• Journal of Welding and Joining
• /
• 제9권2호
• /
• pp.11-19
• /
• 1991

1. 16bit 개인용 컴퓨터인 IBM-PC/AT수준에서 레이저 가공을 위한 임의의 도형을 입력하여 DXF File로 출력하고, External명령인 AutoCAM을 추가하여 AutoCAM의 실행이 가능하였으며 AutoCAM의 종료후에는 다시 AutoCAD로 작업이 가능하다. 2. 개발한 AutoCAM은 AutoCAD Ver 2.6i로부터 Release 10까지의 DXF File을 읽어 Graphic 출력이 가능하다. 3. 가공 경로를 NC프로그램이 임의로 선정가능하면서, 가장 능률적인 가공작업이 수행될 수 있 도록 연속 또는 최인접 도형요소를 자동 선정하고 이의 조건에 따른 Auto Mode의 NC프로그램 생성이 가능하다. 4. 생성된 NC프로그램을 레이저 가공기에 전송하여 가공실험을 실시한 결과, 생성된 NC 프로 그램은 거의 수정하지 않아도 작동이 가능한 정도의 만족할 만한 결과를 얻었으므로 실용화에 큰 문제가 없는 것으로 사료된다. 이상과 같이 레이저 가공을 위한 CAD/CAM시스템은 초심자등의 이용상의 편리를 위하여 대화식으로 하였으며 사용된 언어도 Quick BASIC으로 자체 개발하 였으므로 앞으로 이 분야의 연구 및 실용화를 위한 기초자료로 활용될 수 있을 것으로 사료된다.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.154-161
• /
• 1997

Because of the complexity of the flower design of roll forming process, in which the flat strip is progressively deformed by successive sets of profiled rolls, a computer-aided design system for the flower design has been developed. It is programmed in AutoLISP and DCL(Dialogue Control Language) of AutoCAD. It has been found that the system is helpful in saving the time and effort required to design the flower of the product to be roll-formed.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.137-142
• /
• 1999

The purpose of this study is to develope a CAD-based tool for rasterization of polygonal vector map in AutoCAD. To identity the layer property of polygonal entity with user-defined coordinates as topology, algorithm in processing entity data of selection set that intersected with scan line was used, and the layers were extracted sequentially by sorted intersecting points in data-list. In addition to the functions for querying and modifying topology, two options for mapping were set up to construct plan projection type and to change meshes' properties in existing DTM data. In case of plan projection type, user-defined cell size of 3DFACE mesh is available for more detailed edge, and topological draping on landform can be executed in case of referring DTM data as an AutoCAD's drawing. The concept of algorithm was simple and clear, but some unexpectable errors were found in detecting intersected coordinates that were AutoCAD's error, not the utility's. Also, the routines to check these errors were included in algorithmic processing. Developed utility named MESHMAP was written in entity data control functions of AutoLISP language and dialog control language(DCL) for the purpose of user-oriented interactive usage. MESHMAP was proved to be more effective in data handling and time comparing with GRIDMAP module in LANDCADD which has similar function.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.98-108
• /
• 1998

중앙 단면도 등의 선박의 초기 구조설계는 여러 가지 이유로 2차원으로 설계되어 다른 설계부서에 도면으로 전달되고 있다. 본 연구에서는 기능이 서로 다른 여러 가지 컴퓨터 시스템사이의 데이터 교환을 위한 예제로, AutoCAD로 작성된 2차원의 초기 구조 설계 데이터를 구조해석(FEM) 시스템이나 상세설계 시스템(AutoDef)등의 다른 시스템에서 사용할 수 있는 데이터를 생성해 보았다. 이를 위해 STEP 제품모델의 방법에 따라 데이터가 정의 되었으며 2D 형상이나 3D 와이어프레임, 솔리드 모델등 다양한 형상을 다룰 수 있는 복합다양체 모델링 형상 도구인 ACIS가 사용되었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.416-421
• /
• 2000

Today, manufacturing market is highly competitive due to more complex and variable products, shorter delivery lead times, intensified product development rate, customers's increasing concern about quality, durability, maintainability, safety and environmental performance. To survive this environment, development of the automated design system is needed using AutoCAD. This paper represents a computer aided design system for watergate by using AutoCAD R2000 system and its Visual LISP computer language. The developed system ultimately generates the design for water gate through AutoCAD.

