• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.79-84
• /
• 2011

In general, a valve body of the automatic transmission(AT) is controlled by the clutch, the brake and lubricating oil flow in a hydraulic system and lubricant flow for each valve can be adjusted independently. To increase the lifetime of AT, the lubrication flow rate in a valve body for a 6 speed AT based parallel hybrid electric vehicle must be provided with proper oil distribution and control. In this study, we carried out several experiments without the inner parts of AT and with a AT assembly. The variation of the flow rate on oil temperature and pressure between an oil supply port and the outlets of the lubrication port was evaluated and analyzed. In the case of AT without the inner parts, it was evident that as the oil required for an operation of the clutch and brake was discharged from the outlet port, the flow rate from each lubrication port is decreased. However, the flow rate of the AT assembly was slightly increased. In addition, the lubrication flow rate was increased with increasing the oil temperature, and also it was reduced with increasing the oil pressure. Details of the resulting data are discussed.

• 품질경영학회지
• /
• 제29권3호
• /
• pp.66-78
• /
• 2001

This paper deals with problem of determining process target value under automated visual inspection(AVI) system. Three independent error sources - digitizing error, illumination error, and positional error - which have a close relationship with the performance of the AVI system, are considered. Assuming that digitizing error is uniformly or normally distributed and illumination and positional errors are normally distributed, respectively, the distribution function for the error of measured lengths is derived when the length of a product is measured by the AVI system. Then, Optimal target values under two error models of AVI system are obtained by minimizing the total expected cost function which consists of give away, rework and penalty cost. To validate two process setting models, AVI system for drinks filling process is made up and test results are discussed.

• International Journal of Control, Automation, and Systems
• /
• 제1권4호
• /
• pp.511-514
• /
• 2003

The Infrared Camera usually detects only Infrared waves emitted from the light in order to illustrate the temperature distribution. An Infrared diagnosis system can be applied to various fields. But the defect discrimination can be automatic or mechanized in the special shoes total inspection system. This study introduces a method for special shoes nondestructive total inspection. Performance of the proposed method is shown through thermo-Image.

• 방송공학회논문지
• /
• 제20권4호
• /
• pp.598-605
• /
• 2015

효과적으로 경보를 전달하면 재난 피해를 크게 줄일 수 있다. 경보 전달 채널을 다양화 하는 것이 경보 전달 효과를 향상시킬 수있는 방법 중 하나이다. 본 논문에서는 기존 경보시스템을 분석하여 문제점을 보완한 새로운 경보시스템을 제안한다. 기존에 운영 중인 CBS (Cell Broadcasting System) 재난문자방송 서비스와 지상파 디지털멀티미디어방송 자동재난경보 시스템(이하 T-DMB 재난경보방송)은 콘텐츠의 제한, 수신 기기의 제한, 단방향 서비스라는 단점이 있다. 이러한 문제점을 해결하기 위해 RSS (Rich Site Summary)를 활용한 인터넷 기반의 수신자 맞춤형 재난경보 전달시스템을 제안한다. 이를 위해 기존 사례를 분석하고, 시나리오를 작성하여 요구사항을 도출하였다. 요구사항을 기반으로 시스템을 설계하고, 설계한 결과를 테스트베드를 구현하여 검증하였다. 제안한 시스템을 활용하면 다양한 기기에서 사용자가 원하는 풍부한 정보를 얻을 수 있을 것이다.

• 대한임상검사과학회지
• /
• 제45권4호
• /
• pp.144-148
• /
• 2013

Candida spp. are yeast form fungi, which cause an opportunistic infections in a immune suppressed patients however it is a normal flora of the respiratory system, the gastrointestinal system, and the urogenital system of healthy person. It is investigated that the distribution of Candida spp. cause an oral disease from oral cavity of healthy people and also identified Candia dubliniensis. Distribution and identification of the yeast form fungi in oral cavities of healthy people was investigated by an automatic identifier, VITEK2 system. We found 21 strains of Candida albicans, 3 strains of Candida famata, one strain of Candida tropicalis, Candida haemulonii, Candida krusei, and Candida dubliniensis. In addition, one strain of Cryptococcus spp., Saccharomyces spp., and two unknown strains were isolated. Candida dubliniensis which forms a mass by more than 2 chlamydospores was isolated from a healthy person for the first time. Candida dubliniensis was not grown at $42^{\circ}C$ whereas Candida albicans was grown well. It is known that Candida dubliniencis was isolated in AIDS while it is found in healthy people from this study, which will be helpful to investigate the distribution of Candida spp.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.371-378
• /
• 1999

