• ETRI Journal
• /
• 제33권2호
• /
• pp.259-266
• /
• 2011

We present a new method for an automated markerless system to describe, analyze, and classify human gait motion. The automated system consists of three stages: I) detection and extraction of the moving human body and its contour from image sequences, ii) extraction of gait figures by the joint angles and body points, and iii) analysis of motion parameters and feature extraction for classifying human gait. A sequential set of 2D stick figures is used to represent the human gait motion, and the features based on motion parameters are determined from the sequence of extracted gait figures. Then, a k-nearest neighbor classifier is used to classify the gait patterns. In experiments, this provides an alternative estimate of biomechanical parameters on a large population of subjects, suggesting that the estimate of variance by marker-based techniques appeared generous. This is a very effective and well-defined representation method for analyzing the gait motion. As such, the markerless approach confirms uniqueness of the gait as earlier studies and encourages further development along these lines.

• International Journal of Computer Science & Network Security
• /
• 제23권11호
• /
• pp.32-42
• /
• 2023

The paper describes the new approaches to the automated analysis of curricula according to the higher education standard. The analysis process is proposed to carry out in two ways: (a) the analysis of completeness and sufficiency of curricula according to the standard of higher education; (b) the comparison of curricula of the same qualification and specialty. The problem of improving the quality of university students' training launches the process of monitoring and analyzing educational curricula and their correspondence to the higher education standard. We developed the rules and methods to compare curricula. In addition, we implemented the automated system of curricula comparison. The paper reveals the use of these methods based on the analysis of the curriculum bachelor level of higher education "Informatics", specialty "Computer science", at the Faculty of Computer Science and Cybernetics of the Taras Shevchenko National University of Kyiv. The findings put towards the idea that the implementation of developed methods as well as the automated system of curricula analysis will improve the educational services by higher education institutions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.711-715
• /
• 1996

This paper describes an automated computer-aided engineering (CAE) system for micromachines whose size range 10 to 10$^3$${\mu}{\textrm}{m}$. An automatic finite element mesh generation technique, which is based on the fuzzy knowledge processing and computational geometry techniques, is incorporated into the system, together with one of commercial finite clement (FE) analysis codes, MARC, and one of commercial solid modelers, Designbase. The system allows a geometry model of concern to be a automatically converted to different FE models, depending on physical phenomena to be analyzed, i.e. electrostatic analysis, stress analysis, modal analysis and so on. The FE analysis models are then exported to the FE analysis code, and then analyses are performed. This system is successfully applied to an electrostatic micro actuator.

• 산업공학
• /
• 제20권4호
• /
• pp.438-447
• /
• 2007

This paper presents an aspect-oriented approach to simulation design and analysis in system design phase for integrated logistics system simulation. The integrated logistics system composed of AS/RS (Automated Storages and Retrieval System), AGVs (Automated Guided Vehicle System), STVs (Sorting Transfer Vehicle System) and Conveyor System is designed by using the aspect-oriented approach and UML (Unified Modeling Language). The multi-factorial design of experiments and regression analysis are used for design parameters of the system and Evolution Strategies is used to verify each parameter. Aspect-oriented approach for the integrated logistics system simulation shows the advantages of code reusability, extendible, modulation, easy improvement and a better design technique.

• 한국정보통신학회논문지
• /
• 제14권1호
• /
• pp.225-232
• /
• 2010

용접부 내에 존재하는 결함의 형태, 위치, 크기 등의 정보를 정량적으로 파악하기 위하여 초음파 탐상 검사가 많이 활용되는데, 최근 들어 용접부의 결함 탐상을 위해, 검사과정을 기계적 스캐너로 자동화한 자동 초음파 탐상 시스템이 많은 산업 분야에서 활용되고 있고, 특히 배관 용접부의 건전성 평가를 위한 비파괴안전진단에서 그 활용 폭이 커지고 있다. 본 논문에서는 배관 용접부의 자동 초음파 검사를 위한 알고리즘 구현과 결함 영상을 보정하여 주는 결함영상 처리 시스템을 설계 및 구현하였다. 적용된 기법으로는 초음파 A-Scan 압축 알고리즘, Synthetic Aperture Focusing 알고리즘, 결함영상증폭 알고리즘과 이와 관련된 소프트웨어 설계 및 구현에 대하여 논한다.

