• Title/Summary/Keyword: Attack Flow

Search Result 615, Processing Time 0.023 seconds

Evaluation of Chloride Attack Resistibility of Heavyweight Concrete Using Copper Slag and Magnetite as Aggregate (동슬래그 및 자철석을 골재로 사용한 중량 콘크리트의 회파블록 적용을 위한 염해저항성 평가)

  • Moon, Hoon;Kim, Ji-Hyun;Lee, Jae-Yong;Chung, Chul-Woo
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.6
    • /
    • pp.483-492
    • /
    • 2017
  • Recently, the coastal area has become the popular place for infrastructure development. To provide a beautiful scenary of costal area to nearby facilities without any hinderance, and also to protect those facilities from the sea water overflow, it is necessary to develop a new type of wave dissipating block, which is a turning wave block. It is noticeable that the top of the turning wave block is flat and thus can provide spaces for various purposes. However, the unit weight of the block decreases due to the presence of pipeline that is installed for turning the direction of the waves. In order to mitigate such problem, a heavyweight concrete needs to be used to increase the resistance against tidal waves. The copper slag and magnetite were used as a source of fine and coarse aggregate, respectively. The 28 day compressive strength of concrete incorporating ordinary and heavyweight aggregate did not show significant differences. It should be noted that the chloride ion penetration resistance was evaluated using NT-BUILD 492 rather than ASTM C 1202 method because concrete incorporating magnetite as a coarse aggregate showed excessive current flow by ASTM C 1202 method. According to the results from NT Build 492 method, which uses the penetration depth of chlorine ions to obtain chloride ion diffusivity, the heavyweight concrete incorporating the copper slag and the magnetite showed the best resistance against the chloride ion penetration. Therefore, it is reasonable to say that heavyweight concrete made with copper slag and magnetite can be used for production of turning wave block.

Free surface effects on 2-D airfoils and 3-D wings moving over water

  • Bal, Sakir
    • Ocean Systems Engineering
    • /
    • v.6 no.3
    • /
    • pp.245-264
    • /
    • 2016
  • The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

'Clinical Observation on the 290 cases of Cerebrovascular Accident' (뇌졸중환자(腦卒中患者) 290례(例)에 대(對)한 임상(臨床) 고찰(考察) (III))

  • Kang, Kwan-Ho;Jun, Chan-Yong;Park, Chong-Hyeong
    • The Journal of Korean Medicine
    • /
    • v.18 no.2
    • /
    • pp.223-244
    • /
    • 1997
  • Clinical observation was done on 290 cases of patients who were diagnosed as CVA with brain CT, TCD, MRI scan and clinical observation. They were hospitalized in the oriental medical hospital of Kyung-Won University from 1st January to 31st December in 1996. 1. The cases were classified into the following kinds : cerebral infarction, cerebral hemorrhage, and transient ischemic attack. The most case of them was the cerebr진 infarction. 2. There is no significant difference in the frequency of strokes in male and female. And the frequency of strokes was highest in the aged over 50. 3. In cerebral infarction the most frequent lesion was the territory of middle cerebral artery, and in cerebral hemorrhage the most frequent lesion was the basal ganglia. 4. The most ordinary preceding disease was hypertension, and the next was diabetes. 5. The rate of recurrence was high in cerebral infarction. 6. The frequency of strokes seems to have no relation to the season. 7. The cerebral infarction occurred usually in resting and sleeping, and the cerebral hemorrhage in acting. 8. The course of entering hospital, most patients visited this hospital as soon as CVA occurred. And the half of patient visited this hospital within 2 days after CVA attack. 9. In the cases of patients who were unconscious at the admission, the prognosis was worse than that of the alert patients. 10. The common symptoms were motor disability and verbal disturbance. 11. The average duration of hospitalization was 27.4 days, and in case of cerebral hemorrhage the duration was prolonged. 12. The average time to start physical therapy was 13.3rd day after stroke in cerebral infarction and it was 19.9th day after stroke in cerebral hemorrhage. 13. The common complications were urinary tract infection, pneumonia, myocardial infarction and so on. 15. At the time of entering hospital, in most cases the blood pressure was high, but blood pressure was well controlled at the time of discharge. 16. Generally reported, hypercholesterolemia and hypertriglyceridemia are usually found in cerebral infarction. But in this study, they were found more frequently in cerebral hemorrhage than in infarction. 17, In the most cases, western and oriental medical treatments were given simultaneously. 18. In acute or subacute stage, the methods of smoothening the flow of KI(順氣), dispelling phlegm(祛痰), clearing away heat(淸熱) or purgation(瀉下) were frequently used. And in recovering stage, the methods of replenishing KI(補氣), tonifying the blood(補血) or tranquilization(安神) were frequently used.

