• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1735-1743
• /
• 2018

Excitons are the most prominent features of the optical properties of monolayer transition-metal dichalcogenides(TMDC). In view of optoelectronics it is very important to understand the decay mechanisms of the excitons of these materials. Auger recombination of excitons are regarded as one of the dominant decay processes. In this paper the Auger constant of recombination is computed based on the approach proposed by Kavoulakis and Baym. We obtain both temperature dependent (from type A, A' processes) and temperature independent (from type B, B' processes) contributions, and a numerical estimate of theoretical result yields the value of constant in the order of $10^{-2}cm^2s^{-1}$, being consistent with existing experimental data. This implies that Auger decay processes severely limit the photoluminescence yield of TMDC-based optoelectronic devices.

• 한국환경복원기술학회지
• /
• 제19권6호
• /
• pp.77-86
• /
• 2016

Due to aging of the rural and mountain populations the labor force is reduced. However work intensity continues to increase, thus, there is a need to improve the current effectiveness of forest operations. This study compared and analyzed the Operation productivity and efficiency of planting containerized seedlings using a battery-powered planting auger and a mattock. Growth was also investigated by looking into the initial growth increments in the planted seedlings. Tasks were investigated by analyzing the process and operation time needed to plant 1 containerized seedling using a planting auger and a mattock. The time spent on the various elements of the planting process was measured with a stopwatch but observations were done continuously. Result of the study shows that with the use of a lightweight planting auger the average time spent to plant a containerized seedling is 18.61 seconds while with the use of a mattock it took an average of 26.96 seconds which clearly demonstrates that the planting auger is more efficient in terms of working hours. Working intensity was also analyzed with the use of a portable heart rate monitor (Polar V800). The average increase in heart rate and work intensity index were analyzed for one planting cycle. It was observed that when using the lightweight planting auger, there was a 46.51% increase in the average heart rate while a 74.67% increase in heart rate when the mattock was used which shows that there is a significant increase in heart rate when mattock is used. In addition, work intensity index was observed to be 29.95% and 47.83% when the planting auger and mattock were used respectively. With the continuous use, work intensity index is significantly higher with the use of the mattock as compared to that of the lightweight planting auger. There were no significant differences on the growth increment of seedlings planted using the different tools until a year after planting, however differences in growth increment were observed after a year. A difference of 15.1 cm in height and 3.41 mm in diameter was observed which shows that the use of lightweight planting auger is excellent for planting containerized seedlings.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.311-316
• /
• 2008

저에너지(수 eV) 양전자 빔을 이용하여 도체나 반도체의 표면/계면의 물리화학적 특성 분석에 독특한 유용성이 보고 되고 있다. 기존의 표면 분석법에 비해 표면의 선택도가 향상되어 반도체 소자의 박막 두께가 얇아지는 최신기술에 적합한 분석법으로 주목을 받고 있다. 물질표면에 조사된 저에너지 양전자는 표면 근처의 image potential에 포획이 되어 표면에 있는 전자들과 쌍소멸하며 Auger 전자를 방출한다. 표면으로부터 방출된 Auger 전자의 에너지를 측정함으로 원자의 화학적 구별이 가능하므로 검출기의 에너지 분해도가 중요하다. 기존의 ExB 형태의 에너지 측정기는 분해도가 $6{\sim}10\;eV$ 정도이고 특정한 에너지 영역만을 일정시간 스캔하여 스펙트럼을 측정하므로 측정시간이 길어진다는 단점이 있다. 반면에 Time-Of-Flight(TOF) 시스템은 방출되는 전자들의 에너지를 동시에 검출하므로 측정시간이 단축되어 측정 효율이 향상된다. 에너지 분해도를 높이기 위해서는 측정하고자 하는 전자의 진행거리를 길게 할수록 좋으나, 공간적 제약을 고려한 reflected TOF 시스템과 retarding tube을 이용한 linear TOF 시스템의 에너지 분해도를 이론적으로 시뮬레이션하였다.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.77-82
• /
• 2010

This study evaluated the characteristics and reliability of an auger crane with a built-in hydraulic extender. The field test of the hydraulic extender was performed with the hydraulic lines filled with hydraulic fluid and free of air. The pressure generated during the test was measured with a digital pressure gauge. The crane was considered to have undergone one cycle of the excavation process after it had performed excavation under three conditions at the same location. This process was performed three times in total. From the results of the excavation using the hydraulic extender, it was found that the maximum pressure and torque measured were 19.9 [MPa] and 895.4 [$kgf{\cdot}m$], respectively. The rotation force of the auger crane generated at this time signifies a horizontal force. If the excavation diameter of the auger crane is increased, the rotation speed is reduced causing the circumferential speed to also be reduced. The torsional shear stress of the extendable auger crane was calculated to be approximately 23.5 [MPa]. However, the rotation shaft material used for this system was carbon steel for machine structural use (SM45C). Since the minimum torsional yield stress is greater than 150 [MPa] according to KS D 3752, it means the equipment has secured a safety factor greater than 6. Therefore, it was found that when performing work using the extendable auger crane, it exhibited no problems with the safety and reliability of its shaft.

