• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.90-99
• /
• 2023

Implant overdentures are widely used as a treatment method to restore oral function in completely edentulous or partially edentulous patients with severe bone resorption. Using a milled bar, it is mechanically advantageous as the implant fixtures are splinted. Applying additional attachments to the bar has the advantage of dispersing the stress applied to the implant. In this case, a patient who used implant overdentures using 4 implants wanted to fabricate a new prosthesis due to repeated fractures of the denture and weakened retention. Milled bar with ADD-TOC attachment and zirconia prosthesis were fabricated by CAD-CAM method and mechanically and aesthetically satisfactory results were obtained.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.117-122
• /
• 1995

The transfer matrix method is proposed to compensate the attachment effect of a piezo-electric impedance head. To validate the proposed method, an experiment is carried out for axial vibration of a uniform rod for which an analytical solution is known. The impedance head is attached to the test rod by a stud and is connected to the exciter. The frequency response function is mesured by applying random excitation from the electro-magnetic exciter. The frequency response function compensated by the method proposed in this research shows good agreement with the analytical solution.

• Electrical & Electronic Materials
• /
• v.7 no.6
• /
• pp.462-472
• /
• 1994

In this paper, electron drift velocity is experimentally measured in SF$_{6}$+N$_{2}$ Gas by induced cur-rent method and quantitaive production of electron transport coefficient is calculated by backward-prolongation of Boltzmann equation. Then electron energy distribution function and attachment coefficients are calculated. This paper can use the electron drift velocity by experimentally and the electron transport coefficient by calculated as a basic data of mixed Gas by comparing and investigating.g.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.800-803
• /
• 2012

본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스를 정합하여 신호 전달 특성을 개선한다. 3차원 FEM(Finite Elements Method) 전자기장 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 추출하고, 신호 전달 특성을 분석한다. SATA 커넥터의 반사 손실 ($S_{dd11}$)은 5 GHz 까지 20 dB 이하의 값을 나타내고, 삽입 손실($S_{dd21}$)은 0.1 dB 이하의 값을 나타낸다. 또한 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스를 추출하여 차동 임피던스를 계산한다. SATA 커넥터의 차동 임피던스는 107.3 ${\Omega}$으로 부정합이다. 차동 임피던스를 정합하기위해서 커넥터 신호 핀을 dx 방향으로 설계 변경한다. $d_x$ 방향으로 0.04 mm 증가 시켰을 때 차동 임피던스가 99.5 ${\Omega}$으로 최적으로 정합되었다. 또한 반사 손실은 1.5 GHz 에서 11 dB 개선되고, 삽입 손실은 최대 약 0.05 dB 개선되었다.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.72-75
• /
• 2001

In this paper, we describe the results of a combined experimental theoretical study designed to understand and predict the dielectric properties of $SF_6$ and $SF_6+Ar$ mixtures. The electron transport, ionization, and attachment coefficients for pure $SF_6$ and gas mixtures containing $SF_6$ has been analysed over the E/N range $30{\sim}300Td$ by a two term Boltzrnann equation and by a Monte Carlo Simulation using a set of electron cross sections determined by other authors, experimentally the electron swarm parameters for 0.2% and 0.5% $SF_6+Ar$ mixtures were measured by time- of- flight method, The results show that the deduced electron drift velocities, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients and mean energy agree reasonably well with the experimental and theoretical for a rang of E/N values.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.10-14
• /
• 2003

Coatings of hydroxyapatite (HA) and tricalcium phosphate/HA (TCP/HA) on titanium were fabricated by ion beam assisted deposition (IBAD). Significant effect of the Ca-P coatings on human Gingival Fibroblasts (HGFs) attachment and formation of type I collagen were found by using immunofluorescence microscope. TCP/HA and HA coatings exerted more HGFs attachment and collagen I formation. Comparing with HA coating, TCP/HA coating exhibited better responses during the late period of the tests. This investigation indicated that this surface modification method may enhance the biological seal at the cervical level of the titanium dental implants.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.11
• /
• pp.9-16
• /
• 2021

