• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.131-135
• /
• 2003

Callus and cell suspension cultures of Eurycoma longifolia Jack were initiated from leaves of different trees. The leaf explant of tree Eu9 produced the most calli and also induced high cell biomass in the cell suspension culture. Optimum production of cell biomass could be initiated in proliferating culture medium with a pH of 5.75 prior to autoclaving. The effects of macronutrient inorganic salts of Murashige and Skoog (MS) liquid medium supplemented with X on production of cell biomass of Eurycoma longifolia were also investigated. The highest cell biomass was produced in MS medium containing macronutrients of $21\;mM\;NH_4NO_3,\;12.25\;mM\;KNO_3,\;3.00\;mM\;CaCl_2.2H_2O,\;0.575\;mM\;MgSO_4.7H_2O$, and $1.83\;mM\;KH_2PO_4$. A new medium labeled as TAM was formulated for the production of Eurycoma longifolia cell biomass in the cell suspension culture.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.5
• /
• pp.683-687
• /
• 1996

Jujube paste was prepared by autoclaving the fresh jujube at 1.2 atm and $120^{\circ}C$ for 30 min and removing the skin and cores. In order to increase the juice yield, the paste was treated with pectinase, cellulase and their combinations. The soluble fractions of enzymatically treated jujube paste were characterized in terms of yield, pH, titratable acidity, color, Bx, transmittance and sugar compositions. The original paste exhibited the water soluble fraction of 57.3%. Of various quality factors, the clarity was the most significantly distinguished between pectinase and cellulase treatments. The cellulase treatment produced the cloudy juice with the yield of 83.60%. On the other hand, the clear juice was produced by the pectinase and combined treatments due to degradation of pectins, whose yields were 79.47% and 85.39%, respectively. The results clearly demonstrated that the pectinase treatments improved the solubilization efficiency and clarity.

• Preventive Nutrition and Food Science
• /
• v.2 no.2
• /
• pp.101-108
• /
• 1997

A lactic acid bacterium LAB3113, isolated from traditionally fermented Kimchi was found to produce bacteriocin whose activity was very specific toward lactobacilli and not effective against any other bacteria. Lactobacilli affected by the inhibitory substance included Lactobacillus delbrueckii-lactis, L. johnsonii, L. gsseri, and L. curvatus. Based upon biochemical and physiological characteristics, LAB3113 was classified as Lactococcus lactis, and its bacteriocin was named as lactococcin K3113. Lactococcus lactis. LAB3113 produced bacteriocin at th early stage of growth and the concentration of the bacteriocin did not decrease even after alt stationalry phase. Optimal temperature of bacteriocin production was $25^{\circ}C$ at the initial pH 7.0. Partially purified lactococcin K3113 was completely inactivated by protease, but not affected by lipase, lysozyme and RNase. The bacteriocin was very heat-stable even after autoclaving for 20 min. It was also stable in pH changes, an was not affected by th presence of solvents. lacotococcin K3113 appeared to act in bactericidal mode against L. delbrueckii-lactis ATCC4797. Molecular weight of lactococcin K3113 was calibrated as 10,500 dal by SDS-PAGE an activity staining. Lactococcus lactis LAB3113 had four residential plasmids of 3.7kb, 11.2kb, 15.5kb, and 48kh in molecular sizes. Plasmid profile analysis of mutant strain revealed that 15.5 kb plasmid was re-sponsible for the production of lactococcin K3113 and its immunity to the bacteriocin.

• Journal of Periodontal and Implant Science
• /
• v.43 no.5
• /
• pp.221-226
• /
• 2013

Purpose: This study aimed to assess the combined effect of dismantling before sterilization and aging on the accuracy (${\pm}10%$ of the target torque) of spring-style mechanical torque devices (S-S MTDs). Methods: Twenty new S-SMTDs from two different manufacturers (Nobel Biocare and Straumann: 10 of each type) were selected and divided into two groups, namely, case (group A) and control (group B). For sterilization, 100 cycles of autoclaving were performed in 100 sequences. In each sequence, 10 repetitions of peak torque values were registered for aging. To measure and assess the output of each device, a Tohnichi torque gauge was used (P<0.05). Results: Before steam sterilization, all of the tested devices stayed within 10% of their target values. After 100 cycles of steam sterilization and aging with or without dismantling of the devices, the Nobel Biocare devices stayed within 10% of their target torque. In the Straumann devices, despite the significant difference between the peak torque and target torque values, the absolute error values stayed within 10% of their target torque. Conclusion: Within the limitations of this study, there was no significant difference between the mean and absolute value of error between Nobel Biocare and Straumann S-S MTDs.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.1
• /
• pp.100-105
• /
• 2005