• 유기물자원화
• /
• 제16권4호
• /
• pp.57-63
• /
• 2008

본 연구에서는 돈분을 이용한 열분해공정(pyrolysis)에 의한 바이오오일의 특성을 분석하여 보고하였다. 기본적으로 bio-oil 생산을 위한 pilot auger형 반응기는 $400^{\circ}C{\sim}600^{\circ}C$의 고온을 유지하였다. 바이오오일의 특성은 수질분석, 열량가, 원소분석, GC/MS를 이용한 마이오일의 원소, $^1H$ NMR분광기에 의한 functional group 구명 등을 포함한다. 돈분시료를 이용한 바이오오일 생산량은 pilot auger 반응기의 온도가 $550^{\circ}C$일 때 바이오일 생산율은 질량의 21%로서 최대를 나타내었다. 이 결과는 본 연구에서 연속 auger형 반응기의 이송이 편리하고 bio-oil 생산량이 적지 않아 대체 축분처리기술의 하나로 검토할 수 있음을 보였다. 그러나 auger 반응기의 원료로의 열전도가 유동상 반응조보다 낮아서 향후 이를 개선하기 위한 연구가 성공적으로 수행되면 바이오오일 생산량을 제고시킬 수 있을 것으로 판단된다.

• 한국농공학회지
• /
• 제6권1호
• /
• pp.706-714
• /
• 1964

• 대한방사선기술학회지:방사선기술과학
• /
• 제9권1호
• /
• pp.45-49
• /
• 1986

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.80-85
• /
• 2024

Numerical values of the Auger coefficient and the free carrier absorption (FCA) coefficient are extracted by applying deep neural networks (DNNs) to the L-I characteristics of 850 nm GaAs/AlGaAs laser diodes. Two elemental DNNs are used to extract each coefficient sequentially. The fidelity of the extracted values is established through meticulous correlation of L-I characteristics bridging the realms of simulations and measurements. The methodology presented in this paper offers a way to accurately extract the Auger and FCA coefficients, which were traditionally treated as fitting parameters. It is anticipated that this approach will be applicable to other types of opto-electronic devices as well.

• 한국산림과학회지
• /
• 제106권4호
• /
• pp.465-472
• /
• 2017

본 연구는 경북대학교에서 개발한 경량식혈기와 일반적인 용기묘 식재 방법인 괭이를 이용하여 경상북도 상주시 화동면 이소리에 2015년 4월 소나무 용기묘(2-0)를 정방형 식재방법($1.8{\times}1.8m$)으로 식재기구별 각각 225본씩 식재하여 약 2년 동안의 초기생장, 생존율 및 묘목품질지수(SQI)를 조사 분석하였다. 분석결과, 경량식혈기와 괭이를 이용하여 식재한 용기묘의 평균 근원경(mm)은 각각 2015년에 3.77과 3.94, 2016년에 18.73과 15.32 2017년에 27.8과 23.9로 나타났다. 또한 용기묘의 평균 간장(cm)은 각각 2015년에 33.4와 33.4, 2016년에 89.8과 74.7, 2017년에 120.7과 97.9로 간장 역시 경량식혈기를 이용하여 식재한 용기묘가 괭이를 이용하여 식재한 용기묘 보다 초기 생장이 더 높은 것으로 나타났으며, 생존율 또한 경량식혈기를 이용한 용기묘의 생존율이 괭이를 이용한 경우 보다 약 10%정도 더 높게 나타났다. 그리고 H/D율(건전도)과 T/R율은 서로 유사한 값을 나타낸 반면 SQI는 경량식혈기가 0.60, 괭이는 0.24로 나타나 경량식혈기 식재가 괭이 식재에 비해 용기묘의 초기생장에 더 유리한 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1427-1435
• /
• 2002

The main aim of the present article is numerically to investigate the micro-scale heat transfer phenomena in a silicon microstructure irradiated by picosecond-to-femtosecond ultra-short laser pulses. Carrier-lattice non-equilibrium phenomena are simulated with a self-consistent numerical model based on Boltzmann transport theory to obtain the spatial and temporal evolutions of the lattice temperature, the carrier number density and its temperature. Especially, an equilibration time, after which carrier and lattice are in equilibrium, is newly introduced to quantify the time duration of non-equilibrium state. Significant increase in carrier temperature is observed for a few picosecond pulse laser, while the lattice temperature rise is relatively small with decreasing laser pulse width. It is also found that the laser fluence significantly affects the N 3 decaying rate of Auger recombination, the carrier temperature exhibits two peaks as a function of time due to Auger heating as well as direct laser heating of the carriers, and finally both laser fluence and pulse width play an important role in controlling the duration time of non-equilibrium between carrier and lattice.