• 한국건설관리학회논문집
• /
• 제16권3호
• /
• pp.143-151
• /
• 2015

콘크리트 구조물에 발생하는 균열은 구조물의 내력, 내구성, 방수성 등 모든 기능을 저하시키는 주요한 원인으로, 그 대책의 필요성은 구조물이 존재하는 한 계속될 것이다. 하지만 콘크리트 구조물에서의 균열은 재료와 시공 및 사용환경, 구조적 요인 등 다양한 변수가 복합적으로 작용하고 있어 이에 대한 대책 마련과 사전 예방이 쉽지 않은 것이 현실이다. 이에 본 연구에서는 공동주택 외벽에서 균열이 발생한 사례를 분석하여 이에 대한 데이터베이스를 구축하고, 발생한 균열과 부재의 속성간의 관계를 상관관계를 도출하고자 한다. 이는 각 부재가 가지는 기본적 속성이 유사함을 고려하여 균열과 부재의 관계를 분석하고 부재의 속성을 검토하여 균열에 대한 대책 마련에 일조하고자 함이다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제28권3호
• /
• pp.1-11
• /
• 2023

Permeable reactive barrier (PRB) is a prominent in-situ remedial option for cleanup of contaminated groundwater and has been gaining increasing popularity in recent years. Funnel-and-gate systems, comprised of two side wings of impermeable walls and a central gate wall, are frequently implemented in many sites, but often suffers from bypassing of groundwater due to the progressive clogging of the gate wall over extended period of time. This study investigated technical feasibility of a hybrid funnel-and-gate system designed to address the flow deterioration in the gate wall. The key attribute of the proposed hybrid system is the operation of drainage units at the barrier walls and rear end of the gate wall. A conceptual modeling with MODFLOW indicated the groundwater inside the barrier was maintained at appropriate level to be guided toward the gate wall, yielding constant discharging of groundwater from the gate.

• Architectural research
• /
• 제13권3호
• /
• pp.3-10
• /
• 2011

The Characteristics of space are determined by several factors; however, the element that determines the physical characteristic of floors, walls, and ceiling is the structure. This study constructs a wall to analyze the direct effect that the layout of an exhibition wall has on the element of the wall followed by the structural process and visibility of descriptive analysis and examples of art museums that the shift from a perceptional wall to an experiential wall affected circulation. For elements and formation methods of the wall, first, it is made up of open and closed type exhibition spaces, and it can give abundance in qualitative space rather than a quantitative aspect. Secondly, the directivity of space changes according to the development of the visible axis, thus, directly affects the change in visibility. Thirdly, the difference between spatial structure and visual structure is the difference between the visual axis and spatial structure. The wall formation type followed by the combination method, the simple visible structure, which is the type that possesses the simple combination (Room, Zone, Cluster), repeatedly uses the same size of units of space that is orderly and has few spatial axes and the classification of simple type and simple cluster type, which has few visible axes, also exists. Also, with the complex structure of the maze type it displays the reiterated form of the cluster, which is the space with disorderly combination and has much visible axes and spatial axes. Also, these can be divided into three types: 1) Maze Cluster Type, 2) Cross Road Type, and 3) Open Flexible Type. These wall types lead the various changes in circulation, and even each of the arrangement qualities of the exhibitions should be researched according to its exhibition place type.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.532-537
• /
• 2007

A series of wet grinding experiments have been carried out using a stirred ball mill to systematically investigate consideration of grinding characteristics. The particle size distribution and median diameter of the grinding consumption power for a given grinding time were considered. Also, the effect of grinding aids on particle size and grinding consumption energy defined as the summation of grinding power was investigated. The grinding aids had influence on the smaller products size and decrease grinding consumption energy because the function of grinding aids were to be attribute to the prevention of agglomeration and ball and grinding chamber wall coating of sample powder. The grinding process seemed to be controlled by the force of agglomeration of the ground products. It was demonstrated that the particle size and grinding consumption energy could be more decreased by the addition of grinding aids.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.620-623
• /
• 2003

