• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2859-2865
• /
• 2011

The welded connection is known as an essential factor for establishing qualified construction and/or maintenance of wrapped steel pipe. In this study, welded connection conditions in the coated pipes with large diameter (over 700 mm) in Korea water distribution systems were estimated for suggesting technically and economically available welded connection method. For the study analysis, current steel pipe usage and accident cases were investigated. In addition, the characteristics of each welded connection method and automatic or manual connection techniques were also compared and estimated. As results, automatic welded connection method is superior than manual welded connection method in aspect of pure construction cost (average 9%) or pure welded connection cost (average 13.5%). When the poor welding-working situations in Korea are considered such as high tolerance of out-of-roundness in KS regulation, a number of lap joint welded connections, the real cost benefits of automatic welded connection should be much higher than those of manual welded connections.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.126-131
• /
• 2000

Capability and performance of the pliers type coupling device for connection of sea eel pots to loop of main line and automatic separating system were investigated at sea as first trial of developing automatic operating system for sea eel pot fishing boat. Obtained main results are as follows. 1. Maximum tensile load of the pliers type coupling device when connection with high twist PP dan-line as a loop of main line was 1603 N, higher than when connection with low twist PP twine 1379 N. 2. A retention ratio of sea eel pots from main line by connecting with coupling device was successful 100% with high performance without any loss in the sea. 3. A ratio of automatic disconnection between sea eel pots using coupling device and loop of main line was perfect 100% without any trouble.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.341-352
• /
• 2016

Manual 3D pipeline modeling from LiDAR scanned point cloud data is laborious and time-consuming process. This paper presents a method to extract the pipe, elbow and branch information which is essential to the automatic modeling of the pipeline connection. The pipe geometry is estimated from the point cloud data through the Hough transform and the elbow position is calculated by the medial axis intersection for assembling the nearest pair of pipes. The branch is also created for a pair of pipe segments by estimating the virtual points on one pipe segment and checking for any feasible intersection with the other pipe's endpoint within the pre-defined range of distance. As a result of the automatic modeling, a complete 3D pipeline model is generated by connecting the extracted information of pipes, elbows and branches.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.67-70
• /
• 2002

In this paper, we have researched a Automatic Power Factor Correction and THD reduction System for the multiple connection of CFL. Also in this paper, the power factor has been researched for the design of CFL, found the reason why the power factor is low and THD is too high. This paper has designed the PFC System for the multiple connection of CFL, and then we have increased the power factor and reduced the total harmonic distortion, by implementing them.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.04b
• /
• pp.397-404
• /
• 2000

The research of the computer-aided analysis and design of steel structures has continuously evolved. Despite the importance of connection in steel structures, the design process of connections is inefficient in present. The purpose of this study is to help engineer in connection design process. In this paper, prototype of automatic connection design module in integrated system for steel structures is proposed. The main methodology is based on bottom-up approach to simplify and formalize product model. Expert system is used to help engineer for selecting steel connection type. Object-oriented analysis and modeling will improve the expansion of knowledge-base. The design for connection was done according to the design specifications of connections of AISC

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.305-312
• /
• 2003

Recently, with a progressive development of hardware of computer, the internet and network technology, the environment of construction varies rapidly due to increase the complex form in structure shape and system. With variations, the CAD system for design and products also varies from 2D system to 3D system. This study mainly deals with the methodology of automatic connection design of 3D CAD system, steel connection system (XSteel) using macro. First, using design program in the steel connection system, Xsteel, the joint connection macro will be made up and established the detail classes of design. The next, Database Program (Converter Program) related to the general structural analysis program (MIDAS) and the steel connection program (Xsteel) is constructed for data interface between two programs. From this study, if the merits of 3D CAD system and converter program are utilized well, it is expected that the time needed in modeling and the amounts due to material loses decrease gradually.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2112-2115
• /
• 2003

In this paper, we describe a SSAS (stepping stones attack simulator) that is automatic tool for testing and evaluation in TCP connection traceback system. The SSAS can pass multiple hosts that are included with hacker, middle-path hosts and victim’s system. And SSAS can also attack through commands to exploit the victim’s system. Usually, hackers do not expose their real attack positions through compromising the middle-path hosts like stepping-stones. Namely, hackers perform the stepping stones attacks in Internet. The SSAS can be utilized by developments and tests of the various countermeasure techniques of hacking. Specially, in this paper, it is used to test the performance of TCP connection traceback system.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.33-38
• /
• 2022

A solar power generation system uses a solar module that collects solar radiation energy, a connecting board that collects DC power generated from the solar module, and a diode to prevent reverse current from flowing from an inverter to the solar module. The existing photovoltaic connection module consists of only fuses and diodes for reverse polarity and overcurrent blocking, and does not have fire diagnosis, prevention, and suppression functions in the event of a fire. To solve this problem, this paper presents a method to monitor the internal state of the photovoltaic connection module using several sensors and to prevent and extinguish a fire using solenoid valves and fire extinguishing agents when a fire is detected. Through the experiment, it was confirmed that the proposed method normally suppresses the fire in event of a fire.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.110-118
• /
• 2003

The paper describes a design process of the connection control function that performs overall procedures of optical network control system in the Next Generation - Synchronous Digital Hierarchy (NG-SDH) based transport system. Here, the NG-SDH means a new SDH technology that could perform automatic connection control with a granularity of VC-3 (about 50M) or VC-4 (about 150M) according to the increase and decrease of traffic, which is different from the existing technology that could perform connection control only with a granularity of a physical SDH link (STM-l, STM-4, STM-16, STM-64, STM-256 etc). The NG-SDH based connection control allows an ingress NG-SDH node to control the appropriate connection establishment process according to connection types such as Permanent Connection (PC), Soft Permanent Connection (SPC), Switched Connection (SC) over various SDH and Ethernet line cards.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1271-1274
• /
• 1997

The industrial automation market encompasses all aspects of the discrete process in the manufactring industries. Nowadays many manufacturers are increasingly moving to increase plant capacity, and are trying to produce better quality at the lower costs. We have studied a modern projection-automation system to achieve the communication network which makes connection among all of the projection machines and connect them to a central computer. This communication system have to be very flexible and fast. Also we have studied the communication interface for the automatic production system including the hardware elements and the communication software.