• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.191-191
• /
• 2010

As many researchers want to predict or assess more about wind condition and wind power generation, CFD(Computational Fluid Dynamics) analysis method is very good way to do predict or assess wind condition and power generation. But CFD analysis is needed much knowledge of aerodynamics and physical fluid theory. In this paper, Auto-Wind CFD analysis program will be introduced. User does not need specific knowledge of CFD or fluid theory. This program just needs topographical data and wind data for initial condition. Then all of process is running automatically without any order of user. And this program gives for user to select and set initial condition for advanced solving CFD. At the last procedure of solving, Auto-Wind program shows analysis of topography and wind condition of target area. Moreover, Auto-Wind can predict wind power generation with calculation in the program. This Auto-Wind analysis program will be good tool for many wind power researchers in real field.

• 한국광학회지
• /
• 제10권5호
• /
• pp.405-412
• /
• 1999

SSF 알고리즘의 고정된 구간을 개선하여 자동으로 구간을 선택함으로 계산시간을 줄인 Auto Z-step과, SSF 알고리즘에 사용되는 FFT 방법의 표본값을 자동적으로 줄여서 계산시간을 감소시킨 Auto T-step 알고리즘을 제안하였다. 2.5Gbps 100km 전송시 이 두 알고리즘을 사용한 것은 기존의 1km fixed step 알고리즘보다 1/120의 계산시간이 줄었고, 10Gbps 40km 전송시 최대 1/56으로 줄었으며, 오차는 모두-30㏈ 이하였다. eye diagram으로 kkm fixed step 알고리즘과 비교할 때 오차가 무시될 수 있음을 알 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권8호
• /
• pp.2450-2463
• /
• 2024

Many legacy information systems are currently being clouded. This is due to the advantage of being able to respond flexibly to the changes in user needs and system environment while reducing the initial investment cost of IT infrastructure such as servers and storage. The infrastructure of the information system migrated to the cloud is being integrated through the API connections, while being subdivided by using MSA (Micro Service Architecture) internally. DBMS (Database Management System) is also becoming larger after cloud migration. Scale calculation in most layers of the application architecture can be measured and calculated from auto-scaling perspective, but the method of hardware scale calculation for DBMS has not been established as standardized methodology. If there is an error in hardware scale calculation of DBMS, problems such as poor performance of the information system or excessive auto-scaling may occur. In addition, evaluating hardware size is more crucial because it also affects the financial cost of the migration. CPU is the factor that has the greatest influence on hardware scale calculation of DBMS. Therefore, this paper aims to calculate the conversion factor for CPU scale calculation that will facilitate the cloud migration between heterogeneous DBMS. In order to do that, we utilize the concept and definition of hardware capacity planning and scale calculation in the on-premise information system. The methods to calculate the conversion factor using TPC-H tests are proposed and verified. In the future, further research and testing should be conducted on the size of the segmented CPU and more heterogeneous DBMS to demonstrate the effectiveness of the proposed test model.

• 소성∙가공
• /
• 제9권6호
• /
• pp.574-581
• /
• 2000

A vertically-walled auto-body part is one of the most difficult stamping parts because of angle change, wall curl, and twisting of the blank after springback as well as fracture and wrinkle. In this study, computational simulations of the vertically-walled auto-body part are carried out focusing on angle change, wall curl, and twisting after springback. Binderwrap blank shape is used in forming analysis for precise initial contacts between punch and blank. An adaptive mesh method is used in springback analysis for precise calculation of bending moments. In springback analysis, the differences of 2 and 3 dimensional analysis are compared and the effects of blank holdig force and friction coefficient are evaluated. In order to verify the validity of simulation results, they are compared with measured ones. The predicted thickness distribution and formed shape are agreed well with those of the measurement. The Predicted springback amount is less than that of the measurement.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.150-158
• /
• 2010

We had experienced the several system failures which were concerned about zero sequence voltages at the tertiary side of 345[kV] transformers. In this paper, we had considered the zero sequence voltage and its reduction methods at the 345[kV] auto-transformer tertiary. For analysis, we used EMTP(Electro-Magnetic Transients Program). The calculation results by EMTP were compared with the measured data of the field tests. From the calculation and the field tests, we had verified that it is due to pre-saturation characteristics of the potential transformer. So, we had improved its saturation characteristics and applied it at real site. After improvements, we could reduce the zero sequence voltage below the setting level of the relay.

