• 한국콘텐츠학회논문지
• /
• 제17권8호
• /
• pp.579-585
• /
• 2017

비다공성 표면에 유류된 지문을 현출하기 위해서는 다양한 기법을 사용할 수 있는데, 분말법은 실무에서 주로 사용되고 있는 기법 중 하나이다. 하지만 분말의 종류가 다양해짐에 따라 각각의 분말마다 권장되는 붓질(stroke) 횟수가 정해져 있지 않아 숙련된 과학수사요원이 잠재지문의 현출정도를 파악하면서 붓질을 해야 하며 현출한 결과물 또한 개개인마다 다르다. 지문 분말은 원료배합과 제조방법에 따라 분말 입자간 서로 붙는 성질이 다양하게 나타나는데 이러한 성질을 자착성(auto-adhesion)이라고 한다. 본 연구에서는 다양한 종류의 지문 분말의 자착 정도를 알아보기 위하여 슬라이드 글라스에 지문을 유류한 후 분말을 각각 1회, 3회, 5회, 10회 적용하여 현출된 지문을 광학현미경으로 배율을 달리하여 관찰하는 실험을 진행하였다. 일부 분말은 붓질 횟수가 증가함에 따라 지문 융선이 더 진하게 현출되는 결과를 보였고 반대로 일부 분말은 약한 자착성으로 인해 붓질의 횟수가 증가함에 따라 지문이 흐려지는 결과를 나타냈다. 각 분말들이 갖는 자착성의 다양함은 분말마다 브러쉬의 사용방법이 달라져야 한다는 사실을 시사하고 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.106-106
• /
• 2000

This study is to embody automatic inspection system of motor body panel by visual system. since it is inefficient to examine the adhesion condition of components with the naked eye, picture processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process. The developed automatic inspection system presents the examination method of the adhesion condition of components with a ixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.51-56
• /
• 2000

This study is to implement automatic inspection system of motor body panel by visual system. since it is inefficient to examine adhesion condition of components with the naked eye, image processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process the developed automatic inspection system presents tile examination method of the adhesion condition of components with a pixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.316.2-316.2
• /
• 2016

Device가 점점 Shrinkage 됨에 따라 미세 패터닝을 위하여 기존에 사용하던 박막은 Hardmask 로써 CD(Critical Dimension)가 제한적으로 이를 개선하기 위한 비정질 실리콘 (amorphous silicon)으로 대체하여 사용되는 Layer의 수가 증가하고 있다. 하지만 비정질 실리콘을 증착 시, 하부막에 따른 Adhesion 및 Hillocks과 같은 공정상에서 발생하는 문제들이 발생하게 되는데, 이는 소자의 특성을 떨어뜨리게 된다. 이러한 문제를 해결하고자 본 연구에서는 PECVD를 사용하여 비정질 실리콘 박막을 증착하였고, 그 특성을 분석하였으며, Adhesion 및 Hillock 개선을 위해 비정질 실리콘 박막 증착 전 처리를 최적화하여 특성을 개선하였다. 증착된 박막의 두께 및 굴절률은 Auto thickness measurement로 분석하였고, 표면 특성은 Field emission scanning electron microscopy(FE-SEM 그림 참고), 4 Point Bending TEST를 이용하여 분석을 수행하였다.

• KSBB Journal
• /
• 제32권2호
• /
• pp.146-152
• /
• 2017

Vulvovaginal candidiasis (VVC) is one of the urogenital infections occurring in women worldwide. Candida albicans is generally observed among various types of microorganisms causing VVC. Antibiotic therapy is typical, and the use of Lactobacilli probiotics is to be recognized as a promising alternative. The aim of this study was to select vaginal lactobacilli with probiotic properties against C. albicans. In a previous study, we isolated 38 lactobacilli from vagina of Korean women and 20 isolates were shown to inhibit C. albicans. We further selected 10 isolates which were able to inhibit C. albicans less than $10^5CFU/mL$. Among these selected strains, Lactobacillus salivarius MG242 (identified by 16s rRNA sequencing) was finally selected based on its strong anti-candidal activity, acid/bile salt resistance and adhesion property. Indirect adhesion activity of MG242 measured by auto-aggregation assay showed more than 60% auto-aggregation after 5 h standing. Taken these results together, the selected strain MG242 may have potential for application in vagina health related products.

• Journal of the Korean Wood Science and Technology
• /
• 제35권2호
• /
• pp.39-50
• /
• 2007

The purpose of this study was to investigate the physico-mechanical properties and characteristics on reduction of formaldehyde and total volatile organic compound (TVOC) emission from particleboard (PB) with added volcanic pozzolan. Pozzolan was added as a scavenger at the level of 1, 3, 5, and 10 wt.% of urea formaldehyde (UF) resin for PB manufacture. The moisture content, density, thickness swelling, water absorption and physical properties of PBs were examined. Three-point bending strength and internal bond strength were determined using a universal testing machine. Formaldehyde and TVOC were determined by desiccator and 20L small chamber methods. With increasing pozzolan content the physical and mechanical properties of the PBs were not significantly changed, but formaldehyde and TVOC emissions were decreased. Because pozzolan has a rough and irregular surface with porous form, it can be used as a scavenger for PBs at a content up to 10 wt.% without any detrimental effect on the physical and mechanical properties.

