PID control is derived. Through the simulation of the function, K_p = 0.022, K_i = 0.008, K_d = 0.002 were obtained as the best PID coefficients for fast linear sweeping. The performance test using the PID coefficients showed that linear sweeping was held up well with a 98.7% decrement in nonlinearity after the 10th feedback, and 45 nm sweeping range, 1 kHz sweeping frequency, and 8.8 mW average optical power were obtained. The equipment consists of a fiber Bragg grating array, an optical-electronic conversion circuit, and a LabVIEW FPGA program. Every 5s, automatic feedback and PID control generate a new compensated waveform and produce a better linear sweeping than before. Compared with nonlinear sweeping, linear sweeping can reduce the cumbersome and time-consuming recalibration processes and produce more accurate measurement results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.3
• /
• pp.96-104
• /
• 1983

In wire transmission systems using a coaxial cable or cable pair, the cable loss caused by the transmission characteristic of the cable varies depending on the length of the cables or variation in the ambient temperature, and usually takes the form close to a $\sqrt f$ characteristic. In order to compensiate for such loss, an actove variable automatic equalizer with a tandam combination of feedback and feedforward was presented. The automatic equalizer to be described here overcomes many of the disadbantages associated with the conventional passive variable equalizers, which include the need for inducters, a complex design procedure, and incompatibility with modern dldctronic control systems that are very complicated. This design has advanatges over other active variable equalizer design and it is especially applicable to precision equalization at frequencies bellow 1MHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.451-454
• /
• 2011

In this paper, a wideband clock generator using novel Automatic frequency calibration(AFC) scheme is proposed. Wideband clock generator using AFC has the advantage of small VCO gain and wide frequency band. The conventional AFC compares whether the feedback frequency is faster or slower then the reference frequency. However, the proposed AFC can detect frequency difference between reference frequency with feedback frequency. So it can be reduced an operation time than conventional methods AFC. Conventional AFC goes to the initial code if the frequency step changed. This AFC, on the other hand, can a prior state code so it can approach a fast operation. In simulation results, the proposed clock generator is designed for DisplayPort using the CMOS ring-VCO. The VCO tuning range is 350MHz, and a VCO frequency is 270MHz. The lock time of clock generator is less then 3us at input reference frequency, 67.5MHz. The phase noise is -109dBC/Hz at 1MHz offset from the center frequency. and power consumption is 10.1mW at 1.8V supply and layout area is $0.384mm^2$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.103-108
• /
• 1999

This paper describes development of a new automated real-time system which preforms measurement data reduction and management, geotechnical backanalysis, and feedback design for embankment construction on soft ground. Such a system can be an effective, useful and economical tool for managing a large site development on soft ground. The system consists of data base system to characterize soil properties and identify instrumentation, analysis system for ground behavior and stability coupled with automatic monitoring system, and feedback design system which is a new technique to reflect the analysis of measured ground behavior against original design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1507-1516
• /
• 1999

본 논문에서는 전력증폭기 선형화를 위한 Cartesian feedback 방식의 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 개선된 방식을 제안한다. Cartesian feedback에 의한 비선형 전력증폭기 왜곡성분의 감쇠 정도는 시스템 루프의 이득, 대역폭, 시간지연에 의해 결정된다고 알려져 있다. 그러나 궤환 경로 각 소자에서 발생하는 DC offset과 이득 및 위상의 불일치로 인하여 송신기의 출력신호에 원하지 않는 반송파 성분과 이미지 신호가 발생하여 궤환보상의 효과가 반감되는 결과를 초래한다. 본 논문에서는 디지털 신호처리 시스템 구조에서 이진 검색 (binary search) 알고리즘을 이용하여 궤환 경로에서 발생하는 DC offset과 이득 및 위상 불일치를 자동적으로 보상하는 방식을 제안하고 컴퓨터 모의실험을 통하여 제안된 방식의 성능을 분석한다. 모의실험에서 고려된 방식에 비하여 동일한 정도의 DC offset과 이득 및 위상 불일치의 보상에 걸리는 시간을 평균적으로 40% 단축할 수 있었다.

• International Journal of Contents
• /
• v.5 no.3
• /
• pp.65-70
• /
• 2009

This paper describes ongoing work on the correction of adverb errors committed by Korean learners studying English as a foreign language (EFL), using an automated English writing assessment system. Adverb errors are commonly found in learners 'writings, but handling those errors rarely draws an attention in natural language processing due to complicated characteristics of adverb. To correctly detect the errors, adverbs are classified according to their grammatical functions, meanings and positions within a sentence. Adverb errors are collected from learners' sentences, and classified into five categories adopting a traditional error analysis. The error classification in conjunction with the adverb categorization is implemented into a set of mal-rules which automatically identifies the errors. When an error is detected, the system corrects the error and suggests error specific feedback. The feedback includes the types of errors, a corrected string of the error and a brief description of the error. This attempt suggests how to improve adverb error correction method as well as to provide richer diagnostic feedback to the learners.

• Journal of the Korean Statistical Society
• /
• v.27 no.2
• /
• pp.237-249
• /
• 1998

Process adjustment has been widely used in production processes in order to set the output characteristic as close as to the target. Box and Kramer(1992) developed a feedback adjustment control procedure for process adjustment. We generalize their procedure by using a rational subgrouping of sequential observations. In this paper the feedback control rule of the rational subgrouping is proposed and the overall expected cost is evaluated. Also properties of the proposed control scheme are illustrated and compared to Box and Kramer's in the context of the expected cost.

• Physical Therapy Rehabilitation Science
• /
• v.1 no.1
• /
• pp.13-16
• /
• 2012

Objective: Electroencephalogram (EGG)-feedback is a training procedure aimed at altering brain activity, and is used as a treatment for disorders like attention. The purpose of this study was to determine the effects of external focus of attention by EGG-feedback on balance in young adults. Design: Cross-sectional study. Methods: Subject were students in Sahmyook University. Fifty young adults in their twenties and thirties. Subjects were performed both with and without external focus of attention by EEG-feedback on the posture of standing and tandem standing. Participants were educated effort to maintain static posture when they were under internal focus of attention. Good Balance System was used for measurement of postural consistency upon the following force platforms. Results: Body sway decreased significantly both normal standing and tandem standing with external focus of attention by EEG-feedback (p<0.05). Conclusions: The results demonstrate that the benefits of an external attentional focus are generalizable to young adults. The external focus of attention outperformed the internal focus of attention on the postural balance (p<0.05). It is showed that external focus of attention significant effects on balance by revoked automatic postural control of movement. Furthermore balance might be improved by training with an external focus. Further study is required to develop for training as a method of preventing fall in elderly peoples.

• Journal of the Korean Society for information Management
• /
• v.2 no.2
• /
• pp.38-70
• /
• 1985

The purpose of this paper is to provide a review of the literature on the role of end-user intermediary systems in information retrieval. The paper starts with an introduction pointing out the problems involved in conventional retrieval system. The next section covers the major developments in the field of intermediary systems including natural language processing, automatic query formulation, relevance feedback, and automatic query refinement. The paper concludes with a general overview of the current state of the art and its future implications in information retrieval.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.365-370
• /
• 2001

This study is the selection of optimum forming condition for RP system using ADS. Program using ADS reduces the required time for feedback between design and manufacturing of workpiece. When we produce rapid prototype using RP system, we investigate the relationship between Facetres in system variable number of AutoCAD and circularity of rapid prototype, and we will find optimum forming condition in RP system.