• Wind and Structures
• /
• v.10 no.5
• /
• pp.401-420
• /
• 2007

Field measurements of the wind-induced response of two residential reinforced concrete buildings, among the tallest in the world, have been performed during two typhoons. Natural periods and damping values have been determined and compared with other field measurements and empirical predictors. Suitable and common empirical predictors of natural period and structural damping have been obtained that describe the trend of tall, reinforced concrete buildings whose structural vibrations have been measured in the collection of studies in Hong Kong compiled by the authors. This data is especially important as the amount of information known about the dynamic parameters of buildings of these heights is limited. Effects of the variation of the natural period and damping values on the alongwind response of a tall building for serviceability-level wind conditions have been profiled using the gust response factor approach. When using this approach on these two buildings, the often overestimated natural periods and structural damping values suggested by empirical predictors tended to offset each other. Gust response factors calculated using the natural periods and structural damping values measured in the field were smaller than if calculated using design-stage values.

• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.88-92
• /
• 2007

Purpose: Free nipple graft reduction mammaplasty is a simple and effective way to reduce huge breasts. However, this technique is frequently criticized for producing poor projection and hypopigmentation of the nipple areola complex(NAC). Methods: Sixty three patients(126 breasts) underwent the procedure from 1998 to 2005. Authors' method is similar with the modified Gradinger's technique except the keyhole pattern. After skin flap closing, the position of NAC is determined considering symmetry. The NAC is initially harvested and then resection of the breast followed, leaving a deepithelized inferior parenchymal pedicle($5{\times}5cm$). The upper point of inferior pedicle is sutured to the fascia of the pectoralis to produce the upper bulge. The nipple is replaced as a free and composite graft. Results: An average of 823grams of breast tissue per breast was removed. There was no major complications. All grafted nipples showed long lasting projection. And also, all NAC eventually regained their normal color except for 3 patients who needed medical tattoos. The overall results were good and patient satisfactory score was high. Conclusion: This useful technique greatly enhances long lasting projection and recovers nipple color.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.55-63
• /
• 1998

Among the position sensing methods available, the arc sensor which utilizes the electrical signal obtained from the welding arc itself is one of the most prevalently used methods, because it has an advantage that no particular sensing device is necessary and real-time sensing of a groove position is possible directly under the arc. The authors have already developed a seam tracking system that contains a new arc sensor algorithm, which uses the relative welding current variation according to the tip-to-workpiece distance in GMA welding. In this study a torch height control algorithm for automatic weld seam tracking was proposed for completing the previous system, which uses an on-off control technique. To implement the torch height control algorithm during weld seam tracking the system parameters which include 2nd averaging range, weighting factor for 2nd moving averaging, and Z-directional basic compensation distance were determined by experimental analysis. Finally the two different height control methods, one is simple on-off control and the other on-off control using a reference current value , were compared in their tracking abilities.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.61-66
• /
• 2005

A probabilistic approach for evaluating failure risk is suggested in this paper. Probabilistic fracture analyses were performed for a pressurized pipe of a Cr-Mo steel reflecting variation of material properties at high temperature. A crack was assumed to be located along the weld fusion line. Probability density functions of major variables were determined by statistical analyses of material creep and creep crack growth data measured by the previous experimental studies by authors. Distributions of these variables were implemented in Monte Carlo simulation of this study. As a fracture parameter for characterizing growth of a fusion line crack between two materials with different creep properties, $C_t$ normalized with $C^*$ was employed. And the elapsed time was also normalized with tT, Resultingly, failure probability as a function of operating time was evaluated fur various cases. Conventional deterministic life assessment result was turned out to be conservative compared with that of probabilistic result. Sensitivity analysis for each input variable was conducted to understand the most influencing variable to the analysis results. Internal pressure, creep crack growth coefficient and creep coefficient were more sensitive to failure probability than other variables.

• Korean Journal of Plant Taxonomy
• /
• v.48 no.4
• /
• pp.289-300
• /
• 2018

Coreanomecon is a monotypic and endemic genus in Korea, distributed mainly in the southern regions. Coreanomecon is morphologically similar to Hylomecon by producing red latex, easily distinguished from Chelidonium, which produces yellow latex. Coreanomecon were merged into Hylomecon or Chelidonium depending on the authors. To understand the phylogenetic relationship of Coreanomecon, DNA sequences of chloroplast rbcL and matK and nuclear Internal Transcribed Spacer (ITS) regions were determined from the species of Papaveroideae (Papaveraceae) in Korea and analyzed with the Maximum Parsimony and Bayesian methods. Phylogenetic analyses of Papaveroideae suggest that Coreanomecon is sister to the clade of Chelidonium and Stylophorum in the ITS data and that it is sister to Hylomecon in the chloroplast (cpDNA) data. A constraining analysis using the Shimodaira-Hasegawa test (S-H test) suggested that the ITS data do not reject the sister relationship of Coreanomecon and Hylomecon. The S-H test also suggested that the cpDNA data is compatible with the placement of Coreanomecon as a sister to the clade of Chelidonium and Stylophorum. Although the conflicting phylogenetic results may stem from insufficient phylogenetic signals, they may also be associated with hybridization between Hylomecon and an ancestor of Stylophorum and Chelidonium. The results of this study suggest that Coreanomecon is a distinct lineage as an endemic genus, supporting the morphological data.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.4
• /
• pp.3-13
• /
• 2018

