• Journal of Korea Water Resources Association
• /
• v.54 no.10
• /
• pp.747-757
• /
• 2021

Quantification of extreme rainfall is very important in establishing a flood protection plan, and a general measure of extreme rainfall is expressed as an T-year return level. In this study, a method was proposed for quantifying spatial distribution and uncertainty of daily rainfall depths with various return periods using a hierarchical Bayesian model combined with climate and geographical information, and was applied to the Seoul-Incheon-Gyeonggi region. The annual maximum daily rainfall depth of six automated synoptic observing system weather stations of the Korea Meteorological Administration in the study area was fitted to the generalized extreme value distribution. The applicability and reliability of the proposed method were investigated by comparing daily rainfall quantiles for various return levels derived from the at-site frequency analysis and the regional frequency analysis based on the index flood method. The uncertainty of the regional frequency analysis based on the index flood method was found to be the greatest at all stations and all return levels, and it was confirmed that the reliability of the regional frequency analysis based on the hierarchical Bayesian model was the highest. The proposed method can be used to generate the rainfall quantile maps for various return levels in the Seoul-Incheon-Gyeonggi region and other regions with similar spatial sizes.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.303-303
• /
• 2017

Japanese agriculture has faced to several threats: aging and decrease of farmer population, global competition, and the risk of climate change as well as harsh and variable weather. On the other hands, the number of large scale farms is increasing, because farm lands have been being aggregated to fewer numbers of farms. Cost cutting, development of efficient ways to manage complicatedly scattered farm lands, maintaining yield and quality under variable weather conditions, are required to adapt to changing environments. Information and communications technology (ICT) would contribute to solve such problems and to create innovative technologies. Thus we have been developing an early warning and decision support system to reduce weather and climate risks for rice, wheat and soybean production in Japan. The concept and prototype of the system will be shown. The system consists of a weather data system (Agro-Meteorological Grid Square Data System, AMGSDS), decision support contents where information is automatically created by crop models and delivers information to users via internet. AMGSDS combines JMA's Automated Meteorological Data Acquisition System (AMeDAS) data, numerical weather forecast data and normal values, for all of Japan with about 1km Grid Square throughout years. Our climate-smart system provides information on the prediction of crop phenology, created with weather forecast data and crop phenology models, as an important function. The system also makes recommendations for crop management, such as nitrogen-topdressing, suitable harvest time, water control, pesticide spray. We are also developing methods to perform risk analysis on weather-related damage to crop production. For example, we have developed an algorism to determine the best transplanting date in rice under a given environment, using the results of multi-year simulation, in order to answer the question "when is the best transplanting date to minimize yield loss, to avoid low temperature damage and to avoid high temperature damage?".

• Korean Journal of Oriental Medicine
• /
• v.13 no.2 s.20
• /
• pp.47-52
• /
• 2007

In Oriental medicine, the status of tongue is the important indicator to diagnose one's health, because it represents physiological and clinicopathological changes of inner parts of the body. The method of tongue diagnosis is not only convenient but also non-invasive, therefore, tongue diagnosis is one of the most widely used in Oriental medicine. But tongue diagnosis is affected by examination circumstances a lot. It depends on a light source, degrees of an angle, doctor's condition and so on. So it is not easy to make an objective and standardized tongue diagnosis. As part of way to solve this problem, in this study, we tried to design a discriminant function for white and yellow coating with multi-dimensional color vectors. There were 62 subjects involved in this study, among them 48 subjects diagnosed as white-coated tongue and 14 subjects diagnosed as yellow-coated tongue by oriental doctors. And their tongue images were acquired by a well-made Digital Tongue Diagnosis System. From those acquired tongue images, each coating section were extracted by oriental doctors, and then mean values of multi -dimensional color vectors in each coating section were calculated. By statistical analysis, two significant vectors, R in RGB space and H in HSV space, were found that they were able to describe the difference between white coating section and yellow coating section very well. Using these two values, we designed the discriminant function for coating classification and examined how good it works. As a result, the overall accuracy of coating classification was 98.4%. We can expect that the discriminant function for other coatings can be obtained in a similar way. Furthermore, if an automated segmentation algorithm of tongue coating is combined with these discriminant functions, an automated tongue coating diagnosis can be accomplished.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.174-182
• /
• 2002