This paper presents an efficient algorithm for loss reduction of distribution system by automatic sectionalizing switch operation in large scale distribution systems of radial type. Simulated Annealing algorithm among optimization techniques can avoid escape from local minima by accepting improvements in cost, but the use of this algorithm is also responsible for an excessive computation time requirement. To overcome this major limitation of Simulated Annealing algorithm, we may use advanced Simulated Annealing algorithm. All constaints are divided into two constraint group by using perturbation mechanism and penalty factor, so all trail solutions are feasible. The polynomial-time cooling schedule is used which is based on the statistics calculation during the search. This approaches results in saving CPU time. Numerical examples demonstrate the validity and effectiveness of the proposed methodology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.335-337
• /
• 1998

This paper presents a efficient algorithm for loss reduction of distribution system by automatic sectionalizing switch operation in distribution systems of radial type. Simulated Annealing can avoid escape from local minima by accepting improvements in cost, but the use of this algorithm is also responsible for an excessive computation time requirement. To overcome this major limitation of Simulated Annealing Algorithm, we may use advanced Simulated Annealing Algorithm. Numerical examples demonstrate the validity and effectiveness of the proposed methodology.

• 한국유통학회지:유통연구
• /
• 제7권1호
• /
• pp.1-20
• /
• 2002

Many of logistics-related research in automobile industry has focused on inbound logistics and procurement. Research into outbound logistics is relatively few. As a starting research into outbound logistics in automobile industry, this paper examined its logistics network problems with three aspects - location strategy, inventory strategy and transportation strategy. We proposed alternatives of logistics network design resolution, and presented three practical scenarios based on those alternatives. Based on interview, on-site visit and internal data collection processes, we identified major domestic outbound logistics problems such as redundant logistics bases, inefficient delivery policy, insufficient inventory capacity, inventory stock quality deterioration, inefficient transportation system, and etc. In order to cope with those problems, we proposed such strategic alternatives as introduction of hub-and-spoke system, integration of logistics bases, introduction of (automatic) parking building, diversification of transportation mode, and etc. At the same time, we constructed three practically executable scenarios based on those ideas. The first is "Center Hub" scenario, the second is "Metropolitan Hub" scenario. The third and last scenario is "Regional Consolidation of Warehouses (distribution centers)".

• 한국군사과학기술학회지
• /
• 제13권3호
• /
• pp.461-469
• /
• 2010

In this paper, we have proposed an improved fusion method of detection features which can enhance the detection probability under the given false alarm rate in the prescreening stage of SAR ATR(Synthetic Aperture Radar Automatic Target Recognition) system. Since the detection features have the positive correlation, the detection performance can be improved if the joint probability distribution of detection features is considered in the fusion process. The detection region is designed as a simple piecewise linear function which can be represented by few parameters. The parameters for the detection region can be derived by training the sample SAR images to maximize the detection probability with the given false alarm rate. Simulation result shows that the detection performance of the proposed method is improved for all combinations of detection features.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2000

To reduce the maintenance expense, and the possibility of electric outage and accident, we should optimize the outdoor insulation system. And for the optimization, accurate measurement for the degree of contamination with climatic conditions, such as wind, rain, and drought, should be carried. However the classical measuring method, brush wiping, has some problems in the aspect of man power, reliability, and expense. In this paper, we propose two type apparatus, which could detect the degree of contamination on insulators in outdoor insulation system, such as transmission and distribution line insulator and bushing. One use the leakage current, and the other use the oscillating frequency to check the degree of contamination. To avoid the oxidation of electrode AC source, and the low degree of contamination was applied. From the result of this investigation we could get the good relationship between the degree of contamination and the leakage current and oscillating frequency