Load bearing capacity of dowel type fasteners loaded perpendicular to the shear plane is determined based on Johansen's yield theory (Johansen, 1949). In case of inclined screws whose axis is no longer perpendicular, the ultimate load of connection increases because of additional axial withdrawal capacity. To calculate load bearing capacity for inclined screws, KBC2016 and Eurocode5 provide design equations using the combination of two effects; axial and bending strength. Although their equations have been validated for a long time, there is still minimal information how to apply them for concrete-CLT joints. Since there are not many test data available, engineers have to make certain assumptions and thus results may look inconsistent in practice. In this paper, authors would like to describe the current approach and assumptions indicated by KBC2016 and Eurocode 5 and how they match the experimental results in terms of shear strength of CLT-concrete connections. To fulfill the objective, several push-out tests were performed on nine different test specimens. Each specimen has different penetration angles and depths. By analyzing load-displacement curves, the maximum shear strength, stiffness, and ductility were obtained. Shear strength values were compared with the current design codes and theoretical equations proposed in this paper. Observations on stiffness and ductility were briefly discussed.

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.361-368
• /
• 2020

The authors developed a new type of steel slit shear wall (SSSW) having the function of structural condition assessment through visually inspecting the out-of-plane deformation of the designed tapered links subjected to lateral deformation. To facilitate its practical application, this paper studies how to design dimensions of the tapered links. Two parameters, the width-to-thickness ratio of the tapered links and steel yield stress, were studied. The performance of structural condition assessment was affected by both parameters with the width-to-thickness ratio being the controlling one. Through both numerical and experimental study, the designed width-to-thickness ratio of tapered links for different levels of structural condition assessment was established considering the effect of different steel grades used. In practice, the dimensions of tapered links can be determined following the design equation provided. Finally, a design procedure for the proposed SSSW system is provided.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.49-58
• /
• 2021

Globalization of higher education deepens the competition in the global educational services market. Competition between higher education institutions is based on the use of a wide range of activities and tools that are constantly evolving and becoming more complex. Digitalization significantly transforms the approaches to competition between universities in educational, research and marketing activities. Digital technologies are becoming an integral part of this competition. In addition, in the current conditions of globalization of the scientific and educational space, numerous rankings of universities have become an important tool of the competition; the most significant rankings of universities are as follows: Academic Ranking of World Universities (China), Times Higher Education Rankings of Universities (Great Britain), Webometrics (Spain). In the article, the key principles of the formation of world rankings of universities are analyzed, the main sources of information resources for their compilation are determined. The authors have concluded that the improvement of the position of educational institutions in the world rankings of universities should be implemented within the framework of the state educational policy. The key positive effects of universities due to increasing the competitiveness level of the national higher education system are specified.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.8
• /
• pp.157-167
• /
• 2022

The global laundry detergents market in 2021 was valued at nearly $121 billion, with consumers being reported as heightening their search for hygienic products capable of fighting viruses. Therefore, the researchers undertook a study to determine how product innovation (PI), product quality (PQ), and product attitude (PA) effects Thai consumers' satisfaction (CS) with their purchase of laundry detergent and fabric softener. After the questionnaire's validity and reliability confirmation, the authors used multi-stage random sampling by region and province in January and February 2022 to collect 520 questionnaires. LISREL 9.10 was used in the CFA and SEM analysis of the six hypotheses, which were determined to be supported. The results showed that all three causal variables positively influenced CS, with a total effect (TE) R² value = 87%. Also, latent variable total effect (TE) values showed that PI was strongest (0.93), then PQ (0.56), and finally, PA (0.54). Therefore, consumer satisfaction is essential in a firm's ongoing development and sustainability in a highly competitive, globalized world. Organizations must develop competitive strategies that adjust to consumer needs. Management must monitor online and social media sources where product reviews are given and adjust their strategies accordingly.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.368-372
• /
• 2021

The article identifies the features of the digital culture of modern society in the dynamics of its impact on the education sector, identifies the main directions of digitalization education, an objective analysis is presented, the possibilities of examination as a scientific assessment are determined "Digital reforms" of education, the role of traditional values of educational culture in expertise and improvement digital innovations in the education system, identified the main contradictions in the development of digital culture, to determine the directions of its improvement. The article describes the three main components of information technology as a complex of hardware, software and a system of organizational and methodological support; the description of analog and digital information technologies is presented. The authors list the most common multifunctional office applications and IT tools; the advantages of using IT in the educational process are highlighted.