• 한국정밀공학회지
• /
• 제8권1호
• /
• pp.105-115
• /
• 1991

This paper describes an integrated CAD and CAPP system for prismatic parts of injection mold which generates a complete process plan automatically from CAD data of a part without human intervention. This system employs Auto CAD as a CAD model and GS-CAPP as an automatic process planning system for injection mold. The proposed CAD/CAPP system consists of three modules such as CAD data conversion module, manufacturing feature recognition module, and CAD/CAPP interface module. CAD data conversion module transforms design data of AutoCAD into three dimensional part data. Manufacturing feature recognition module extracts specific manufacturing features of a part using feature recognition rule base. Each feature can be recognized by combining geometry, position and size of the feature. CAD/CAPP interface module links manufacturing feature codes and other head data to automatic process planning system. The CAD/CAPP system can improve the efficiency of process planning activities and reduce the time required for process planning. This system can provide a basis for the development of part feature based design by analyzing manufacturing features.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.660-664
• /
• 1997

본 논문은 사출금형 설계를 위한 전문가 시스템의 개발에 관한 연구이다. 설계자가 오토케드 (AutoCAD)환경에서 금형부품 및 몰드베이스를 3차원 형상으로 나타낼 수 있으며 필요한 설계 데이터를 추가할수 있는 프로그램 개발에 있다. 주 프로그램은 C++를 사용하여 구축하였으며,금형부품 치수 및 몰 드베이스를 데이터베이스화 하였다. 주 프로그램과 오토캐드와 인터페이스를 하여 오토캐드 환경에서 자 유롭게 사용할 수 있도록 하였다. Pull-down menu와 Dialog box를 이용하여 금형 설계자가 금형의 각 부 품을 자유롭게 선정할 수 있으며, 각 단계별 선정된 금형부품은 즉시 나타나 설계자가 바로 확인 할 수 있도록 하였다. 이젝터 핀의 위치 및 크기를 자동적으로 나타낼수 있으며, 선정된 금형 부품 및 몰드베이 스는 2차원이나 3차원으로 나타낼 수 있다. 각각의 3차원 부품을 독립적으로 나타낼 수 있어 NC프로그램과 인터페이스가 가능토록 하였다.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.173-181
• /
• 2006

In this paper, an integration framework of Geometric Constraint Solving Engine and AutoCAD is presented, and a dynamic geometric constraint system is introduced. According to inherent orientation features of geometric entities and various Object Snap results of AutoCAD, the' proposed system can automatically construct an under-constrained geometric constraint model during interactive drawing. And then the directed constraint graph in a geometric constraint model is realtime modified in order to produce an optimal constraint solving sequence. Due to the open object-oriented characteristics of AutoCAD, a set of user-defined entities including basic geometric elements and graphics constraint relations are defined through derivation. And the custom-made Object Reactor and Command Reactor are also constructed. Several powerful characteristics are achieved based on these user-defined entities and reactors, including synchronously processing geometric constraint information while saving and opening DWG files, visual constraint relations, and full adaptability to Undo/Redo operations. These characteristics of the proposed system can help the designers more easily manage geometric entities and constraint relations between them.

• 한국조경학회지
• /
• 제23권4호
• /
• pp.20-27
• /
• 1996

The main purpose of this research is to develop a program supporting landscape planting design on AutoCAD basis using AutoLISP and DCL language. Current CAD use in landscape architecture field is mainly focused on customizing plant symbols for supporting two dimensional drafting rather than three dimensional consideration. This program is composed of eight module a such as PLANT module for inserting plant symbols, LABEL module for labeling task, SIMULATION module for simulating plant growth and seasonal color variation, TABLE module for generating plant table automatically, BUILDING module, BLOCK module, UTILITY module for deleting, transforming, shading symbols and DB MANAGER module for manipulating data. Design automation ability using automatic object recognition technique in this program allows AutoCAD to be used as a design tool in addition to its main role as a drafting tool through supporting landscape designers to generate many alternatives in the early phase of design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.901-905
• /
• 1992

The manual procedure of drafting engineering design is fast becoming obsolete. One of the important areas in CAPP is to automate tolerance assignment which is encountered in mechanical part design. This paper presents an approach for automating tolerance assignment using CAD database and tolerancing database in CAD drawing. The system is consisted of four major functions feasture extraction, feaure inferencing, rule-based tolerance allocation, and automatic upating. Auto CAD R.II is employed as CAD system and a computer progran is developed by using Auto LISP on PC-386.