This study was conducted to investigate the extraction characteristics of the polysaccharide from Jeseng mushroom (Fomitopsis pinicola Jeseng). Yields of the polysaccharide extracted from powdered mushroom by autoclaving(120, 30 min) with water at different pH and salt concentration were 8.2～9.2% in pH 5～11, 4.7～5.5% in 1～5% salt solution, respectively. The yield by the 0.05～1.0 N KOH-extraction was ranged 3.45～13.20%, while that by HAS-extraction(homogenizing after KOH swelling) using 1～2.5 N KOH 73.6～78.4%. Content of carbohydrate, protein, lipid and ash of the crude polysaccharide extracted from fruits body and its cultured mycelium by method of water extraction, KOH extraction(0.005～1N) and HAS-extraction were ranged 86.5～92.6%, 2.3～13.1%, 0.1～4.2% and 0.1～1.7%, respectively. The polysaccharide were composed of 62.0～77.8 g/g of pentose, 138.0～187.8 g/g of hexose and 21.2～117.3 mg/g of protein. From these results, the polysaccharide extracted was supposed to be a protein-bound polysaccharide.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.301-308
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProTaper Universal (PTU), ProTaper Next (PTN), and ProTaper Gold (PTG) and the effects of sterilization by autoclave on the cyclic fatigue life of nickel-titanium (NiTi) instruments. Materials and Methods: Eighty PTU, 80 PTN, and 80 PTG were included to the present study. Files were tested in a simulated canal. Each brand of the NiTi files were divided into 4 subgroups: group 1, as received condition; group 2, pre-sterilized instruments exposed to 10 times sterilization by autoclave; group 3, instruments tested were sterilized after being exposed to 25%, 50%, and 75% of the mean cycles to failure, then cycled fatigue test was performed; group 4, instruments exposed to the same experiment with group 3 without sterilization. The number of cycles to failure (NCF) was calculated. The data was statistically analyzed by using one-way analysis of variance and post hoc Tukey tests. Results: PTG showed significantly higher NCF than PTU and PTN in group 1 (p < 0.05). Sterilization significantly increased the NCF of PTN and PTG (p < 0.05) in group 2. PTN in group 3 had significantly higher cyclic fatigue resistance than PTN group 4 (p < 0.05). Also, significantly higher NCF was observed for PTG in group 2 than in groups 3 and 4 (p < 0.05). Conclusions: PTG instrument made of new gold alloy was more resistant to fatigue failure than PTN and PTU. Autoclaving increased the cyclic fatigue resistances of PTN and PTG.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.34 no.2
• /
• pp.32-37
• /
• 2017

The purpose of this study was (1) to demonstrate the anti-microbial properties of 4-hexylresorcinol (4HR) loaded silk mat and (2) comparison of bone formation between 4HR incorporated silk mat and collagen membrane. Anti-microbial properties of 4HR incorporated silk mat was done after sterilization of silk mat (autoclaving and ethylene oxide gas). For the evaluation of bone formation, bilateral bony defects (size: 8 mm) were prepared in the parietal bone of the rabbits (n=10). 4HR incorporated silk mat (size: $10{\times}10mm$) was applied on the right defect. For the comparative purpose, the same size of commercial collagen membrane was applied on the left defect. The anti-microbial properties of 4HR incorporated silk mat were maintained after sterilization process. When compared bone mineral density and bone volume, there was no statistically significant difference between groups at 4 weeks and 8 weeks after operation (p>0.05). In conclusion, 4HR incorporated silk mat could be autoclaved without concern of anti-microbial properties loss. In addition, 4HR incorporated silk mat showed similar bone regeneration to collagen membrane. Therefore, 4HR incorporated silk mat might be considered for the application of open membrane technique.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.241-246
• /
• 2014

