• 제목/요약/키워드: Authors determined

검색결과 320건 처리시간 0.033초

An Investigation into Research Productivity in the Journal of Consumer Behavior

  • Shin, Dong-Jin;Huh, Mooyul
    • 유통과학연구
    • /
    • 제13권2호
    • /
    • pp.45-53
    • /
    • 2015
  • Purpose - This study strives to discern trends in research productivity in the Journal of Consumer Behavior. It will identify prolific authors and institutions in articles over ten years (2004-2013). Research design, data, and methodology - The Journal of Consumer Behavior was chosen and articles over ten years were analyzed. Research productivity was determined by categorizing the data into four themes: number of authors per article, author affiliated institutions, a list of prolific authors over a ten-year period, and author-affiliated countries. Results - Authors have a propensity to collaborate on a research paper, yielding a high frequency of articles with two or three authors in a single publication. In addition, author and institution productivity was highest in North America and Europe. Conclusions - The research productivity of the Journal of Consumer Behavior is unprecedented. The trends and insights from this study will allow academics in the area of consumer behavior to observe leading authors and institutions. Moreover, speculations about the leading countries and institutions, not to mention top prolific authors in consumer behavior, will be elucidated in this study.

한국산 주혈류의 염색체에 관한 연구(2) (Studies on the Chromosomes of Orthotera in Korea (2))

  • 강영선;손홍철
    • 한국동물학회지
    • /
    • 제2권2호
    • /
    • pp.15-24
    • /
    • 1959
  • Concluding the result of this observation, authors obtained the table showing chromosome numbers which are consisted in each species as follow. Viewing on this result, authors recognized Acrididae are determined the sex with X-O type. 6 species of Family Acrididae and one species of Family Gryllotalpidae (on above table) had already calculated the number of chromosomes by some foreign observers. But another one species (Briodema tuberculatum dilatum STOLL) clarified by authors firstly in this observation. In 2nd spermatocyte of Trilophidia annulata YHUMBERG 1 to 3 Ist constriction satellites were observed, and each of the small bodies was connected with thin fibre and constituted with same or less breadth as the main chromosomes. If those are not the satellites, they should be the super-numerary chromosomes appearing a dot form. In this observation, among 48 species of Family Acrididae which have been found in Korea 18 species were calculated their chromosome numbers which were including 1 species calculated by authors newly. And authors have reobserved the chromosomes of Gryllotalpa africana PALISOT de BEUVOIS of Family Gryllotalpidae which was done by Japanese before.

  • PDF

Impact of Artificial Intelligence on the Development of Art Projects: Opportunities and Limitations

  • Zheng, Xiang;Xiong, Jinghao;Cao, Xiaoming;Nazarov, Y.V.
    • International Journal of Computer Science & Network Security
    • /
    • 제22권9호
    • /
    • pp.343-347
    • /
    • 2022
  • To date, the use of artificial intelligence has already brought certain results in such areas of art as poetry, painting, and music. The development of AI and its application in the creative process opens up new perspectives, expanding the capabilities of authors and attracting a new audience. The purpose of the article is to analyze the essential, artistic, and technological limitations of AI art. The article discusses the methods of attracting AI to artistic practices, carried out a comparative analysis of the methods of using AI in visual art and in the process of writing music, identified typical features in the creative interaction of the author of a work of art with AI. The basic principles of working with AI have been determined based on the analysis of ways of using AI in visual art and music. The importance of neurobiology mechanisms in the course of working with AI has been determined. The authors conclude that art remains an area in which AI still cannot replace humans, but AI contributes to the further formation of methods for modifying and rethinking the data obtained into innovative art projects.

