• 한국진공학회지
• /
• 제17권4호
• /
• pp.311-316
• /
• 2008

저에너지(수 eV) 양전자 빔을 이용하여 도체나 반도체의 표면/계면의 물리화학적 특성 분석에 독특한 유용성이 보고 되고 있다. 기존의 표면 분석법에 비해 표면의 선택도가 향상되어 반도체 소자의 박막 두께가 얇아지는 최신기술에 적합한 분석법으로 주목을 받고 있다. 물질표면에 조사된 저에너지 양전자는 표면 근처의 image potential에 포획이 되어 표면에 있는 전자들과 쌍소멸하며 Auger 전자를 방출한다. 표면으로부터 방출된 Auger 전자의 에너지를 측정함으로 원자의 화학적 구별이 가능하므로 검출기의 에너지 분해도가 중요하다. 기존의 ExB 형태의 에너지 측정기는 분해도가 $6{\sim}10\;eV$ 정도이고 특정한 에너지 영역만을 일정시간 스캔하여 스펙트럼을 측정하므로 측정시간이 길어진다는 단점이 있다. 반면에 Time-Of-Flight(TOF) 시스템은 방출되는 전자들의 에너지를 동시에 검출하므로 측정시간이 단축되어 측정 효율이 향상된다. 에너지 분해도를 높이기 위해서는 측정하고자 하는 전자의 진행거리를 길게 할수록 좋으나, 공간적 제약을 고려한 reflected TOF 시스템과 retarding tube을 이용한 linear TOF 시스템의 에너지 분해도를 이론적으로 시뮬레이션하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.403-403
• /
• 2008

This article reports changes in the mechanical properties of chromium steel after nitrogen implantation at high temperature. The samples are implanted with 120keV N-ion at doses ranging from $1\times1080$ to $4\times1080ions/cm^2$ and at substrate temperature ranging from 25 to $400^{\circ}C$. Nano-hardness and AES(Auger electrons spectroscopy) were measured from nitrogen ion implanted layer. The sliding wear and impact wear properties of the implanted samples were also measured. The results revealed that the hardness and mechanical properties of ion implanted samples depend strongly on the ion doses and implantation temperature. The hardness of the nitrogen implanted sample with 120keV, $4\times10^{18}ions/cm^2$, $335^{\circ}C$ was measured to be approximately 20 GPa, which is approximately 5 times higher than that of un-implanted sample (H=3.8 GPa). Also, the sliding wear and impact wear properties of nitrogen implanted samples were greatly improved. Detailed experiment results will be presented.

• Journal of Korean Vacuum Science & Technology
• /
• 제4권1호
• /
• pp.27-32
• /
• 2000

We have studied the carrier relaxation of InAs/GaAs modulation-doped quantum dots depending on the excitation wavelength and modulation-doping concentration by using the time-ressolved spectroscopy. At the excitation below GaAs barrier band gap, the relaxation processes become very slow, implying to observe the phonon bottleneck effects. On the other hand, at the excitation far above GaAs band gap, phonon bottleneck effects are broken down due to Auger processes. Increasing modulation-doping concentration, the relaxation times, by virtue of Coulomb scattering between electrons in GaAs doped layer and carriers in InAs quantum dots, are observed to become fast.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1751-1755
• /
• 2007

The interaction of ammonium hydroxide (NH4OH) with zircaloy-4 (Zry-4) was investigated using X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) methods. In order to study the surface chemistry of NH4OH/Zry-4 system, the binding energies of N1s, O1s and Zr3d electrons were monitored. The N1s peak intensity was remarkably increased by following cycles of Ar+ sputtering of NH4OH dosed Zry-4 surface at room temperature. Because the nitrogen stayed under the subsurface region was diffused out onto the Zry-4 surface after oxygen concentration was decreased. These could be occurred after the surface oxygen was diffused into the bulk or desorbed out from the surface until Ar+ fluence was 6.0 × 1016 Ar+/cm2 then the surface was relatively atomic deficient state. The O1s peak intensity was decreased by stepwise Ar+ sputtering. After many cycles of Ar+ sputtering, the peak intensities of Zr3d peaks did not change much but the shape of the peak clearly did change. This implies that the oxidation state of zirconium was changed during stepwise Ar+ sputtering of NH4OH/Zry-4. The Zr3d peak intensity of zirconium nitride (ZrNx) increased as the intensity of N1s (from zirconium nitride) increased but the Zr3d peak intensity of zirconium oxide (ZrOx) decreased due to the depopulation of the oxygen species on the surface region. We also observed that the peak intensity of Zr4+ was nearly same after Ar+ sputtering processes but the peak intensity of metallic zirconium increased compared to that of before the sputtering process was performed.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.7-12
• /
• 1995

