• IE interfaces
• /
• v.21 no.1
• /
• pp.131-140
• /
• 2008

To shorten product development time and cost, integrated information managements of product, manufacturing process and resource are essential. In the area of material addressing, process engineers should make their decisions in the manner of collaborative engineering in order to reduce the manufacturing preparation time and cost in the product development and production. A digital virtual factory which is an united digital model of entire factory could be very useful for these areas. In this paper, the digital virtual factory is constructed and used for material addressing and analysis of an automotive general assembly shop. We developed the material addressing system for automotive general assembly shops using digital virtual factory models and nesting algorithms, and applied it to realistic problems of a Korean automotive company as an convenient and effective way of material addressing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1233-1238
• /
• 2010

The lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it basically needs the address which can be distinguished between the lighting terminals. The conventional method has to give the address of the lighting any methods like dip switch, EEROM and PROM. Then the lighting terminal can receive RGB data from DMX512 communication. According to electrical characteristics DMX512 protocol has to the splitter every 32 lighting terminals. If 512 lightings is all connected, maximum 16 splitters are needed. This paper is solved above weakness in DMX512 protocol using serial connection all lighting terminals. Also I developed the intelligent lighting terminal with auto-addressing. This was solved the inconvenience of the address assignment and the usage of the splitter. The developed products is applied and selled the semiconductor lighting terminals using ON-OFF control, dimming control, sequential control and rainbow control.

• ETRI Journal
• /
• v.30 no.5
• /
• pp.663-673
• /
• 2008

The multi-scenario topology of multi-channel hybrid ubiquitous sensor networks (USNs) is studied and a novel link auto-diversity cross-layer cooperative scheduling scheme is proposed in this paper. The proposed scheme integrates the attributes of the new performance evaluation link auto-diversity air-time metric and the topology space in the given multi-scenario. The proposed scheme is compared with other schemes, and its superiority is demonstrated through simulations. The simulation results show that relative energy consumption, link reception probability, and end-to-end blocking probability are improved. The addressing ratio of success with unchanged parameters and external information can be increased. The network can tolerate more hops to support reliable transportation when the proposed scheme is implemented. Moreover, the scheme can make the network stable. Therefore, the proposed scheme can enhance the average rate performance of the hybrid USN and stabilize the outage probability.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.21-38
• /
• 2024

Understanding the interrelationship between regional population dynamics and cultivated land is crucial for promoting regional economic vitality and enhancing food security. While prior research often addressed population migration and changes in crop area separately, this study employs a Panel Vector Auto Regression Model to examine the dynamic interaction between regional population shifts, changes in crop area, and the influx of foreign workers in agriculture. The results reveal a reciprocal relationship between population influx and crop area, indicating a negative impact on each other. Moreover, the analysis demonstrates that an expansion in crop area, particularly in field cultivation, significantly correlates with an increase in foreign workers. These findings underscore the mutual influence of labor shortages and diminished land availability in agriculture, with the influx of foreign workers potentially offering a positive impact on addressing structural challenges in rural areas.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.8
• /
• pp.1177-1183
• /
• 2019

Grapefruit seed extract (GSE) is a safe and effective preservative that is used widely in the food industry. However, there are few studies addressing the anti-biofilm effect of GSE. In this study, the anti-biofilm effect of GSE was investigated against biofilm-forming strains of Staphylococcus aureus and Escherichia coli. The GSE minimum inhibitory concentration (MIC) for S. aureus and E. coli were $25{\mu}g/ml$ and $250{\mu}g/ml$, respectively. To investigate biofilm inhibition and degradation effect, crystal violet assay and stainless steel were used. Biofilm formation rates of four strains (S. aureus 7, S. aureus 8, E. coli ATCC 25922, and E. coli O157:H4 FRIK 125) were 55.8%, 70.2%, 55.4%, and 20.6% at $1/2{\times}MIC$ of GSE, respectively. The degradation effect of GSE on biofilms attached to stainless steel coupons was observed (${\geq}1$ log CFU/coupon) after exposure to concentrations above the MIC for all strains and $1/2{\times}MIC$ for S. aureus 7. In addition, the specific mechanisms of this anti-biofilm effect were investigated by evaluating hydrophobicity, auto-aggregation, exopolysaccharide (EPS) production rate, and motility. Significant changes in EPS production rate and motility were observed in both S. aureus and E. coli in the presence of GSE, while changes in hydrophobicity were observed only in E. coli. No relationship was seen between auto-aggregation and biofilm formation. Therefore, our results suggest that GSE might be used as an anti-biofilm agent that is effective against S. aureus and E. coli.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.33-44
• /
• 2023

