• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.117-139
• /
• 1999

This paper is concerned about the hybrid tandem configuration as the design of the automated guided vehicle system(AGVs). The hybrid tandem configuration is that the manufacturing system is divided into several non-overlapping zones, workstations of each zone are linked by network configuration including loop. That is, the manufacturing system is divided into several non-overlapping small size networks, and at most two automated guided vehicles can be available in each network. The transit point is located at proper point between adjacent networks. The parts are transported to workstations in other network through the transit points. One of the objective functions in dividing into the hybrid tandem configuration is to minimize the maximum travel time of the divided networks, and other is to minimize the total travel distance of parts moved to workstations in other networks for the next processing. The model formulation is presented, and a numerical example is shown. Also, the performances of system for the hybrid tandem, tandem and network configuration are compared through the simulation. The results of this research will contribute to the development of material handling systems in the manufacturing system. Also, it will be applied in determining the transportation area of transportation vehicles and the number and size of the transportation fleet in the transportation problem of logistics management.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.478-487
• /
• 2018

Pyroprocessing technology has been regarded as a promising solution for recycling spent fuel in nuclear power plants. The Korea Atomic Energy Research Institute has been studying the current status of equipment and facilities for pyroprocessing and found that existing facilities are manually operated; therefore, their applications have been limited to laboratory scale because of low productivity and safety concerns. To extend the pyroprocessing technology to a commercial scale, the facility, including all the processing equipment and the material-handling devices, should be enhanced in view of automation. In an automated pyroprocessing facility, a supervised control system is needed to handle and manage material flow and associated operations. This article provides a preliminary design of the supervising system for pyroprocessing. In particular, a manufacturing execution system intended for an automated pyroprocessing facility, named Pyroprocessing Execution System, is proposed, by which the overall production process is automated via systematic collaboration with a planning system and a control system. Moreover, a simulation-based prototype system is presented to illustrate the operability of the proposed Pyroprocessing Execution System, and a simulation study to demonstrate the interoperability of the material-handling equipment with processing equipment is also provided.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1061-1068
• /
• 2013

In this research, the design optimization of a composite sandwich has been performed for using as an airplane wing skin. Automated analysis framework for aero-structure interaction is used for calculating load data on the wing. For automated analysis framework, FLUENT is used for computational fluid dynamics (CFD) analysis. CFD mesh is generated automatically by using parametric modeling of CATIA and GAMBIT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Composite sandwich optimization is performed by NASTRAN SOL200. Design variables are thicknesses of the sandwich core and composite skin panel plies. The objective is to minimize the weight of the wing and constraints are applied for wing tip displacement, global failure index and local failure indexes.

• 한국CDE학회논문집
• /
• 제9권2호
• /
• pp.93-101
• /
• 2004

In mechanical design, optimization procedures have mostly been implemented solely by CAE codes combined by optimization routine, in which the model is built, analyzed and optimized. In the complex geometries, however, CAD is indispensable tool for the efficient and accurate modeling. This paper presents a method to carry out optimization, in which CAD and CAE are used for modeling and analysis respectively and integrated in an optimization routine. Application Programming Interface (API) function is exploited to automate CAD modeling, which enables direct access to CAD. The advantage of this method is that the user can create very complex object in Parametric and automated way, which is impossible in CAE codes. Unigraphics and ANSYS are adopted as CAD and CAE tools. In ANSYS, automated analysis is done using codes made by a script language, APDL(ANSYS Parametric Design Language). Optimization is conducted by VisualDOC and IDESIGN respectively. As an illustrative example, a mold design problem is studied, which is to minimize temperature deviation over a diagonal line of the surface of the mold in contact with hot glass.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.214-218
• /
• 1995