Non-linear behaviors of multilayer piezoelectric ceramic actuator (MCA) were investigated under electrical and mechanical stress. DC 100 V bias was applied to the MCA to obtain displacement. Laser vibrometer, which using Doppler effect, was employed to characterize displacement caused by $d_{33}$ mode of MCA. To understand this non-linear behavior of MCA, displacement was measured and compared under different load states. By increasing load, electric field-induced strain and piezoelectric constant($d_{33}$) of MCA was decreased. We attribute this phenomenon to the domain wall motion and depoling of MCA under heavy load.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.147-152
• /
• 2004

With the life style changing and the income level improving in our society, the composition of apartment residents and the preference are diversifying. For that reason, various residential plans are desired. However in bearing wall system the existing apartments have a clear attribute of a fixed system, consequently, they have a difficulty in being adapted to the social requirement. In this research, 1 would like to put a variable apartment to practical use in which with a suitable structure system applied to a variable apartment considered as remodeling system various residential requirements are accepted and the change of the family life cycle and moreover, effective and systematic remodeling are accomplished.

• 한국조경학회지
• /
• 제51권2호
• /
• pp.103-119
• /
• 2023

BIM(건설정보모델링)을 건설사업 전반에 적용하려는 정부정책 이후 업계는 이를 적극적으로 도입, 활용하려는 동향을 보이고 있다. BIM 도입은 모델 객체들을 표준에 맞춰 라이브러리로 구축하여 반복 사용함으로써 업무량을 줄이고 데이터의 정합성과 호환성, 일관된 품질을 확보함으로써 촉진될 수 있다. 이에 국내 건축과 토목분야, 해외 조경분야에서는 이미 상당수의 BIM 라이브러리 표준화 연구를 수행하고 이를 토대로 지침을 마련하였다. 현재 국내 조경분야에서도 BIM에 관한 기초연구 및 도입을 시도하고 있으나 산업현장 적용에 어려움이 많아 확산이 지연되고 있다. 이는 표준화된 라이브러리 사용으로 BIM 설계업무의 효율성을 향상시킴으로써 개선될 수 있으므로 본 연구는 이에 대한 논의의 시발점을 마련함과 동시에 조경실무에서 라이브러리를 제작할 때 참고할 수 있는 객체의 기준을 제시하고자 하였다. 조경 BIM 라이브러리 표준화는 객체분류와 속성정보 도출이라는 두 가지 측면에서 모색되었다. 먼저 국내 건설정보분류체계, 물품분류체계, 조경설계기준, 조경공사표준시방서, 그리고 노르웨이 조경가협회의 BIM 객체분류체계를 참고로 객체분류를 시도하였다. 그 결과 조경객체는 조경식재, 조경시설물, 조경구조물, 조경포장재, 관수 및 배수시설의 5개 대분류하에 교목, 관목, 지피초화류, 옥외시설물, 옥외조명시설, 계단 및 경사로, 옥외벽체, 옥외구조물, 포장재, 경계석, 관수시설, 그리고 급배수시설을 포함하는 12개의 중분류로 나뉘었다. 다음으로 조경객체에 탑재될 속성정보를 도출하고 구조화하였다. 이를 위해 KBIMS(한국 BIM 표준)의 공통 속성정보를 항목에 포함하였고 객체의 종류에 따라 달라지는 객체 속성정보를 영국 조경협회의 PDT(제품정보 템플릿)를 참고하여 추가하였다. 이로써 공통 속성정보에 식별, 보급, 분류체계, 공급정보가 포함되었고, 객체 속성정보에 명명, 규격, 설치 또는 시공, 성능, 지속가능성, 유지관리에 관련된 정보들이 포함되었다. 본 연구는 조경객체의 라이브러리 표준화 방안을 제시함으로써 모델링의 업무 효율성 및 분야 간 BIM 모델의 데이터 정합성을 향상시킴으로써 조경 BIM 도입의 토대를 마련했다는 데에 의의가 있다.

