• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1028-1031
• /
• 1997

The SS (Semi-solid) diecasters usually cany out the SS d~ecastmg experiments before producing new products. At the SS diecasting stages, the runner-gate part is always repeatedly corrected, which leads to a lengthened processing time and increased processing cost. The SS diecasting die design should consider component system factors. such as runner, gate, biscuit, overflow and airvent. A large amount of experience is essential in manual assessment and if the design is defective, much time and a great deal of efforts will be wasted in the modification of the d~e. Thus human negligence should be minimized. In this study, die design system for SS diecasting process has been developed to present algonthm of die design, especially runner-gate system. In addition, specific rules and equations for runner-gate system have been presented to avoid too many trials and errors with expensive equipment. It is possible for engineers to be efficient die design of SS diecasting and it will result in reduction of expense and time to be required. And we developed CAD system for SS diecasting die design by AutoLISP language under AutoCAD using proposed algorithm and the database. In addition, we developed the vector analysis program for filling pattern of SS metals.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.136-136
• /
• 2011

최근, 수자원의 효율적 이용을 위하여 농업용수로를 파이프라인으로 시공하는 지구가 증가하는 추세에 있다. 한편으로는 간척지를 복합농업단지, 시설원예, 신재생에너지단지 등 다각적으로 이용하는 정책을 추진하고 있다. 이에 따라, 농업용수 공급시스템도 개수로에서 관수로로 설계하는 추세에 있다. 농업분야에서 관수로를 활용하기 시작한 것은 ‘80년대 중반부터이나 그간 관수로 설계기준의 부재, 시범사업의 실패 등으로 인하여 보급이 지연되어 왔다. 일반적으로 관수로 설계는 노선선정, 관조직 구성, 관경산정, 관망해석, 도면작성 등 일련의 과정을 거쳐야 완성된다. 이 설계과정에서 관경산정 및 관망해석은 고도의 설계 노하우가 없으면 활용이 어려운 설계기술이다. 이번에 개발한 관수로 설계지원시스템은 관수로 설계 전문가가 처리해야할 일련의 설계작업을 AUTO CAD상에서 일관성 있게 처리할 수 있도록 개발한 것이 특징이다. 관수로설계지원시스템은 수치지도상에서 등고선 좌표, 표고 등을 자동 추출하여 사업계획서 및 종단도를 작성할 수 있으며, 관망심볼을 이용하여 시스템상에서 관망조직을 구성할 수 있으며, 다양한 안에 대한 노선검토, 관경산정, 관망해석과 관두께, 매설심도 등 구조해석이 가능하다. 그리고, 농업용 관수로의 제수밸브 등 부대시설에 대한 표준도를 D/B로 작성하여 설계도 작성시 참고할 수 있도록 개발하였다. 관수로설계지원시스템은 매뉴얼대로 처리하면 관망해석에 대한 전문지식이 없어도 설계에 활용이 가능하다.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.170-176
• /
• 2016

Purpose: This study aimed to improve the method for determining the position of the center of gravity for agricultural tractors. Methods: The proposed method uses trigonometric functions and coordinate transformation. Data were measured according to the ISO 789-6 test procedures for the center of gravity of agricultural tractors. The height calculated using the proposed method was compared with that determined from an AutoCAD drawing. To find the center of gravity of the tractor, the algorithm for finding the intersection of the two lines was used. Results: The vertical height from the ground to the center of gravity is 682.06 mm. The vertical coordinates obtained from the calculation and the drawing were the same. Conclusions: The developed method uses trigonometric and polar coordinate transformation. The method was compared and verified with the AutoCAD drawing results. The results indicate that users can apply this developed method instead of the plotting method which is an inconvenient and time-consuming. Further, users can program Microsoft Excel to easily determine the vertical coordinate. In addition, researchers will propose this method to the ISO as a standard method for determining the center of gravity in accordance with ISO 789-6.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.405-413
• /
• 2002

A process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in AutoCAD. Shape of the product must be drawn with the solid line and the hidden line, and with the plane and front view, as well. At the plane, the system recognizes the external shape of non-axisymmetric portions - the number of the sides of the regular polygons and the radii of circles inscribing and circumscribing the polygon. At the front view, the system cognizes the diameter of axisymmetric portions and the height of the primitive geometries such as polygon, cylinder, cone, concave, convex, etc. The system perceives that the list developed from the solid line must be formed by the operation of forward extrusion or upsetting, and that the list developed from the hidden line must be formed by the operation of backward extrusion. The system designs the intermediate geometries again by considering clearance between workpiece and die, and then finally the billet diameter, in reverse order from the finished product, on the basis of volume constancy and using the operations, the forming sequence, the number of operations and the intermediate geometries which were already designed. The design rules and knowledges for the system were extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Suitability of the process planning was analyzed using SuperForge of FVM simulation package. The results of analysis showed good formability.

• Korean Journal of Human Ecology
• /
• v.21 no.3
• /
• pp.551-565
• /
• 2012

The primary goal of this study was to provide a systematic methodology of utilizing 3D technology for tight-fit performance sportswear using information of skin deformation in various posture. Technical tools used in this study are Cyberware whole body scanner, RapidForm2004, 2C-AN 3D pattern development program, and YukaCAD. Analysis of the 3D skin deformation while knee joint was bent from $0^{\circ}$ to $60^{\circ}$ revealed that the length of dermatomes L4 was remained consistent during knee bending. Therefore, L4 was chosen as a major cutting line. To develop a highly ergonomic pattern, replicas of static and dynamic postures were developed and integrated using two methods, one is morphing method (Sqirlz Morph), and the other is AutoCAD. Experimental tight-fit garments called 'Derm-Mov Pattern' was designed using dematomes L4, L2, and inner line under knee and compared with four other patterns. As results, AutoCAD was appropriate as a integrating method of various postures. In wear test, 'Derm-Mov Pattern' was rated high (p < .001), in terms of pressure comfort especially around front crotch area. However, wear sensation was not signipicantly different in other area due to highly extensible property of materials. Pressure distribution was relatively even in these experimental garments.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.22-32
• /
• 1998

This paper describes a research work of developing a computer-aided design of irregularly shaped-sheet metal product with bending and piercing operation for progressive working. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of five main modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking dimensions and the best utilization ratio of blank-layout within bending production feasibility area which is beyond ${\pm}30^{\circ}$ degrees intersecting angle between grain flow and bending edge line and which is suitable to progressive bending operation. Also the strip-layout drawing generated by a bending and a piercing operation according to punch profiles divided into automatically for external area of irregularly shaped-sheet metal product is displayed in graphic forms.

• The Research Journal of the Costume Culture
• /
• v.25 no.3
• /
• pp.270-284
• /
• 2017

This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.51-55
• /
• 2007

In this paper Statistical Energy Analysis has been considered to predict high frequency air borne interior noise. Dash panel Insulation is major part to reduce engine excitation noise. Transmission loss and absorption coefficient are considered to predict dash insulation performance. Transmission lose is derived from coupling loss factor and absorption coefficient is derived from internal damping loss factor. Material Biot properties were used to calculate each loss factors. Insulation geometry thickness distribution was hard to measure, so FeGate software was used to calculate thickness map from CAD drawing. Each predicted transmission losses between conventional insulation and light weight insulation were compared with SEA. Transmission loss measurement was performed to validate each prediction result, and it showed good correlation between prediction and measurement. Finally interior noise prediction was performed and result showed light weight insulation system can reduce 40% weight to keep similar performance with conventional insulation system, even though light weigh insulation system has lower sound transmission loss and higher absorption coefficient than conventional system.