The object-oriented design methods and their CASE tools are widely used in practice by many real-time software developers. However, object-oriented CASE tools require an additional step of identifying tasks from a given design model. Unfortunately, it is difficult to automate this step for a couple of reasons: (1) there are inherent discrepancies between objects and tasks; and (2) it is hard to derive tasks while maximizing real-time schedulability since this problem makes a non-trivial optimization problem. As a result, in practical object-oriented CASE tools, task identification is usually performed in an ad-hoc manner using hints provided by human designers. In this paper, we present a systematic, schedulability-aware approach that can help mapping real-time object-oriented models to multi-threaded implementations. In our approach, a task contains a group of mutually exclusive transactions that may possess different periods and deadline. For this new task model, we provide a new schedulability analysis algorithm. We also show how the run-time system is implemented and how executable code is generated in our frame work. We have performed a case study. It shows the difficulty of task derivation problem and the utility of the automated synthesis of implementations as well as the Inappropriateness of the single-threaded implementations.

• Journal of the Korean Society of Tobacco Science
• /
• v.30 no.2
• /
• pp.117-124
• /
• 2008

A solid phase microextraction (SPME) method in combination with gas chromatography/mass spectrometric techniques was used for the extraction and quantification of 12 selected agrochemical residues in tobacco. The parameters such as the type of SPME fiber, adsorption/desorption time and the extraction temperature affecting the precision and accuracy of the SPME method were investigated and optimized. Among three types of fibers investigated, polyacrylate (PA), polydimethylsiloxane (PDMS) and polydimethylsiloxane-divinylbenzene (PDMS-DVB), PDMS fiber was selected for the extractions of the agrochemicals. The SPME device was automated and on-line coupled to a gas chromatograph with a mass spectrometer. Mass spectrometry (MS) was used and two different instruments, a quadrupole MS and triple quadrupole MS-MS mode, were compared. The performances of the two GC-MS instruments were comparable in terms of linearity (in the range of 0.01$\sim$0.5 $\mu$g/mL) and sensitivity (limits of detection were in the low ng/mL range). The triple quadrupole MS-MS instrument gave better precision than that of quadrupole MS system, but generally the relative standard deviations for replicates were acceptable for both instruments (< 15%). The LODs was fully satisfied the requirements of the CORESTA GRL. Recoveries of 12 selected agrochemicals in tobacco yielded more than 80% and reproducibility was found to be better than 10% RSD so that SPME procedure could be applied to the quantitative analysis of agrochemical residues in tobacco.

• Journal of Convergence for Information Technology
• /
• v.8 no.1
• /
• pp.89-94
• /
• 2018

Recently, interest and necessity for the insect industry has been increasing. Insects, which are referred to as the second food, are being used in various fields. Interest in mass production of insects has been increasing in various fields, and the need for research on environmental analysis for them is also increasing. In some countries in other developed countries, automated breeding systems have been developed that incorporate IoT. However, it is limited to be applied to many kinds of insects, and the price is so expensive that it has not been utilized in farm households. Therefore, we have carried out a study to make an optimal system that can be used practically in a farmhouse. Protaetia brevitarsis used for medicinal and edible purposes. It automatically checks the moisture of sawdust medium, which has the greatest influence on the environment of the slugs, which is the third larva of the grasshopper, and informs the result through the LED. It is applied to the environment to create an optimal breeding environment. I want to make it.

• Proceedings of the Korea Information Assurance Society Conference
• /
• 2004.05a
• /
• pp.3-8
• /
• 2004

The majority of recent intrusions reveal that the attackers do not use the previous intrusion techniques or network flaw, rather they tend to use the vulnerabilities residing inside the program, which are the running programs on the system or the processes for the service. Therefore, the security managers must focus on updating the programs with lots of time and efforts. Developers also need to patch continuously to update the program, which is a lot of burden for them. In order to solve the problem, we need to understand the vulnerabilities in the program, which has been studied for some time. And also we need to analyze the functions that contains some vulnerabilities inside. In this paper, we first analyzed the vulnerabilities of the standard C library, and Win32 API functions used in various programs. And then we described the design and implementation of the automated scanning tool for writing secure source code based on the analysis.