Wind power is one of the most efficient and reliable energy sources in the transition to a low-carbon society. In particular, offshore wind power provides a high-quality and stable wind resource compared to onshore wind power while both present a higher installed capacity than other renewables. In this paper, we present our new program, the X-WIND program well suitable for the assessment of the substructure of offshore wind turbines. We have developed this program to increase the usability of analysis programs for offshore wind energy substructures by addressing the shortcomings of existing programs. Unlike the existing programs which cannot solely perform the substructure analyses or lack pre-post processors, our X-WIND program can complete the assessment analysis for the offshore wind turbines alone. The X-WIND program is embedded in AutoCAD so that both design and analysis are performed on a single platform. This also performs static and dynamic analysis for wind, wave, and current loads, essential for offshore wind power structures, and includes pre/post processors for designs, mesh developments, graph plotting, and code checking. With this expertise, our program enhances the usability of analysis programs for offshore wind energy substructures, promoting convenience and efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2392-2400
• /
• 2015

Zigbee, which was a representative standard technology for dealing low energy and mesh networks in large deployment area such as smart home, smart building, and massive sensor networks, has been developed and deployed for increasing communication area by using Ad hoc method. It has been originally developed based on IEEE 802.15.4 standard so every node needs 48bit unique address defined by IEEE. However, it is absolutely inefficient to assign an unique address to every communication node where it would be deployed through large-scale network area, e.g., smart lighting and massive sensor networks, because there could be variously multiple companies to deploy network infrastructure and they could have different policy to assign node ID. To prevent the problem, this paper proposes a method of dynamic PANID assignment in overall Personal Coordinators, and also proposes a method for addressing PANID conflict problem which could be derived from dynamic PANID assignment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.553-556
• /
• 2013

Currently green growth and energy saving are major issues and solution using low-power LED lighting devices are gaining popularity. There are a few standards to control these LED lighting equipment and DMX512 protocol is a typical communication control standard used. DMX512 lighting control protocol is one of standard protocols widely used in various fields which include mainly stage lighting and landscape lighting. But in DMX512 protocol, line is to be connected to a wired connection. Advantage of wired connection is stable data transfer operation but it adds complexity and certain constraints as well in wired connection. To solve this problem, wired connection can be replaced efficiently with a wireless connection but for wireless, problem of data loss and two way communications arises. In this paper, these problems of wireless communication for DMX512 have been addressed and solutions for two way communications and data loss problem have been proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.579-586
• /
• 2010

Due to the recent development of measuring technology and 3D programs, it has become possible to obtain various spatial data. This study utilizes the 2-dimensional data and 3-dimensional data extraction technology based on the existing empirical and statistical DB. The data obtained from geospatial data technology are integrated with civil engineering BIM to conduct the modeling of the topography of the target region and select the optimum location condition by using the cut and fill balance of the volume of earth. The target area is the land around Tamjin River, Jangheong-gun, Jeolla-do. The 3-dimensional topology linked with 3-dimensional mapping technology by using the orth-image and aerial LiDAR that uses aerial photo of the target area is visualized with Civil3D of AutoDesk. By using Civil3D program, the Thanks to the recent development of measuring technology and 3D programs, target area is analyzed through visualization and related data can be obtained for analysis. The method of using civil engineering BIM enables to obtain various and accurate information about the target area which is helpful for addressing the issues risen from the existing methodology. In this regard, it aims at searching for the alternatives and provides suggestions to utilize the information.

• Journal of Information Management
• /
• v.35 no.4
• /
• pp.1-16
• /
• 2004

In this paper, we outline the user interface problems that the text messaging users face to provide empirical basis for developing better improved mobile text messaging system. Our initial hypothesis was that the majority of the problems that the text messaging users face, namely, 1) difficulty in correctly understanding the intent of the incoming messages and 2) problem with frequently mis-addressing the recipient of the outgoing messages, can be accounted for by the poor usability of the text messaging user interface. Our analysis is based on the text message-based communication diaries, which were recorded for one week by each and every one of 75 college students, and survey taken from the same subjects. The data was collected in 2004. The students listed various difficulties including the limited message length, obscure input method, lack of mean to express emotional content, lack of receipt confirmation, lack of auto save feature when preparing messages to send, and lack of means to permanently save messages. Some of these problems were also identified in the previous studies. However, we were able to gather additional problems that the users face and also elicit potential solutions to remedy the problems. From these findings and analysis, we attempted to provide ways to improve the text messaging user interface.