• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.74-77
• /
• 2006

Thin $AuO_x$ layer was formed by $O_2$ plasma treatment on Au electrode. The surface work function of plasma treatment showed higher by 0.5 eV than that of bare Au, reducing the hole injection barrier at the Au/pentacene interface. Using $O_2$ plasma-treated Au source-drain electrodes, the field-effect mobility of bottom-contact pentacene-OTFT was increased from 0.05 to 0.1 $cm^2/Vs$.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1468-1470
• /
• 1998

Using a solution of polyamic acid salt obtained in combination with polyimide acid, we successfully prepared thermally stable multilayers(41, 35, 31 layers) films disilane-containing polyimide by Langmuir-Blodgett(LB) technique. We studied the electrically phenomena occurring at the metal(Au)/polyimide(Pl) LB film/metal(Au). Also, we then examined the of Pl LB films by means of current-voltage (I-V) and resistance measurement.

• Journal of Sensor Science and Technology
• /
• v.15 no.5
• /
• pp.352-356
• /
• 2006

In this paper, we developed enzyme electrode of a new form to improve performance of disposable glucose sensor. We could fabricate electrode of Cu/Ni/Au structure which has very low electrical resistance (0.1 $\Omega$) by sticking copper film to plastic film with laminating method and electro-plated nickle and gold on it. The enzyme electrode was completed by immobilizing enzyme on the fabricated electrode. The fabricated glucose sensor has very quick sensing time as 3 seconds, and excellent reproducibility, fabrication yield as well.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.92-94
• /
• 2001

We investigated quench recovery characteristics of Au/YBCO thin film meander lines. YB$a_{2}$$Cu_{3}$ $O_{7}$films were coated in-situ with a gold layer and patterned into 2 mm wide meander lines by photolithography. The limiters were tested with simulated fault currents at various source voltages. Resistance decreased first slowly and then rapidly to zero. Resistance vs. time curves for different source voltages fell on top of each other when translated horizontally. The slowly varying portion of data fell on straight lines of a slope on a semi-log scale at all source voltages. A heat balance equation reflecting heat loss from meander lines to surroundings explains these results quantitatively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.196-200
• /
• 2004

Using polyimide Langmuir-Blodgett(LB) films as a tunneling harrier, we fabricated Au/Polyimide/1-layer arachidic acid/Pb structure in order to investigate electron transport properties through a junction. It was found that 9-layer polyimide LB films function as a good tunneling harrier in a study of current-voltage(I-V) chararteristics. And several peaks originating in the vibrational modes of the constituent molecules of 1-layer arachidic acid LB films were clearly observed in d$^2$V/dI$^2$- V corves.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.491-494
• /
• 1999

We have examined the electrical properties of arachidic acid Langmuir (L) films by using a displacement current measuring technique with pressure stimulation. We give pressure stimulation into organic thin films and detect the Induced displacement current. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers are 17, 19 and 21. Also, we then examined of the MIM device by means of I-V The I-V characteristic of the device is measured from 0 to +1[V]. The insulation property of a thin film is better as the distance between electrodes is larger.

• Progress in Superconductivity and Cryogenics
• /
• v.12 no.3
• /
• pp.7-11
• /
• 2010

For many large-scale applications of high-temperature superconducting materials, large critical current density($J_c$) in high applied magnetic fields are required. A number of methods have been reported to introduce artificial pinning centers(APCs) in $YBa_2Cu_3O_{7-\delta}$(YBCO) films for enhancement of their $J_c$. In this work, we investigated electric characteristic of YBCO films on $SrTiO_3$ (100) substrates whose surfaces were modified by the introduction of Au nanoparticles (AuNPs). Au nanoparticles were uniformly dispersed on STO substrates with one of typical solution techniques, self assembled monolayer. After heating the STO substrates with Au nanoparticles, the size of Au nanoparticles was around 29~32 nm in height and 41~49 nm in diameter. XRD diffraction patterns taken on the YBCO film with Au nanoparticles show the c-axis orientation. The measured $T_c$ of YBCO /AuNPs films was around 89K and the $J_c$ was 0.75 MA/$cm^2$ at 65 K and 1 T.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.233.2-233
• /
• 2003

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.97-100
• /
• 2004

In the present work exchange coupling between ultrathin Fe ($8{\AA}$) and Tb ($12{\AA}$) layers separated by Au spacer of varied thickness ($3-20{\AA}$) was studied. Anomalous Hall effect measurements showed weakly damped oscillating dependence of the Hall conductivity as a function of Au spacer thickness. Disagreement of the observed damping with the RKKY model of interlayer exchange coupling was explained by the influence of external magnetic field on the behaviour of exchange coupling oscillations. It was confirmed by Hall-like effect measurements at zero applied magnetic field and also illustrated by corresponding estimations.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.