• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.985-988
• /
• 2001

A piezo-buzzer being used for the purpose of generation of audible frequency, which is a electric-acoustic transducer utilizing the inverse piezoelectric effect. Also it can be used for a pressure sensor according to the piezoelectric effect. But the output of a piezo-buzzer is a differential signal. In this study, we've made a system that can measure a real pressure by integration of output signal. According to our results, it could be found a possibility of application for pressure sensor by measurement of output characteristics when a piezo-buzzer was pressurized and depressurized, and by measuring of an error by means of the drift current of OP-Amp, etc..

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.748-750
• /
• 1999

In this study, a speech enhancement is presented based on the utilization of well-known auditory mechanism, noise masking. The speech enhancement approach adopted here is to derive an modifier that achieves audible noise suppression. This modification selectively affects the perceptually significant spectral values, and is therefore less prone to introduction of unwanted distortions than methods that affect the complete STSA and produces more enhanced results at low SNR as well as at high SNR. The speech enhancement method adopted here needs exact estimation of the minimum specteal value per critical band because it uses only the minimum spectral value per critical band. For this, the method adopted here uses the modified spectral subtraction that is more flexible than power spectral subtraction. So, the result in experiment represented better SNR than before.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.153-158
• /
• 2004

The security system using optical fiber is a system, circulating infrared rays laser pulse on the optical fiber which is attached on the security fence to prevent invasion, which can show invasion position with visible and audible signal on the situation monitor if an invader cut or pull the security fence with minuteness of 10m. The optical fiber can be also applied for the bed structure stability monitoring system of high speed train as well as security system. To apply this system for high speed railroad bed structures, this system will give an alarm if it detect excessive tension, shrinkage, deflection which is beyond the limit of structure, that will prevent serious railroad accident. In this paper, we like to propose that applying this system for security and structure stability can improve confidence and stability on operation of railways

• Journal of Chest Surgery
• /
• v.11 no.1
• /
• pp.92-96
• /
• 1978

Congenital diaphragmatic eventration is a rare disease and generally accepted as an abnormally high position of part or all of the diaphragm, usually associated with a marked decrease in muscle fibers and a membranous appearance of the abnormal area. There were 4 cases of the congenital diaphragmatic eventration at the Dept. of Thoracic Surgery, Seoul National University Hospital, from 1957 to 1977. They were two boys and two girls and ranging from 1 day to 3 years of age. They were all repaired by surgical operation and one was expired postoperatively, another one was dead one year later due to complication. The ratio between right and left was 1:3 and their symptoms were cyanosis, dyspnea and frequent respiratory disease. In physical examination there was noted decreased breathing sound on the affected lung field and bowel sound was audible in some cases. Diagnosis was done by Chest X-ray and plication of the affected diaphragm was usually done in operation. There were noted atelectasis and cystic change of the affected side lung. And the liver, colon, spleen and small intestine were found in the dome of the eventrated diaphragm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1384-1387
• /
• 1996

SCPI(Standard Commands for Programmable Instrument) is a standard command sets designed for controlling various types of instruments. In order to control FFT(Fast Fourier Transform) analyzing device using SCPI it is required to support sweep measurement function. We defined SCPI command set for FFT analysis and developed parser of defined command set using lex(Lexical Analyzer Generator) and yacc(Yet Another Compiler Compiler). After developing FFT analyzing test was performed with that parser. Up to audible signal frequency the result of FFT analysis was accurate and that result was agree with that of conventional FFT analyzer. As a result it is proved that various types of instruments including sweep measurement instrument can be controlled with appropriate SCPI command sets. Also when developing new instruments the method used in this experiment will contribute to reducing the time required to develop the SCPI parser and increasing reliability.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.2
• /
• pp.16-22
• /
• 1973

It is described about radiation monitor which can be used for rapidly checking the contamination caused by gamma and beta radiation. and for constantly monitoring such a probable hazardous area. In the circuits used in this device, a detailed analysis on the pulse amplifier and the design formulae of the discriminator circuit is presented. The device is all transistorized and the counting rates are audible through speaker besides being read by meter to the extent of maximum 10 k pps.

• Speech Sciences
• /
• v.7 no.2
• /
• pp.177-189
• /
• 2000

This paper investigates how individual speakers' speech can be distinguished using acoustic parameters such as amplitude, pitch, and formant frequencies. Word samples from fifteen male speakers in their 20's in three different regions were recorded in two different modes (i.e., casual and clear speech) in quiet settings, and were analyzed with a Praat macro scrip. In order to determine individual speakers' acoustical values, the total duration of voicing segments was measured in five different timepoints. Results showed that a high correlation coefficient between $F_1\;and\;F_2$ in formant frequency was found among the speakers although there was little correlation coefficient between amplitude and pitch. Statistical grouping shows that individual speakers' voices were not reflected in regional dialects for both casual and clear speech. In addition, the difference of maximum and minimum in amplitude was about 10 dB which indicates a perceptually audible degree. These acoustic data can give some meaningful guidelines for implementing algorithms of speaker identification and speaker verification.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.333-334
• /
• 1989

Electrically active part of the piezoelectric sound element is a ceramic thin circular disk cemented to a metal base plate (using a type of thermosetting epoxy). The active part is a thin lead zirconate titanate disk (PZT). The piezoelectric sound element is so dimensioned that its basic resonance frequency is approximately if the center of the audible frequency band: This frequency is mainly determined by the geometry and the sort of the metal base plate materials. In this study, four kinds of PZT ceramic and two classes of thin metal base plate were prepared. It is observed that dielectric and pizoelectric properties relate to acoustical properties (particularly sound pressure level).

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.12
• /
• pp.1022-1032
• /
• 1989

King Sejong's Striking Clepsydra was an elaborate timekeeping and annunciating system incorporating biological automata capable of annunciating hours, intervals and night-watches based on Shou-shih calindrical systems automatically. In this paper the author has studied the original manuscripts on the Striking Clepsydra [Sejong sillock, 65: 1a-3b ff` 16th year, 7th month(1434)] from the technical point of view undertaking a close analysis of this monumental clock and aiming to our modern understanding of the full degree of delicate mechanisms and sophisticated controls built into the night-watch and division announcing clockwork(jackwork). Based on the input/output model, timekeeping, ball-rack, ball-relay, and audible time-indicating mechanisms were synthesized reconstructing night-watch annunciating systems. It revealed that the night-watch and division announcing processes were entirely renewed automatically. Historical and philological data concerning the improvements of the proposed model were discussed.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.338-340
• /
• 2001

Power factor improved for single-phase buck-converter is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.