  • PDF

Impact of Asymmetric Middle Cerebral Artery Velocity on Functional Recovery in Patients with Transient Ischemic Attack or Acute Ischemic Stroke (일과성허혈발작 및 급성뇌경색환자에서 경두개도플러로 측정된 중간대뇌동맥 비대칭 지수가 환자 예후에 미치는 영향)

  • Han, Minho;Nam, Hyo Suk
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.50 no.2
    • /
    • pp.126-135
    • /
    • 2018
  • This study examined whether the difference in the middle cerebral artery (MCA) velocities can predict the prognosis of stroke and whether the prognostic impact differs among stroke subtypes. Transient ischemic attack (TIA) or acute ischemic stroke patients, who underwent a routine evaluation and transcranial Doppler (TCD), were included in this study. The MCA asymmetry index was calculated using the relative percentage difference in the mean flow velocity (MFV) between the left and right MCA: (|RMCA MFV-LMCA MFV|/mean MCA MFV)${\times}100$. The stroke subtypes were determined using the TOAST classification. Poor functional outcomes were defined as a mRS score ${\geq}3$ at 3 months after the onset of stroke. A total of 988 patients were included, of whom 157 (15.9%) had a poor functional outcome. Multivariable analysis showed that only the MCA asymmetry index was independently associated with a poor functional outcome. ROC curve analysis showed that adding the MCA asymmetry index to the prediction model improved the discrimination of a poor functional outcome from acute ischemic stroke (from 88.6% [95% CI, 85.2~91.9] to 89.2% [95% CI, 85.9~92.5]). The MCA asymmetry index has an independent prognostic value for predicting a poor short-term functional outcome after an acute cerebral infarction. Therefore, TCD may be useful for predicting a poor functional outcome in patients with acute ischemic stroke.

Computational Fluid Analysis for the Otter Boards - 4 . Efficiency Analysis of the Cambered Otter Boards for the Vortex Generators - (전개판에 대한 수직해법 - 4 . 과발생기에 따른 만곡형전개판의 성능분석 -)

  • 고관서
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.27 no.4
    • /
    • pp.286-292
    • /
    • 1991
  • The authors propose to use the vortex generators in order to improve of the efficiency for the cambered otter boards. The equipments and testing method of this model test was the same as the previous report. This study was tested for 6 models such as the single cambered, the V-shaped cambered and the slotted cambered otter board without and with vortex generators. The results obtained are as follows: \circled1 C sub(L) of the single cambered model otter board with vortex generators was increased about 10% in comparison with that of model without vortex generators, C sub(D) decreased 2%, and L/D increased 5~20%. \circled2 L/D of the V-shaped cambered model otter board with vortex generators was increased 10~20% in comparison with that of model without vortex generators. \circled3 C sub(L) of the two slotted cambered model otter board with vortex generators was increased about 20% within an angle of attack 25$^{\circ}$ in comparison with that of without vortex generators, C sub(D) increased 5~20%, and L/D was higher than prototype within an angle of attack 20$^{\circ}$. \circled4 The separation point of the model otter boards with vortex generators was removed back ward a little in comparison with that of the model without vortex generators. \circled5 Flow speed difference of the back side to the front side of model otter boards with vortex generators was increased a little in comparison with that of the models without vortex generators. \circled6 The size of separation zone in case of the model otter boards with vortex generators was decreased about 10% in comparison with that of the models without vortex generators.

  • PDF

Control Method for the Number of Travel Hops for the ACK Packets in Selective Forwarding Detection Scheme (선택적 전달 공격 탐지기법에서의 인증 메시지 전달 홉 수 제어기법)

  • Lee, Sang-Jin;Kim, Jong-Hyun;Cho, Tae-Ho
    • Journal of the Korea Society for Simulation
    • /
    • v.19 no.2
    • /
    • pp.73-80
    • /
    • 2010
  • A wireless sensor network which is deployed in hostile environment can be easily compromised by attackers. The selective forwarding attack can jam the packet or drop a sensitive packet such as the movement of the enemy on data flow path through the compromised node. Xiao, Yu and Gao proposed the checkpoint-based multi-hop acknowledgement scheme(CHEMAS). In CHEMAS, each path node enable to be the checkpoint node according to the pre-defined probability and then can detect the area where the selective forwarding attacks is generated through the checkpoint nodes. In this scheme, the number of hops is very important because this parameter may trade off between energy conservation and detection capacity. In this paper, we used the fuzzy rule system to determine adaptive threshold value which is the number of hops for the ACK packets. In every period, the base station determines threshold value while using fuzzy logic. The energy level, the number of compromised node, and the distance to each node from base station are used to determine threshold value in fuzzy logic.