• Journal of Microbiology and Biotechnology
• /
• 제32권1호
• /
• pp.56-63
• /
• 2022

This study aims to determine the antibiofilm effect of cell-free supernatant (CFS) of Lactobacillus brevis strains against Streptococcus mutans strains. To study the antibiofilm mechanism against S. mutans strains, antibacterial effects, cell surface properties (auto-aggregation and cell surface hydrophobicity), exopolysaccharide (EPS) production, and morphological changes were examined. The antibiofilm effect of L. brevis KCCM 202399 CFS as morphological changes were evaluated by scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM), compared with the control treatment. Among the L. brevis strains, L. brevis KCCM 202399 showed the highest antibiofilm effect on S. mutans KCTC 5458. The antibacterial effect of L. brevis KCCM 202399 against S. mutans KCTC 5458 was investigated using the deferred method (16.00 mm). The minimum inhibitory concentration of L. brevis KCCM 202399 against S. mutans KCTC 5458 was 25.00%. Compared with the control treatment, L. brevis KCCM 202399 CFS inhibited the bacterial adhesion of S. mutans KCTC 5458 by decreasing auto-aggregation, cell surface hydrophobicity, and EPS production (45.91%, 40.51%, and 67.44%, respectively). L. brevis KCCM 202399 CFS inhibited and eradicated the S. mutans KCTC 5458 biofilm. Therefore, these results suggest that L. brevis KCCM 202399 CFS may be used to develop oral health in the probiotic industry.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.207-215
• /
• 2009

Purpose: The aim of the present study is to evaluate the long term bone healing after horizontal ridge augmentation using auto block bone graft for implant installation timing. Materials and Methods: Five Beagle dogs(which were 14 months old and weighted approximately 10kg). In surgery 1(extraction & bone defect), premolars(P2, P3,P4) were extracted and the buccal bone plate was removed to create a horizontally defected ridge. After three months healing, in surgery 2(ridge augmentation). Auto block bone grafts from the mandibular ramus were used in filling the bone defects were fixed with stabilizing screws. The following fluorochrome labels were given intravenously to the beagle dogs: oxytetracycline 1week after the surgery, alizarin red 4 weeks after the surgery, calcein blue 8 weeks after the surgery. The tissue samples were obtained from the sacrificed dogs of 1, 4, 8, 12, 16 weeks after the surgery. Non-decalcified sections were prepared by resin embedding and microsection to find thickness of $10{\mu}m$ for the histologic examination and analysis. Results: 1. We could achieve the successful reconstruction of the horizontal bone defect by auto block bone graft. The grafted bone block remained stable morohologically after 16 weeks of the surgery. 2. In the histologic view. We observed osteoid tissue from the sample $4^{th}$ week sample and active capillary reconstruction in the grafted bone from the $12^{th}$ week sample. Healing procedures of auto bone grafts were compared to that of the host bone. 3. Bone mineralization could be detected from the $8^{th}$ week sample. 4. Fluorochrome labeling showed active bony changes and formation at the interface of the host bone and the block graft mainly. Bony activation in the grafted bone could be seen from the $4^{th}$ week samples. Conclusions: Active bone formation and remodeling between the grafted bone and host bone can be seen through the revascularization. After the perfect adhesion to host bone, Timing of successful implant installation can be detected through the ideal ridge formation by horizontal ridge augmentation.

• 한국표면공학회지
• /
• 제19권3호
• /
• pp.121-127
• /
• 1986

There are many plating methods already commercially employed in te surface technology. One of the plating methods is electroless (chemical) plating, which is deposited by auto-catalytic reduction of metallic ion with the reducing agent in the plating bath. And it has many advantages comparing with electrolytic plating in respect of properties of deposit, such as corrosion resistance, wear resistance, uniformity, hardness, adhesion and so on. So, electroless plating is the fatest growing process in metallization of plastic and electronic industry. The properties and numerous applications of electroless deposits are attracting more and more attention from finish specifies. Many metal finishers are considering set-up of new electroless line in their shops. This review will be beneficial to domestic metal finishers to understand the real status of present electroless plating technology. It will also provide some knowledge on the economic aspect of electroless plating for the commercial application of specific parts.

• Journal of Microbiology and Biotechnology
• /
• 제30권12호
• /
• pp.1854-1861
• /
• 2020

Staphylococcus aureus is one of the most common microorganisms and causes foodborne diseases. In particular, biofilm-forming S. aureus is more resistant to antimicrobial agents and sanitizing treatments than planktonic cells. Therefore, this study aimed to investigate the anti-biofilm effects of cell-free supernatant (CFS) of Saccharomyces cerevisiae isolated from cucumber jangajji compared to grapefruit seed extract (GSE). CFS and GSE inhibited and degraded S. aureus biofilms. The adhesion ability, auto-aggregation, and exopolysaccharide production of CFS-treated S. aureus, compared to those of the control, were significantly decreased. Moreover, biofilm-related gene expression was altered upon CFS treatment. Scanning electron microscopy images confirmed that CFS exerted anti-biofilm effects against S. aureus. Therefore, these results suggest that S. cerevisiae CFS has anti-biofilm potential against S. aureus strains.