• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.285-293
• /
• 2003

This paper explores an optimal design methodology for an auto lever using a genetic algorithm. Components of the auto lever have been designed sequentially in the industry, but this study presents a novel design method to determine the design parameters of components simultaneously. The genetic algorithm approach is described to decide a set of design parameters for auto lever. The authors have attempted to model the design problem with the objective of minimizing the angle variation of detent spring subject to constraints such as modulus of elasticity of steel, geometry of shift pipe, and stiffness of spring. This method gives the promising design alternative.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.133-136
• /
• 1997

This paper explores the optimal design methodology for auto lever using a genetic algorithm. Component of auto lever has been designed sequentially in the industry, but this study presents the novel design method to consider the design parameters of components simultaneously. The genetic algorithm approach is described to determine a set of design parameters for auto lever. The authors have attempted to model the design problem with the objective of minimizing the angle variation of detent spring subject to constraints such as modulus of elasticity of steel, geometry of shift pipe, and stiffness of spring. This method can give the better alternative.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.7-13
• /
• 2015

The production processes were reviewed through the injection analysis of the shift lever as a core component of an auto lever installed in the automatic transmission of cars. The injection analysis was carried out for the shift lever and rod among the components in a shift lever module. The shift lever and rod are designed for injection molding with the insertion of a tube, a pin cable plate, and a steel rod for securing the strength of the product. The charging time, failure of injection molding, weld line, air trap, and deformation were reviewed according to this insert. Analyses on various gate positions were carried out for reviewing the cultivation and deformation of fiber around major components, such as the generation section of manipulation feeling and assembly section, so that optimal gate conditions might be reviewed and reflected in the mold design. Finally, we plan to compare the analysis results with the production of trial products.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.925-928
• /
• 2002

It is well blown that the product development time in manufacturing industry is critical. A new methodology for a product design knowledge management is required to reduce design errors and to optimize a design process. In this paper, Process-Related design knowledge management and Document Template are introduced to provide a design process to prevent previous design errors and a solution for the desist errors. Also the Document Template is more convenient interface in integrating the design knowledge into a system.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 춘계학술발표논문집
• /
• pp.140-142
• /
• 2003

본 논문은 유전 알고리듬을 이용하여 오토 트랜스미션 레버의 최적 설계 방법론에 대한 연구이다. 현재 업계에서의 오토 트랜스미션 레버는 구성 부품들을 순서적으로 설계하고 있으나, 본 연구에서는 구성 부품들의 설계 파라미터들을 동시에 고려하여 설계할 수 있는 새로운 방법론을 제안한다. 유전 알고리듬 접근방법은 오토 트랜스미션 레버의 설계 파라미터들의 최적 설계 파라미터 집합을 결정하기 위해 적용된다. 본 연구에서는 오토 트랜스미션 레버의 구성 부품들로 구성된 제약조건하에 디덴트 스프링의 각의 변위를 최소화하는 목적함수를 가지는 설계 문제를 모델링하였고, 유전 알고리듬을 적용하여 최적 설계를 수행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.759-762
• /
• 2000

Rapid Prototyping (RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stacking, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain RP apparatus. The objective of this study is to develop and design a new RP process, Variable Lamination Manufacturing using expandable polystyrene foam sheet as part material (VLM-S), which can make up for the disadvantage of existing techniques, and to develop an apparatus to implement the process. In order to examine the possibility of practical utilization of the proposed VLM-S process for prototyping of a general three-dimensional shape, an auto-shift lever knob and a pyramid shape were fabricated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.763-766
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stackin, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain RP apparatus. The objective of this study is to develop software for automatic generation of unit shape part (USP) for a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material (VLM-S). In order to examine the applicability of the developed software to VLM-S, USP's of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.379-384
• /
• 2005

Research interest on flexible body dynamics, has been increased recently. The major application areas are the auto-mobile, train, and heavy machinery. This paper attempted the dynamic analysis for the variable-gauge wheelset with a flexible body, to better understand the dynamic characteristics of the variable-gauge wheelset. In order to achieve this goal, a 3D-Virtual Mock-up model was built. The tendency of the stress and deformation for the flexible lever was investigated through component mode synthesis, contact mechanics and flexible body dynamics. This study is a pioneering work for the development of Korean type variable-gauge wheelset.

• 항공우주시스템공학회지
• /
• 제3권3호
• /
• pp.32-38
• /
• 2009

An autothrottle module for small jet aircraft Fly-By-Wire system was developed. The autothrottle was designed to be composed of DC geared motor and electro-magnetic clutch that enables smooth manual/auto switching. A controller was designed for simple position control using ON/OFF control method with a commercial motor driver. The autothrottle developed was installed in the cockpit mockup and interfaced to the flight control computer for the HILS test. The performance test proved that the throttle lever follows well the command signal from the flight control computer.

• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.64-70
• /
• 2001

In all the Rapid Prototyping (RP) techniques, the computer-aided design (CAD) model of a three-dimensional part is sliced into horizontal layers of uniform, but not necessarily constant, thickness in the building direction. Each cross- sectional layer is successively deposited and, at the same time, bonded onto the previous layer. The stacked layers form a physical part of the model. The objective of this study is to develop a software for automatic generation of unit shape part(USP) for a new RP process, Variable Lamination Manufacturing using the linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S). In order to examine the applicability of the developed software to VLM-S, USPs of general three-dimensional shapes, such as an auto-shift lever knob and a pyramid shape were generated.