This study is to compare characteristics of saccharification reactions applying to enzymatic hydrolysis of pretreated fallen leaves for bio-ethanol production. It experimented pretreatment of acid, alkaline in the chemical. This experiment includes preteatment of acid and alkaline in chemical, soaking, shaking and autoclaving method, which were applied to biomass. In result, the glucose production from alkaline-NaOH method was 263 mg glucose/ g biomass comparing with them of acid-HCl method. Thus, alkaline-NaOH method is superior than the acid-HCl method for chemical preteatment of fallen leaves. Also, when various chemical treatments were compared, they were all. Based on the results of this study, we found that leaves, one of biomass, are possible in pretreatment and enzymatic hydrolysis process, and they are likely to affect bio-ethanol production in the future.

• Journal of Technologic Dentistry
• /
• v.31 no.2
• /
• pp.39-44
• /
• 2009

In the orthopedic field which firstly used zirconia as artificial joints, researchers had studied the reasons for collapsing zirconia used as restorative material by accumulated inner cracks in several years and they found out Low Temperature Degradation is one of the reasons. In the dentistry field, it has not been too long since they used zirconia as the cores of all-ceramic restoration; however, the study is needed as prophylactic measure against Low Temperature Degradation which can be caused by saliva wetting the mouth all the time and frictional forces such as bite pressure and masticatory pressure. Artificial aging by autoclaving is used because there are difficulties of testing in the patient's mouth. To study the changes in the material properties, the flexural strength of dental zirconia ceramic is measured before and after the test. The following are the result of the test. 1) The zirconia blocks in the autoclaves at $130^{\circ}C$ and $200^{\circ}C$ are phase-shifted tetragonal to monoclinic by Low Temperature Degradation. 2)The non-autoclaved specimens have the average fractural strength of 1346.4MPa, the specimens autoclaved at $130^{\circ}C$ have 1226.4Mpa and the specimens autoclaved at $200^{\circ}C$ have 1024.1MPa. The tests show that as the temperature increases, the flexural strength tend to decrease and the differences are noticeable(p<0.001). 3)Through the Duncan's post-hoc test, the differences in flexural strength of the 3 groups were listed in order of strength like normal temperature>at $130^{\circ}C$ autoclave low temperature degradation> at $200^{\circ}C$ autoclave low temperature degradation.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1064-1079
• /
• 2018

In this study, the antimicrobial activity of a bacteriocin produced by Enterococcus faecalis KT11, isolated from traditional Kargı Tulum cheese, was determined, and bacteriocin KT11 was partially characterized. The results showed that bacteriocin KT11 was antagonistically effective against various Gram-positive and Gram-negative test bacteria, including vancomycin- and/or methicillin-resistant bacteria. The activity of bacteriocin KT11 was completely abolished after treatment with proteolytic enzymes (proteinase K, ${\alpha}$-chymotrypsin, protease and trypsin), which demonstrates the proteinaceous nature of this bacteriocin. Additionally, bacteriocin KT11 remained stable at pH values ranging from 2 to 11 and after autoclaving at $121^{\circ}C$ for 30 min. In addition, the activity of bacteriocin KT11 was stable after treatment with several surfactants (EDTA, SDS, Triton X-100, Tween 80 and urea) and organic solvents (chloroform, propanol, methanol, ethyl alcohol, acetone, hexane and ethyl ether). Cell-free supernatant of E. faecalis KT11 was subjected to ammonium sulfate precipitation and then desalted by using a 3.5-kDa cut-off dialysis membrane. The bacteriocin activity was determined to be 711 AU/mL in the dialysate. After tricine-SDS-PAGE analysis, one peptide band, which had a molecular weight of ~3.5 kDa, exhibited antimicrobial activity. Because the bacteriocin KT11, isolated from E. faecalis KT11, exhibits a broad antimicrobial spectrum, heat stability and stability over a wide pH range, this bacteriocin can be used as a potential bio-preservative in foods. Additionally, bacteriocin KT11 alone or in combination with conventional antibiotics may provide a therapeutic option for the treatment of multidrug-resistant clinical pathogens after further in vivo studies.