급지 장치에서의 미끄러짐 현상에 대한 연구 (A Study on Slipping Phenomenon in a Media Transport System)

  • 유재관;이순걸;임성수;김시은
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.681-685
    • /
    • 2004
  • A media-feeding (or media-transport) system is a key component in daily consumer systems such as printers, copiers and ATM's. The role of the media-transport system is to feed a medium, which is usually in the form of a thin film, to the main process in a uniform and repeatable manner. Even small slippage between the media and the feeding rollers could significantly degrade the performance of the entire system. The slippage between the medium and the feeding rollers is determined by many parameters which include the friction coefficient between the feeding rollers and the medium material, the angular velocity of the feeding rollers, and the normal force applied by feeding rollers on the medium. This paper investigates the effect of the normal force and the angular velocity of feeding rollers on the slippage of the medium. Authors have constructed a test bed for experiments, which consists of a feeding module and various measuring devices. Using regular paper as media being fed, the authors experimentally measured the slippage of the medium under various normal forces and angular velocities of driving feeding roller. Also the authors developed a novel two-dimensional simulation model for the media-transport system. The paper medium is modeled as a set of multiple rigid bodies interconnected by revolute joints and rotational springs and dampers. Simulations were executed using a multi-body dynamic analysis tool called RecurDy $n^{ⓡ}$. The slippage obtained by the simulation is compared to experimental results.ults.

  • PDF

디이젤기관 추진축계 설계를 위한 전산프로그램 개발에 관한 연구 (Developing a Computer Program for the Design of Marine Diesel Engine Shafting)

  • 김영만;전효중
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제8권1호
    • /
    • pp.37-48
    • /
    • 1984
  • For the designing propulsion shafting of ship, shaft diameters are usually calculated according to the Society's rules and other scantlings such as a shaft length, coupling and taper parts, etc., are decided according to calculated diameters. And then, the torsional vibration, the lateral vibration and shaft alignment should be reviewed to check whether the resonance points of torsional or lateral vibration appear within the normal operating speed range and the shaft alignment is reasonable. If the results of calculations are unsatisfactory, this process should be repeated until the final condition is determined and the process of this work takes much time to carry out. To simplify the above tedious processes, authors have developed a computer program to fulfill the above design processes at once. This program takes aim at reducing the manual calculating work associated with the propulsion shafting of ship. To confirm the availability of developed computer program, several propulsion shaftings which are driven by diesel engines, have been analysed. The results calculated by authors developed computer program show comparatively good agreements with those of the actual propulsion shafting.

  • PDF

배치설계를 고려한 다단 기어장치 설계 시스템 개발 (Development of a Design System for Multi-Stage Gear Drives Considering Configuration Design)

  • 정태형;김지철;배인호
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
    • /
    • pp.398-403
    • /
    • 2000
  • The design of multi-stage gear drives is a time-consuming process that includes additional design problems, which are not considered in the design of single-stage gear drives. In the previous research works, the authors have proposed a new algorithm to design multi-stage gear drives at the preliminary design phase. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. In the configuration design process, the positions of gears and shafts are determined by minimizing the geometrical volume (size) of a gearbox. However, various types of spatial constraints should be satisfied in practical design situation. To locate input and output shaft in specified positions is the typical example of such problems. In this paper, the authors show the formulations of spatial constraints applied to the design of four-stage gear drives. The design solution shows considerably good results, and the design system is confirmed to be readily applicable to practical design situation.

  • PDF

Muscling My Way to My Positive Future: Physical Exertion of Strength and Preference for Risk

  • Cho, Eunice Kim;Ahn, Hee-Kyung
    • Asia Marketing Journal
    • /
    • 제22권1호
    • /
    • pp.27-39
    • /
    • 2020
  • Building on the growing literature on how physical bodily expressions influence psychological processes, the authors propose that exerting physical strength decreases risk perceptions and increases preference for risky options by increasing perceptions of control or agency. The present research is based on the belief of "no pain, no gain", that when an individual exerts physical strength and effort, he believes he can be the agent in bringing about the desired outcome. Because of this automatic association between exerting physical strength and the sense of being in control of the outcome, the authors hypothesize that even in situations where the outcome is determined by chance and luck, individuals exerting effort feel they have more control and thus choose riskier, but more desirable, options. Furthermore, this research clarifies the distinction between physical exertion of strength, high- and low-power poses, and psychological power.