As the climate changes rapidly due to warming, it is becoming very important to ensure the stability of environmental structures. It is necessary to choose a material that withstands repeated external forces (wind loads) and satisfies members and joints that have energy absorbing power. Even if the strength of the traffic light attachment is sufficient, if the rigidity is insufficient, there is a limit to the displacement during strong winds. Excessive deformation may cause damage and fall, resulting in a safety accident. The author intends to study mechanical properties and resistance to external environment as a structural material capable of withstanding wind load (50m/sec) by fabricating a C/GFRP composite traffic light attachment using the pultrusion method (Pultrusion).

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.298-305
• /
• 2013

Uniform silica nanobeads were synthesized by St$\ddot{o}$ber method and assembled in the form of monolayer on glass substrate using sonication method. Before the assembly of silica nanobeads, glass substrates were treated with molecular linkers, such as CP-TMS and PEI, and nanobeads were dispersed in toluene. In attachment test, SO (sonication without stacking) method and SS (sonnication with stacking) method was used and sonication time was controled. After the experiment, microbalance was use to measure deviation between before and after the attachment experiment then calculate percent of coverage. Minutely observe with SEM (Scanning Electron Microscopy) then select the most close-packed and monolayer assembled cover glass and calculate DOC (Degree of Coverage). In SO method, DOC increased very sharply and reach over 140 percent point, also got lots of multi-layer region. On the other hand, in SS method DOC increased slower than SO method but more close-packed and monolayer assembled.

• Journal of Korean Academy of Nursing
• /
• v.36 no.7
• /
• pp.1215-1223
• /
• 2006

Purpose: This study was done to understand elderly women within a community who have used lots of drugs. Method: Data was collected through in-depth interviews with four elderly women from April 2001 to February 2002. Data was analyzed by Giorgi's phenomenological method(2000). Results: The components in common with drug usage of elderly women were as follows: 'Awareness of the limitation of physical strength and uncertainty of life', 'Dread of a crisis situation occurring', 'Attachment and dependency on drugs', 'Expectation of a comfortable life and death', 'Prevention of family burden', and 'Pursuit of psychological comfort'. The general structure of experiences was as follows: causal factors were 'Awareness of uncertainty and limitation', 'dread of a crisis situation occurring' the results factor was 'Attachment and dependency on drugs' and the facilitating factors were 'Expectation of a comfortable life and death', 'Prevention of family burden', and 'Pursuit of psychological comfort'. The causal relation was cyclic. This structure showed a realistic adaptation pattern. Conclusion: This study contributed to provide fundamental data for nursing interventions for health promotion and promoting quality of life in elderly women by increasing understanding of the experiences of drugs use.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.125-132
• /
• 2011

Fibrous chitosan membranes were fabricated as a substrate for skin applications using an electro-spinning process with different solvents and varying concentrations. Scanning electron microscopy (SEM) images confirmed that the formation of the chitosan fibrous membrane in trifluoroacetic acid was better than that in acetic acid. Fourier transform infrared spectroscopy showed that the chitosan fibers were cross-linked with glutaraldehyde, and that the cytotoxicity of the aldehyde groups was reduced by glycine and washing by NaOH and DI water. Chitosan cross-linked fibrous membranes were insoluble in water and could be washed thoroughly to wash away glycine and excess NaOH and prevent the infiltration of other water soluble bio-toxic agents using DI water. MTT assay method was employed to test the cytotoxicity of chitosan membranes during fabricating, treating and washing processes. After the dehydration of cell cultured chitosan membranes, cell attachment behavior on the material was evaluated using SEM method. Effect of the treatment processes on the biocompatibility of the chitosan membranes was shown by comparing of filopodium and lamellipodium of fibroblast cells on grown washed and unwashed chitosan fibrous membrane. The MTT assay and SEM morphology confirmed that the washed chitosan fibrous membrane increased cell attachment and cell growth, and decreased toxicity compared to results for the unwashed chitosan fibrous membrane.