Much labor, an exceedingly long lead time, and the skills of experienced engineers are required for press tool design. To reduce such problems, several CAD systems for blanking or piercing have been developed. This paper describes a computer-aided design for blanking or piercing of irregularly shaped sheet metal products. An approach to the system is based on knowledge base rules. The process planning & die design system is designed by considering several factors, such as complexity of blank geometry, punch profile, and availability of press equipment and standard parts. Therefore, after checking a production feasibility for irregular shaped sheet metal products, this system which is implemented strip layout module can carry out a process planning and generate the strip layout in graphic forms. Also this system implemented die layout module can carry out a die design for each process which is obtained form the result of an automated process planning and generate parts and assembly drawing of a die set.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.224-235
• /
• 2014

Recently, Productivity of the construction industry has been decreasing than other industries. Because of this, BIM is being spread in the construction industry. However, quality criteria for BIM data is insufficient. Regulation information is an important factor for initial architectural design evaluations. However, building code and related regulation are numerous. National building code structure in Korea is much more complex than other countries. The purpose of this study is to suggest the typology method of building code and apply to real regulations. To achieve this purpose, the authors have extracted required information to from original regulation for code checking and suggested mapping methods between extracted information and information of IFC scheme. In addition, the authors have represented EXPRESS-G diagram for extracting information from IFC scheme and suggested code checking method through stair case. Output of this study can be used as a base line data for automated code checking system based on open BIM. Automated code checking system will be utilized in architectural design evaluations and supported to increase design quality. It can be used to mount in SEUMTER that is the construction administration system of Ministry of Land, Infrastructure and Transport (MOLIT).

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1014-1022
• /
• 2002

An objective of Automated Highway Systems (AHS) is to increase the safety and throughput of the existing highway infrastructure by introducing traffic automation. AHS is an example of a large scale, multiagent complex dynamical system and is ideally suited for a hierarchical hybrid controller. We discuss a design issue of efficient hybrid controllers for the platoon maneuvers on AHS. For the modeling of a hybrid system including the merge and split operations, a safety distance policy is introduced for the merge and split operations. After that, the platoon system will be modeled by a hybrid system In addition, a hybrid controller for the proposed merge and split operation models is presented. Finally, the performance of the proposed hybrid control scheme is demonstrated via scenarios for platoon maneuvers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.372-376
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. In this paper, an electro-mechanical actuator for clutch-by-wire (CBW) system is implemented as the first stage for the development of automated manual transmissions. The prototype of CBW actuator is designed systematically, which is composed of the electric motor, worm & worm wheel and crank mechanism. And the test rig is developed to perform the basic function test for the automatic clutch actuation. The developed prototype is validated by the experimental results on the test rig.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.132-138
• /
• 2006

With a great requirement of innovation caused by severe competition current companies are encouraged to improve bottleneck areas in production procedure. Specially a chassis line in which assembly processes are mainly carried out manually has the large potential to be automated. The putting of spare tire in trunk in chassis line is still dominated by free dropping method. Through that, parts in trunk such as luggage room lamp, jack and so on were damaged and the complaint of assembler in the next process was occurred due to physical strength. To eliminate these, tile robot system was in this paper developed to place spare tire on the mounting hole in trunk. The movement of robot was synchronized with the velocity of chassis hanger. With this automated system the productivity of the chassis line was increased from the benefits such as simplification of the system using only robot without the mechanically synchronized transport, inserting spare tire into the right position with robot, reduction of damaged parts and production of various type of car.

• 대한산업공학회지
• /
• 제30권4호
• /
• pp.306-316
• /
• 2004

We present a closed form approximate analytical model to estimate the expected waiting times for the storage and retrieval requests of an automated storage/retrieval (AS/R) system, assuming that the storage/retrieval (S/R) machine idles either at the rack or at the input/output point. The expected waiting times (and the associated mean queue lengths) can play an important role to decide whether the performance of a stable AS/R system is actually acceptable, to determine buffer size (or length) of the input conveyor, and to compute the number of the rack openings which is required to hold the loads which are requested by processing machines but waiting in the rack to be retrieved by the SIR machine. This model can be effectively used in the early design stage of an AS/R system.