논문의 주저자 결정에 미치는 영향 (Effect of The First Authors Determine to Paper)

  • 성정민;박용덕
    • 치위생과학회지
    • /
    • 제11권2호
    • /
    • pp.129-134
    • /
    • 2011
  • 본 연구는 2010년 9월부터 2010년 12월까지 치위생학 교육자 171명을 대상으로 연구윤리의 내용 중 저자순서 및 저자범위 결정에 대한 인식과 경험을 조사하고 다음과 같은 결론을 얻었다. 1. 본인연구의 저자 결정자가 누구냐는 질문에 55.6%의 과반수 이상이 '지도교수'라고 응답했으며, 저자결정의 경험도에서 내 연구에 참여하지 않았음에도 다른 사람을 공저자로 등재시킨 경험이 있느냐는 질문에 68.4%가 '그렇다'라고 가장 높게 응답했다. 2. 저자의 범위 및 순서결정 인식의 4점 척도 조사결과, '결과해석이나 중요한 정보를 기여한 사람이 제 1저자가 되는 것은 아니다' $2.81{\pm}.485$로 가장 높게 나타났으며, '초벌 번역을 한 사람에게는 공동저자의 자격이 있다'에 대해서는 $2.60{\pm}.538$로 가장 낮게 조사 되었다. 3. 인구사회학적 특성과 저자자격 인식의 연관성 중 통계적으로 가장 유의하게 나온 항목은 주저자로서의 논문편수였으며, 이 중 주저자로서의 9-14편의 논문을 갖고 있는 응답자에서 '데이터를 모으고 기록하며 문헌을 살피는 일을 도운 학생은 저자자격이 있다'와 '초벌 번역을 한 사람에게는 공동저자의 자격이 있다' 에서 각각 $2.89{\pm}.315$, $2.79{\pm}.419$로 가장 높게 조사돼 통계적으로 유의한 차이를 보였다(p<0.05). 4. 저자자격 인식간의 관련 변인간의 상관관계를 분석한 결과, 모두 정의 상관관계로 나타났으며, 이 중 '데이터를 모으고 기록하며 문헌을 살피는 일을 도운 학생도 저자자격이 있다'와 '초벌번역을 한 사람에게는 공동저자의 자격이 있다'가 가장 높은 상관관계(r=.433)로 조사돼 통계적으로 유의한 차이를 보였다(p<0.01). 결론적으로 연구자간의 갈등을 줄이기 위해서는 저자결정에 대한 기준을 설정하고 이를 교육하는 것이 시급할 것으로 사료된다. 또한 그 과정에서 당사자들의 논의가 중요하고 이러한 논의와 합의 과정을 통해 연구자간의 갈등이 생기지 않도록 하는 것이 최선의 방법이라고 판단된다.

인간 - 기계시스템의 평가모델 (II) (A Model for Man-Machine System Evaluation (II))

  • 이상도;하정진;정중희;이동춘
    • 산업경영시스템학회지
    • /
    • 제9권13호
    • /
    • pp.17-22
    • /
    • 1986
  • Man-machine system is an integrated total system which is linked by functions of man and machine, and the value of the system is determined by its compatability. And it is able to evaluate the system value on the aspects of utility, availability, and cost benefit. The authors previously represented the methodology of system utility using transfer functions, and this paper successively discusses the reliability of man-machine system. The reliability estimation and evaluation methodologies are briefly mentioned, and some examples are shown in this paper.

  • PDF

액체 할로겐의 구조에 관하여 (The Significant Structures of Liquid Halogens)

  • 박형석;장세헌
    • 대한화학회지
    • /
    • 제7권2호
    • /
    • pp.179-181
    • /
    • 1963
  • The partition function of liquid halogens is developed applying the significant liquid structure theory proposed by H. Eyring and co-workers. The parameters in the partition function are determined by triple point technique which was proposed by the authors in the previous paper, and also the thermodynamic properties and the surface tension are calculated by the method therein.

  • PDF