• 산업경영시스템학회지
• /
• 제44권4호
• /
• pp.145-153
• /
• 2021

Automated Guided Vehicle (AGV) is commonly used in manufacturing plant, warehouse, distribution center, and terminal. AGV is self-driven vehicle used to transport material between workstations in the shop floor without the help of an operator, and AGV includes a material transfer system located on the top and driving system at the bottom to move the vehicle as desired. For navigation, AGV mostly uses lane paths, signal paths or signal beacons. Various predominant sensors are also used in the AGV. However, in the conventional AGV, there is a problem of not turning or damaging nearby objects or AGV in a narrow space. In this paper, a new driving system is proposed to move the vehicle in a narrow space. In the proposed driving system, two sets of the combined steering-drive unit are adopted to solve the above problem. A prototype of AGV with the new driving system is developed for the comparative analysis with the conventional AGV. In addition, the experimental result shows the improved performance of the new driving system in the maximum speed, braking distance and positioning precision tests.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권1호
• /
• pp.43-48
• /
• 2002

This paper describes an automated computer-aided engineering (CAE) system for three-dimensional structures. An automatic finite element mesh-generation technique, which is based on fuzzy knowledge processing and computational geometry techniques, is incorporated into the system, together with a commercial FE analysis code, and a commercial solid modeler. The system allows a geometry model of interest to be automatically converted to different FE models, depending on the physical phenomena of the structures to be analyzed, i.e., electrostatic analysis, stress analysis, modal analysis, and so on. Also, with the aid of multilayer neural networks, the present system allows us to obtain automatically a design window in which a number of satisfactory design solutions exist in a multi-dimensional design parameter space. The developed CAE system is successfully applied to evaluate an electrostatic micromachines.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.133-134
• /
• 2011

While researches related with construction automation have dramatically increased, a Robot-based Automatic Construction system (RCA system) has developed for high-rise buildings in Korea. At the aspect that wide adoption of the RCA system is dependent on economic efficiency comparing with a conventional method, feasibility study on the RCA system should be implemented. However, due to practical limitations, the RCA system has tested to a seven story building. Based on the test results, this study implements a cost/benefits analysis to a simulated forty story building in order to derive more reliable data on the RCA system's practicability.

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5622-5632
• /
• 2011

이 논문은 Automated Guided Vehicle(AGV)를 이용하여 운영되는 통합물류시스템의 시뮬레이션 실험설계와 분석에 관한 방법을 제시한다. 물류창고의 AGVs(Automated Guided Vehicle system) 성능을 최대로 운영하기 위해선 많은 변수들이 고려되어져야 하는데 대표적 중요 요인에는 차량 대수, 속도, 운행규칙, 부품 타입, 스케줄링, 버퍼 사이즈 등이 있다. 우리는 이 논문에서 다양한 중요요인들 중 (1)처리량 최대화, (2)차량 이용률 최대화 (3)차량 혼잡 최소화, (4)Automated Storage and Retrieval System(ASRS) 이용률 최대화를 고려하기 위해 직교배열(Orthogonal Array)로 실험계획을 수립하였고 이를 이용한 시뮬레이션 기반 분석과 진화전략(Evolution Strategy : ES)를 이용한 최적화를 각각 수행했다. 그 결과 ES에 비해 직교배열이 실험 시간과 회수를 절약하였고 두 결과에 대한 유효성 검사 또한 큰 차이를 나타내지 않았다. 따라서 본 논문에서 제시한 방법을 이용한 분석 방법은 시간, 회수 그리고 실험의 정확성에 대한 분석의 효율성을 증대시킬 것으로 예상되며 통합 물류 시스템 이외의 시스템에도 적용이 가능 할 것으로 생각된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.103-108
• /
• 1999

This paper describes development of a new automated real-time system which preforms measurement data reduction and management, geotechnical backanalysis, and feedback design for embankment construction on soft ground. Such a system can be an effective, useful and economical tool for managing a large site development on soft ground. The system consists of data base system to characterize soil properties and identify instrumentation, analysis system for ground behavior and stability coupled with automatic monitoring system, and feedback design system which is a new technique to reflect the analysis of measured ground behavior against original design.