When a $Ta_O_5$ dielectric film is deposited on a bare silicon, the growth of $SiO_2$ at the $Ta_O_5$/Si interface cannot be avoided. Even though the $SiO_2$ layer is ultrathin (a few nm), it has great effects on the electrical properties of the capacitor. The concentration depth profiles of the ultrathin interfacial $SiO_2$ and $SiO_2/Si_3N_4$ layers were obtained using an Auger electron spectroscopy (AES) equipped with a cylindrical mirror analyzer (CMA). These AES depth profiles were quantitatively analyzed by comparing with the theoretical depth profiles which were obtained by considering the inelastic mean free path of Auger electrons and the angular acceptance function of CMA. The direct measurement of the interfacial layer thicknesses by using a high resolution cross-sectional TEM confirmed the accuracy of the AES depth analysis. The $SiO_2/Si_3N_4$ double layers, which were not distinguishable from each other under the TEM observation, could be effectively analyzed by the AES depth profiling technique.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.358-358
• /
• 2012

The application of BZO (Boron-doped Zinc Oxide) films use as the TCO(Transparent Conductive Oxide) material for display and solar cell industries, where the conductivity of the BZO films plays a critical role for improvement of cell performance. Thin BZO films are deposited on glass substrates by using RF sputter system. Then charging flow rates of O2 gas from zero to 10 sccm, thereby controlling the impurity concentration of BZO. BZO deposited on soda lime glass and RF power was 300 W, frequency was 13.56 MHz, and working pressure was $5.0{\times}10-6$ Torr. The Substrate and glass between distance 200 mm. We measured resistivity, conductivity, mobility by hall measurement system. Optical properties measured by photo voltaic device analysis system. We measured surface build according to oxygen flow rate from XPS (X-ray Photoelectron Spectroscopy) system. The profile of the energy distribution of the electrons emitted from BZO films by the Auger neutralization is measured and rescaled so that Auger self-convolution arises, revealing the detail structure of the valence band. It may be observed coefficient ${\gamma}$ of the secondary electron emission from BZO by using ${\gamma}$-FIB (Gamma-Focused Ion Beam) system. We observed the change in electrical conductivity by correlation of the valence band structure. Therefore one of the key issues in BZO films may be the valence band that detail structure dominates performance of solar cell devices. Demonstrating the secondary electron emission by the Auger neutralization of ions is useful for the determination of the characteristics of BZO films for solar cell and display developments.

• 한국수소및신에너지학회논문집
• /
• 제10권2호
• /
• pp.119-130
• /
• 1999

$Mg_2Ni_{1-x}{^{57}}Fe_x$(x=0.015, 0.03, 0.06, 0.12 and 0.24)합금을 제작하여 $M{\ddot{o}}ssbauer$ 공명에 의한 연구를 하였다. x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum은 2개의 doublet(doublet 1, 2)을, x=0.06 합금의 spectrum은 2개의 doublet(doublet 1, 2)과 1개의 six-line을, 그리고 x=0.12, 0.24 합금의 spectrum은 six-line만 보인다. x=0.015, 0,03, 0.06 합금의 doublet 1은, 초 상자성 거동을 보여주는 과잉으로 존재하는 일부의 철 때문에 생기는 것으로 판단된다. doublet 2는, $Mg_2Ni$ 상의 Ni에 치환된 철에 기인한 것으로 판단된다. doublet 2의 isomer shift 크기 (0,24 ~ 0.28 mm/s)로 보아 $Fe^{+3}$로 존재함을 추측할 수 있다. 또한 doublet 2의 quadrapole splitting이 영이 아님으로부터 Fe 주위의 전자 배열이 비대칭을 이루고 있음을 알 수 있고, 그 크기 (1.20 ~ 1.38 mm/s)는 산화수 +3의 quadrapole splitting 값에 아주 가까운 값이다. 자기적 초미세 상호 작용을 보여주는 six-line은 합금 속에 들어가지 않는 철 때문에 생긴다. 수소화물화 반웅시킨 x=0.015, 0.03 합금의 $M{\ddot{o}}ssbauer$ spectrum이 six-line을 보였는데, 이로부터 수소화물화 반응으로 인하여 Fe이 편석되었음을 알 수 있다. 수소화물화 반응후 $M{\ddot{o}}ssbauer$ spectrum, 자기장의 함수로서 자화의 변화 측정, Auger electron spectroscopy, electron diffraction pattern 분석 결과, Ni의 편석과 MgO의 형성을 보여주었는데, 이는 수소 속에 들어 있는 미량의 산소가 $Mg_2Ni$와 반응하여 야기된 현상으로 생각된다.