Measurement of an Unsteady Boundary Layer of an Oscillating Airfoil at a Low Reynolds Number (저 레이놀즈수에서 진동하는 에어포일의 비정상 경계층 측정)

  • Kim, Dong-Ha;Jang, Jo-Won
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.34 no.12
    • /
    • pp.9-17
    • /
    • 2006
  • An experimental study was carried out to examine the behavior of the unsteady boundary layer. An NACA 0012 airfoil with aspect ratio of 2.7 was set vertically in a test section, which is sinusoidally pitched about the quarter chord. The oscillating amplitude is from -6$^{\circ}$ to +6$^{\circ}$ and the mean angle of attack is 0$^{\circ}$. Surface mounted probes (Glue-on probes) were employed to measure the surface flow of the boundary layer. Measurements were made at free-stream velocities of 1.98, 2.83, and 4.03m/s, and the corresponding Reynolds numbers based on the chord length were 2.3$\times$104, 3.3$\times$104 and 4.8$\times$104, respectively. The reduced frequency is fixed as 0.1 in all cases. The results show that the surface position of minimum shear stress and of boundary layer break-down can be discerned in the Reynolds number between 2.3$\times$104 and 3.3$\times$104.

Decomposition of Aqueous Anatoxin-a Using Underwater Dielectric Barrier Discharge Plasma Created in a Porous Ceramic Tube (다공성 세라믹관내에서 생성되는 수중 유전체 장벽 방전 플라즈마를 이용한 아나톡신-a의 분해)

  • JO, Jin-Oh;Jwa, Eunjin;Mok, Young-Sun
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.30 no.2
    • /
    • pp.167-177
    • /
    • 2016
  • This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

A case of the patient treated with Chunmagudung-um who was diagnosed with Vertebrobasilar insufficiency (척추기저동맥부전환자를 천마구등음(天麻鉤藤飮)으로 치료한 치험 1례)

  • Song, Cheol-Min;Chang, Tong-Young;Rhim, Eun-Kyung;Lee, Yun-Jae;Lee, Jung-Sub;Shin, Sun-Ho;Lee, In;Moon, Byung-Soon;Jeong, Hyun-Ae
    • The Journal of Internal Korean Medicine
    • /
    • v.26 no.3
    • /
    • pp.699-707
    • /
    • 2005
  • Vertebrobasilar insuffciency(VBI) is also refered to as vertebrobasilar transient ischemic attack(V-B TIA). Vertebrobasilar insufficiency is often undiagnosed or misdiagnosed due to complexity of the symptoms. Transcranial doppler(TCD) can be used to possible to record the blood flow velocities in the cerebral arteries through the intact cranium. Transcranial doppler and magnetic resonance angiography(MRA) are both noninvasive techniques that can be used in vertebrobasilar insufficiency, but transcranial doppler is more sensitive with respect to evaluating stenotic lesion of the arteries than magnetic resonance angiographv. Diagnostic values of transcranial doppler were assessed in patients with vertebrobasilar insufficiency. A case of vertebrobasilar insufficiency is here reported. A 62-year-old man with dizzness, nausea and tremor because of vertebrobasilar insufficiency was admitted at Wonkwang Oriental Medicine Hospital. He was treated with the herbal medicine Chunmagudung-um and with acupunture. Results showed improvement of symptoms and favorable transcranial doppler readings. The process used in this successful treatment is here described.

  • PDF

Prediction of Parabolic Antenna Satellite Drag Force in Low Earth Orbit using Direct Simulation Monte Carlo Method (직접모사법을 이용한 지구 저궤도 파라볼릭 안테나 탑재 위성의 항력 예측)

  • Shin, Somin;Na, Kyung-Su;Lee, Juyoung;Cho, Ki-Dae
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.7
    • /
    • pp.616-621
    • /
    • 2014
  • Consumption of the fuel on the satellite operating in low earth orbit, is increased due to the air resistance and the amount of increase makes the satellite lifetime decrease or the satellite mass risen. Therefore the prediction of drag force of the satellite is important. In the paper, drag force and drag coefficient analysis of the parabolic antenna satellite in low earth orbit using direct simulation monte carlo method (DSMC) is conducted according to the mission altitude and angle of attack. To verify the DSMC simulated rarefied air movement, Starshine satellite drag coefficient according to the altitude and gas-surface interaction are compared with the flight data. Finally, from the analysis results, it leads to appropriate satellite drag coefficient for orbit lifetime calculation.