• Atmosphere
• /
• v.24 no.1
• /
• pp.17-27
• /
• 2014

In this study, the observational environment for sunshine duration at Seoul and Daegu Automated Synoptic Observing Systems (ASOSs) was analyzed using a numerical model. In order to analyze the effects of topography and buildings on observational environment for sunshine duration, the model domains including the elevated building and mountainous areas around Seoul and Daegu ASOSs were considered. Three dimensional topography and buildings used as input data for the numerical model were constructed using a geographic information system (GIS) data. Solar azimuth and altitude angles calculated for the analysis period (one-week for each season in 2008) in this study were validated against those by Korea Astronomy and Space Science Institute (KASI). The starting and ending times of sunshine duration observed at ASOSs largely differed from the respective sunrise and sunset times simply calculated using solar angles and information of ASOSs' latitude and longitude, because uneven topography and elevated buildings around ASOSs cut off sunshine duration right after the sunrise and right before the sunset. The model produced the sunshine indices for Seoul and Daegu ASOSs with the time interval of one minute and the period of one week for each season and we compared the hourly averaged indices with those observed at the ASOSs. One week of which the cloudiness is lowest for each season is selected for analysis. Not only the adjacent buildings but also distant buildings and mountain cut off sunshine duration right after the sunrise and right before the sunset. The buildings and topography cutting off sunshine duration were found for each analyzing date. It was suggested that, in order to evaluate the observational environment for sunshine duration, we need to consider even the information of topography and/or building far away from ASOSs. This study also showed that the analyzing method considering the GIS data is very useful for evaluation of observational environment for sunshine duration.

• Biomedical Science Letters
• /
• v.8 no.4
• /
• pp.235-244
• /
• 2002

This study was carried out to determine the blood and milk progesterone by enzyme-linked immunosorbent assay (ELISA), and milk urea nitrogen (MUN) in cows. MUN and protein concentration were determined using automated infared procedures. The optimum conditions of ELISA system was investigated including the first and second antibody titres, bound percent, and enzyme conjugate and also the factors on MUN and protein concentration by sampling procedures and addition of preservatives. Progesterone antibodies did not react to pregnenlone, testosterone, estrone, estradiol-l7$\beta$, aldosterone, cortisol, corticosterone and 11$\alpha$-dehydroxycortisone (DOC), but reacted with only progesterone. The intra and inter-assay coefficient of variation 4.5%, 6.1~9.4% when used of bovine serum. The morning, MUN concentration (17.6$\pm$2.8 mg/100 ml) in the 13 herds was similar to that of evening MUN concentration of the lactating cows from the same herd. A significant relationship between morning and evening milk samples of upper parameters was found r=0.93. Difference in MUN concentration with sampling procedures and using of preservatives were investigated.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.215-219
• /
• 2012

Objectives: The purpose of this study was to investigate the screw-in effect and torque generation depending on the size of glide path during root canal preparation. Materials and Methods: Forty Endo-Training Blocks (REF A 0177, Dentsply Maillefer) were used. They were divided into 4 groups. For groups 1, 2, 3, and 4, the glide path was established with ISO #13 Path File (Dentsply Maillefer), #15 NiTi K-file NITIFLEX (Dentsply Maillefer), modified #16 Path File (equivalent to #18), and #20 NiTi K-file NITIFLEX, respectively. The screw-in force and resultant torque were measured using a custom-made experimental apparatus while canals were instrumented with ProTaper S1 (Dentsply Maillefer) at a constant speed of 300 rpm with an automated pecking motion. A statistical analysis was performed using one-way analysis of variance and the Duncan post hoc comparison test. Results: Group 4 showed lowest screw-in effect ($2.796{\pm}0.134$) among the groups (p < 0.05). Torque was inversely proportional to the glide path of each group. In #20 glide path group, the screw-in effect and torque decreased at the last 1 mm from the apical terminus. However, in the other groups, the decrease of the screw-in effect and torque did not occur in the last 1 mm from the apical terminus. Conclusions: The establishment of a larger glide path before NiTi rotary instrumentation appears to be appropriate for safely shaping the canal. It is recommended to establish #20 glide path with NiTi file when using ProTaper NiTi rotary instruments system safely.