• 한국실내디자인학회논문집
• /
• 제20권6호
• /
• pp.145-152
• /
• 2011

Salvador Dali put a title of his work as 'A Propos of the Treatise on Cubic Form by Juan de Herrera' at 1960. Through this work which is consisted in cube frame surrounding black and white letter squares and nails in the sky, he directly referred about the cube which were showed in his pictures. To understand the meaning of this work, Dali's paintings and Juan de Herrera's design and architectural ideas are analysed by building. His concerning about absolute existence like god and nuclear takes the cubic form by Juan de Herrera instead of pictorial tendencies of Cubism, however pictorial elements such as sky and nails were still used in the work. He use alphabet letter as pattern consisting wall and symbol representing 'Juan de Herrera', moreover number '2' is taken to show up line attribute. Dali had several design develop process, and finally he reached an new stage called 'Hypercube'. Hypercube can distinguish from Cubism and Herrera's architectural idea, and it will be free from objective world based in Euclid geometry. Although cubic is the simplest shape. It can contain the variety of developments in these fields - philosophy, architecture, painting and etc.- from Platon to nuclear physics and coexists in a picture of Salvador Dali.

• 한국주거학회논문집
• /
• 제25권3호
• /
• pp.165-179
• /
• 2014

The purpose of this study was to draw application elements of housing interior design according to user-oriented sensibility types. The sensibility evaluation experiments were conducted to target the general user 118 people using the sensibility evaluation tool for housing interior space. The results of the analysis were as: To produce the 'cozy' space, the colors and materials giving soft and natural feeling should be used. For the 'practical' space, type of ceiling and window that give the visually open feeling, the user-oriented furniture arrangement that allows using the space efficiently. For the 'cheerful' space, the simple and natural effects should be produced by using closed space that stable. For the 'traditional' space, the natural fishing material having rough texture should be used. For the 'unique' space, the space contained the dynamic feeling by the diagonal or vertical line and the graphic expression in the wall. For the 'congenial' emotional space, basic is the symmetric, stable and simple space. On the other hand, for the material, small size, natural texture or typical and soft materials should be used. For the 'sensuous' space, the dynamic and vertical sense of space should be expressed by the type of ceiling. The most important elements for the space of 'gorgeous' sensibility, is the color.

• 한국식생활문화학회지
• /
• 제13권5호
• /
• pp.423-430
• /
• 1998

The purposes of this study were to (a) measuring attitude and satisfaction of Yonsei university students towards contracted vs. rented university foodservices, (b) determine university students' overall satisfaction & perception regarding the factors improved towards university foodservice and (c) provide recommendation on marketing strategies for university foodservices. Questionnaires were hand delivered to 600 Yonsei University students by designated coordinators. A total of 549 questionnaires were usable; resulting in an 93% response rate. The survey was conducted between October 12 to October 18, 1995. Statistical data analysis was completed using the SAS Programs for descriptive analysis, T-test, ${\chi}^2-test$, ANOVA, Factor Analysis and Stepwise Multiple Regression. The results of this study can be summarized as follows: 1. Performance mean score for contracted foodservice management in terms of food, menu, price, hygiene, facilities was higher than for rented foodservice management. 2. The average satisfaction score for contracted foodservice management in terms of price was lower than for rented foodservice management. There was no gap between contracted foodservice management and rented foodservice management in overall satisfaction score and price satisfaction score. 3. Perception regarding the factors improved of thirteen factors to be improved except operating hours, waiting time, price, food quantity were perceived as better by students. 4. Perception regarding the factors improved have correlation with foodservice qualify attribute's performance. 5. According to multiple regression analysis, 92.05% of the variance in respondents' satisfaction score could be explained by procedure after meal, purchasing procedure, operating hours, availability of breakfast, waiting time, atmosphere, price, facilities, service endeavor to survey satisfaction in foodservice, availability of kitchen and wall space, portion size, taste of food, change of cafeteria name, the number of seats, and variety of menu.