• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.3
• /
• pp.300-306
• /
• 2006

In this paper an error analysis of 3-dimensional GNSS attitude determination system is given. The attitude error covariance matrix is derived and analyzed. It implies that attitude errors are affected by the baseline length and configuration, the satellites numbers and geometry, receiver measurement noises and the nominal attitude of the vehicle. By defining Euler Angle Dilution Of Precision (EADOP) which is analogous to GDOP, roll, pitch and yaw errors can be efficiently analyzed. However the expression of the attitude error is too complex to get some intuitions. Therefore with a commonly adopted assumption, new expressions for attitude error are derived. The formulas are easy to compute and represent the attitude error as a function of the nominal attitude of a vehicle, the baseline configuration and the receiver noise. Using the formula, the accuracy of the attitude can be analytically predicted without the computer simulations. Applications to some widely used configurations reveal the effectiveness of the proposed method.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.4
• /
• pp.480-485
• /
• 2006

In this paper, the error investigation of a 3-dimensional GPS attitude determination system using the error covariance analysis is given. New efficient formulas for computing the Euler Angle Dilution of Precision (EADOP) are also derived. The formulas are easy to compute and represent the attitude error as a function of the nominal attitude of a vehicle, the baseline configuration and the receiver noise. Using the formula, the accuracy of the Euler angle can be analytically predicted without the use of computer simulations. Applications to some configurations reveal the effectiveness of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.69-78
• /
• 1999

The attitude determination system is indispensable for navigation, guidance and control tasks. In order to construct this system some special products that use dual frequencies or have on receiver engine with multiple antennas are used. But they are so expensive. Thus there are still strong requirements for the conventional low cost single frequency off-the-shelf receiver. This paper will propose a new technique to resolve integer ambiguity with single frequency GPS receiver and will show the problems of the attitude applications in which low cost receiver are being used. Also, based on this new technique precise attitude determination is presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.1
• /
• pp.91-98
• /
• 2013

The rigorous requirements of modern spacecraft missions necessitate a precise attitude determination strategy. This paper mainly researches that, based on three space-borne attitude sensors: 3-axis rate gyros, 3-antenna GPS receiver and star-sensor. To obtain global attitude estimation after an information fusion process, a feedback-involved Federated Kalman Filter (FKF), consisting of two subsystem Kalman filters (Gyros/GPS and Gyros/Star-sensor), is established. In these filters, the state equation is implemented according to the spacecraft's kinematic attitude model, while the residual error models of GPS and star-sensor observed attitude are utilized, to establish two observation equations, respectively. Taking the sensors' different update rates into account, these two subsystem filters are conducted under a variable step size state prediction method. To improve the fault tolerant capacity of the attitude determination system, this paper designs malfunction warning factors, based on the principle of ${\chi}^2$ residual verification. Mathematical simulation indicates that the information fusion strategy overwhelms the disadvantages of each sensor, acquiring global attitude estimation with precision at a 2-arcsecs level. Although a subsystem encounters malfunction, FKF still reaches precise and stable accuracy. In this process, malfunction warning factors advice malfunctions correctly and effectively.

• Journal of Aerospace System Engineering
• /
• v.7 no.1
• /
• pp.44-49
• /
• 2013

Passive attitude stabilization method has been widely used for attitude determination and control of cube satellite due to its advantage of system simplicity. In this paper, permanent magnet stabilization method for application of cube satellite attitude control has been introduced and its performance with and without hysteresis damper system has been investigated through a numerical simulation. The simulation results indicate that the permanent magnet stabilization combined with hysteresis damper shows much higher stabilization performance than the system without damper system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.2
• /
• pp.131-139
• /
• 2000

A design of CPS attitude determination system is described in this paper. The designed system is a low cost high precision 24 channel single frequency GPS(Global Positioning System) receiver which provides a precise absolute heading and pitch (or roll) as well as a position. It uses commercial chip-set and consists of two RF parts, two signal-tracking parts, a processor, memory parts and I/Os. In order to determine precise attitude, accurate carrier phase measurements and an efficient integer ambiguity resolution method are required. To meet these requirements, a PLL (Phase Locked Loops) is designed, and an algorithm called ARCE (Ambiguity Resolution with Constraint Equation) is adopted. The hardware and software structure of the system will be described, and the performance evaluated under various conditions will be presented. The test results will promise that more reliable navigation system be possible because the system provides all navigational information such as position, velocity, time and attitude.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1675-1678
• /
• 1997

In this paper, an attitude determination system(ADS) for KOMPSAT using GPS LI carrier phase measurements is considered. The baseline vector is estimated by the Exetnded Kalman Filter (EKF) which used the double differenced carrier phased measuremenmts made by three GPS receivers mounted on the spaceraft. The attitude angles of three axes of spacecrat are computed by the estimated baseline vectors, directly. The proposed ADS is verified by the simulation results.

• Journal of Korea Multimedia Society
• /
• v.24 no.12
• /
• pp.1589-1597
• /
• 2021

Due to the low output rate and time delay of vehicle's navigation results, the electro-optical tracking system(EOTS) cannot estimate accurate target positions. If an inertial measurement unit(IMU) is additionally mounted into the EOTS and inertial navigation system(INS) is constructed, the high navigation output rate can be obtained. And the time-delay can be compensated by using the augmented Kalman filter. An accurate initial attitude is required in order to have accurate navigation outputs. In this paper, an attitude determination algorithm is proposed using the augmented Kalman filter in order to compensate measurement delay of the EOTS and have accurate initial attitude. The proposed initial attitude determination algorithm consists of an augmented Kalman filter, an INS, and an integrated Kalman filter. The augmented Kalman filter compensates the time-delay of the vehicle's navigation results and the integrated Kalman filter estimates the navigation error of the INS. In order to evaluate performance of the proposed algorithm, vehicle's navigation outputs and IMU measurements were generated using sensors' model-based measurement generator and initial attitude estimation errors of the proposed algorithm and the conventional algorithm without the augmented Kalman filter were compared for the generated measurements. The evaluation results show that the proposed algorithm has better accuracy.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.474-477
• /
• 1997

In this paper, an efficient attitude determination algorithm based on the Kalman Filter which combines earth/sun sensor data with gyro data in a mutually compensating manner is presented. Quaternion is used as the attitude state to save computation time and to prevent the gimbal-lock situation associated with Euler angles. Gyro data allows the use of the kinematic equation instead of space vehicle's dynamic equation which is usually based on approximation of the actual dynamics and inaccurate torque information. The gyro data are used to propagate the attitude through kinematic equation and the earth/sun sensor data are used to update the attitude and estimate the gyro bias. Simulation results for the KOMPSAT attitude determination system are presented.

• International Journal of Aeronautical and Space Sciences
• /
• v.6 no.2
• /
• pp.17-22
• /
• 2005

As one of validation tool for attitude determination system, we have used various constraints using priori information which is known through base vector set up. However these conventional constraints cannot guarantee validity in terms of final solutions such as Euler angle. So we suggest attitude boundary concept to verify the final attitude solution on the flying airplane, it is based on the combination of velocity based attitude estimation technique and ambiguity resolution. we can say it can check invalid solution effectively at just one epoch without repeatability test of resolved cycle ambiguity. In this paper we show that the suggested constraint can effectively reject incorrectly resolved cycle ambiguity the conventional constraints have missed.