• 대한의용생체공학회:의공학회지
• /
• 제12권3호
• /
• pp.185-190
• /
• 1991

An automatized latency calculation method of an e-OAE(evoked otacoustic emission) is proposed. The e-OAE signal measured from a normal adult is averaged 1000 times to remove noises. This averaged signal is converted to digital signal and that is processed by IBM-AT computer for latency calculation. we separate the stimulated and the emitted signal on the time domain by a modified LPC (linear prediction coding) spectrum, and the latency is calculated by cross-correlation method. By proposed latency calculation method the latency is 7.9[ms] for normal adult. The performance of the proposed method is also compared with that of the auto-correlation and cross performance of the proposed method is also compared with that of the auto-correlation and cross-correlation method. The result show that the proposed method has same precision with the conventional methods and can automatically calculate latency without subjective observation.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.497-510
• /
• 2017

A framed structure may be composed of two sub-structures, which are linked by a hinged joint. One sub-structure is the primary system and the other is the secondary system. The primary system, which is subjected to the periodic external load, can give rise to an auto-parametric resonance of the second system. Considering the geometric-stiffness effect produced by the axially internal force, the element equation of motion is derived by the extended Hamilton's principle. The element equations are then assembled into the global non-homogeneous Mathieu-Hill equations. The Newmark's method is introduced to solve the time-history responses of the non-homogeneous Mathieu-Hill equations. The energy-growth exponent/coefficient (EGE/EGC) and a finite-time Lyapunov exponent (FLE) are proposed for determining the auto-parametric instability boundaries of the structural system. The auto-parametric instabilities are numerically analyzed for the two frames. The influence of relative stiffness between the primary and secondary systems on the auto-parametric instability boundaries is investigated. A phenomenon of the "auto-parametric internal resonance" (the auto-parametric resonance of the second system induced by a normal resonance of the primary system) is predicted through the two numerical examples. The risk of auto-parametric internal resonance is emphasized. An auto-parametric resonance experiment of a ${\Gamma}$-shaped frame is conducted for verifying the theoretical predictions and present calculation method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.730-733
• /
• 2001

A computer aided design system for spur, helical, bevel and worm gears by using AutoCAD system and its AutoLISP computer language was newly developed in this study. Two methods are available for a designer to draw a gear. The first method needs the gear design parameters such as pressure, module, number of tooth, shaft angle, velocity, materials, etc. When the gear design parameters are inputted, a gear is drawn in AutoCAD system and maximum allowable power and shaft diameter are calculated additionally. The second method calculates all dimensions and gear design parameters to draw a gear when the information such as transmission, reduction ratio, rpm, materials and pressure are inputted. The system includes four programs. Each program is composed of a data input module, a database module, a strength calculation module, a drawing module, a text module and a drawing edit module. In conclusion, the CAD system would be widely used in companies to find the geometric data and manufacturing course.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.152-159
• /
• 2001

In multibody dynamic analysis including contact and impact, there are two major analysis methods, i.e., piecewise analysis and continuous analysis. Modeling of contact phenomena is mainly classified with a Kelvin-Voigt model or a model of Hertz contact model. In this paper, a contact module fur AutoDyn7 program was developed and implemented. Both the Kelvin-Voigt model and a model of Hertz contact law were developed. The process of this module is composed of contact distinction and the contact force calculation. Two examples were verified and compared to the commercial program DADS.

• 대한안전경영과학회지
• /
• 제16권2호
• /
• pp.131-138
• /
• 2014

Auto part industry supplies production for auto manufacturer and after market. These company have inventory for delivery. High inventory level can be good for delivery, but cost will be increase. Low inventory level can be customer unsatisfaction for delivery late. Low inventory level also is reason of low productivity by decreasing product batch size. These article suggest model for calculation a proper inventory level and prove a effect by simulation of some company.