• Journal of Environmental Science International
• /
• v.15 no.5
• /
• pp.493-501
• /
• 2006

The increase in environmental loads and energy consumptions has resulted in the need of developed new forms of energy for a sustainable use for the society. Recently, the viability of using unused energy has attracted a great deal of attention. From the view point of using unused energy, the most critical problem can be referred to as the distance between the heat source/sink and heat demand area. The water resource in the city water system was used to solve this distance problem with unused energy. The calculation method of the potential use unit was used to survey the potential of the water resource in the city water system. The amount of theoretical unused energy and energy savings in the model city were estimated using this method. It is estimated that the amounts of energy savings and $CO_2$ reduction correspond to 131.3 GWh and 29280[t-C], respectively, per annual basis.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.147-154
• /
• 2010

The world is gradually running short of fossil fuel. Currently, the role of wind turbine is attracting great attention from all over the world. The objective of this study is to investigate blades of Vertical-axial wind turbine (VAWT) for optimum design using the CFD from the aerodynamics point of view. Because one of the performance of wind turbine depends on shape of blades, the study of comparing one gyro mill type blade and a modified one was carried out. Using the results of computation, we calculated and compared RPM for both models at same wind velocity. And we calculated angular acceleration and moment of inertia to find torque in every time-step. And the pressure contour and velocity profile around the blade were analyzed Also, this study is performed to calculate the wake effect.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.67-73
• /
• 1996

The objective of this research is to investigate the behavior of the $F\"{o}rstner$ interest operator, which has been widely used for detecting distinct points in the field of digital photogrammetry and computer vision, in scale space. Considering the hugh volume of digital image utilized in digital photogrammetry, the scale space (image pyramid) approach which appears to be a solution for enhancing image processing, began to gain its attention. The investigation of the $F\"{o}rstner$ interest operator in scale space generated by the Gaussian kernel shows its behavior and feasibility for being used in practice.

• The Journal of Internal Korean Medicine
• /
• v.19 no.1
• /
• pp.291-300
• /
• 1998

Dementia is the neurodegenerative process that affects cognition, behavior and function and one of the most prominent diseases of dementia is Alzheimer's disease(AD). AD is a dementing illness characterized clinically by the progressive and irreversible deafferentation of the limbic system, association neocortex and basal forebrain. A number of conditions are known to be predisposing risk factors for AD. In several of these, initiation of glial-mediated inflammatory pathways as a mechanism of AD is getting a lot of attention. On the other hand, a biochemical marker for monitoring the onset and progression of the disease would be a valuable tool for disease management. Also such a marker might be used as an end point in clinical intervention protocols. This biochemical marker will have the potential for identifying subjects afflicted with the disease and possibly for monitoring the onset and longitudinal progression of the disease. Here we have reviewed the latest papers of different approaches to AD. Of course, there is a section of PET which is very useful clinically nowadays.

• Journal of Chest Surgery
• /
• v.27 no.4
• /
• pp.324-327
• /
• 1994

Resection and reconstruction of distal trachea or carina have posed tremendous technical challenges for surgeons. Successful outcome depends on thorough preoperative evaluation, careful anesthetic management,strict attention of surgical technique and postoperative care. We report a successful case of revision of tracheal stenosis using femoro-femoral bypass on a 13~year-old boy. The patient complained severe dyspnea about I month following right sleeve pneumonectomy. Preoperative CT scan and intraoperative bronchoscopy showed pin-point tracheal stenosis at a tracheo-bronchial anastomosis site about 1.2cm in length.At operation the lesion was severely adhesed and the lumen was nearly obstructed. The stenotic segment was resected and direct end-to-end anastomosis was done under femoro-femoral bypass for adequate oxygenation. The patient was discharged at postop. 16 days without specific complications and has continued to do well.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.194-199
• /
• 2000

The creep rate is affected by the temperature and in fact. if the temperature above $T_M/2(T_M:melting\;point)$. The aim of the present investigation is to study the relationship of static creep and cyclic creep behavior of pure copper and the formulation of these phenomena with the special attention to the instantaneous strain. strain rate from time and number of cycles have the same inclination Steady state creep rate depend upon maximum stress and can be expressed as linear function according to Power law creep equations Creep rupture time has relation with creep rate. and it make a group represented as the same direct line regardless of max stress, stress ratio and the temperature. Initial strain effect on continuous creep deformation. and have guantitative relationship between elastic and Plastic strain. LMP have similar tendency than OSDP and MHP according to temperature

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.563-579
• /
• 2000

Until July 1, 1996, no international rules, other than the simple practices contained in the UCP 500 have existed for the processing of bank-to-bank reimbursements. At last, ICC Uniform Rules for Bank-to-Bank Reimbursements under Documentary Credits(Pub. No. 525) have been published on July 1, 1996. Our country have adopted the URR 525 on August 1996. But in view of the present number of countries adopted the URR 525, I think our country is very impetuous. In order to comprehend the URR 525 correctly, this study is carrying out to clarify the legal principles on reimbursements among issuing banks, nominated banks, unauthorized banks. Secondly, this study is carrying out indicate the background of establishing, the main contents, the approval and the criticism of URR 525. Finally, this study is carrying out to point out the matters that demand special attention about the operation of URR 525

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.295-311
• /
• 1999

An increasing attention is paid to STEP-NC, the next generation CNC controller interfacing STEP-compatible data. In this paper, we first propose an Architecture for the STEP-NC (called FBCC: Feature Baled CNC Controller) accepting feature code compatible with STEP-data, and executing NC motion feature by feature while monitoring the execution status. The main thrust of the paper has been to develop an automatic on-line tool path generation and modification scheme for milling operation. The tool path it generated iota each feature by decomposing into a finite number of primitive features. The key function in the new scheme is haw to accommodate unexpected execution results. In our scheme, the too1 path plinker is designed to have a tracing capability iota the tool path execution so that a new path can be generated from the point where the operation is stopped. An illustrative example is included to show the capability of the developed algorithm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.189-192
• /
• 2001

Recently, STI process is getting attention as a necessary technology for making high density of semiconductor by devices isolation method. However, it does have various problems caused by CMP nprocess, such as torn oxide defects, nitride residues on oxide, damages of si active region, contaminations due to post-CMP cleaning, difficulty of accurate end point detection in CMP process, etc. In this work, the various defects induced by CMP process was introduced and the above mentioned problems of CMP process was examined in detail. Finally, the guideline of future CMP process was presented to reduce the effects of these defects.

• Journal of Power Electronics
• /
• v.12 no.2
• /
• pp.285-293
• /
• 2012

Multilevel inverters have gained attention in high-power applications due to their numerous advantages in comparison with conventional two-level inverters. In this paper a simplified Space-Vector Modulation (SVM) algorithm for a three-level Neutral-Point Clamped (NPC) inverter is implemented on a Freescale$^{(R)}$ DSP56F8037. The algorithm is based on a simplification of the space-vector diagram for a three-level inverter so that it can be used with a two-level inverter. Once the simplification has been achieved, calculation of the dwell times and the switching sequences are carried out in the same way as for the two-level SVM method. Details of the hardware design are included. Experimental results are analyzed to validate the performance of the simplified algorithm.