• The korean journal of orthodontics
• /
• v.43 no.3
• /
• pp.141-146
• /
• 2013

Objective: Bonding forces of brackets to enamel surfaces may be affected by the procedures used for bleaching and enamel etching. The aim of this study was to investigate the bonding strength of orthodontic brackets to laser-etched surfaces of bleached teeth. Methods: In a nonbleached control group, acid etching (group A) or Er:YAG laser application (group B) was performed prior to bracket bonding (n = 13 in each group). Similar surface treatments were performed at 1 day (groups C and D; n = 13 in each subgroup) or at 3 weeks (groups E and F; n = 13 in each subgroup) after 38% hydrogen peroxide bleaching in another set of teeth. The specimens were debonded after thermocycling. Results: Laser etching of bleached teeth resulted in clinically unacceptable low bonding strength. In the case of acid-etched teeth, waiting for 3 weeks before attachment of brackets to the bleached surfaces resulted in similar, but not identical, bond strength values as those obtained with nonbleached surfaces. However, in the laser-etched groups, the bonding strength after 3 weeks was the same as that for the nonbleached group. Conclusions: When teeth bleached with 38% hydrogen peroxide are meant to be bonded immediately, acid etching is preferable.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.4
• /
• pp.53-60
• /
• 2019

In this study, an experimental study was carried out to evaluate the bond shear performance according to the shear connector between the glue-laminated timber and steel interface. Ten block shear specimens were fabricated according to the configuration of the adhesive surface of wood and steel. In addition, four test specimens were produced according to the main variable shape of the wood-concrete shear connector. As a result of the block shear test, the shear strength of the steel-wood adhesive is shown to have a shear performance greater than the wood-wood shear strength. As a result of the push-out test according to the shape of the shear connector, the shear strength increased linearly with the attachment area. The complete composite behavior between the glued-laminated timber and the steel can be secured.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.3172-3179
• /
• 2011

Several materials using polymer-portland-cement concrete have developed to have not only strength of attachment with body, but also waterproof function and strong anti-sodium chloride properties. Especially, in case of railway, unlike other public transportation, it is very difficult to doing the repair and reinforcement work of structure during service time. Therefore, the development and study of materials having characteristics of structural strength, unification behavior with body, and resistance of crack are very important. Accordingly, the characteristic of material of polymer based concrete is indicated compared with the experiment and analysis through this study, and suggested application to railway tunnel, bridge, and concrete track structure.

• Steel and Composite Structures
• /
• v.6 no.1
• /
• pp.55-69
• /
• 2006

The results of tests conducted on 11 concrete-filled steel tubular columns were reported. Concrete was partially filled in circular steel tubular columns. The primary test parameters were radius and thickness of steel tubes, concrete height, loading patterns and attachment of diaphragm and studs. Concrete strain was measured directly by embedding strain gauges so that the effect of diaphragm on concrete confinement could be investigated. The effects of concrete height and diaphragm on ultimate strength and ductility of steel tubes were investigated. The comparisons of the test results with the existing results for rectangular cross-sections were made on the basis of ultimate strength and ductility of concrete-filled steel tubular columns.

• Journal of the Society of Disaster Information
• /
• v.8 no.4
• /
• pp.391-400
• /
• 2012

Recently, the construction industry commonly uses FRP as a reinforcement material because of its material advantages. FRP attached reinforcement has various advantages such as high strength, stiffness, excellent durability and construction practicability comparing to its weight. However, external attachment of FRP is water-tighted with low water permeable material, not draining water, probably causing damages on a permanent structure. The study manufactured it through pultrusion and examined GP(glass fiber panel) of which material-mechanical properties are almost same as the existing FRP but durability and attachment performance are better by stationary experiments, testing load-deflection curve, destruction types and load-deflection relation under repetitive loading test. As a result of 2,000,000 fatigue tests, it did not result in the destruction and showed excellent permanent attachment and durability as it displays significantly low compressive strain of concrete.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.27-34
• /
• 2014

In-situ $CaCO_3$ formation onto recycled wood pulp was studied to improve optical properties and ash attachment to the fiber furnish in papermaking. We controlled initial reaction temperature of in-situ $CaCO_3$ formation method from $30^{\circ}C$ to $50^{\circ}C$. It was found that the attachment of newly formed $CaCO_3$ to recycled fibers, old newspaper (ONP) in this case, was stronger than that of ground calcium carbonate (GCC, mean dia. $2.4{\mu}m$) addition case, but was not much different among those formed at different temperature. Morphologies of newly formed $CaCO_3$ were changed according to the reaction temperature. More aragonite shape was seen at higher temperature. In-situ $CaCO_3$ formation increased brightness and lowered ERIC value of ONP sheet greatly at the same level of ash contents when compared to GCC addition method, but gave equivalent ERIC and brightness when compared to those of the precipitated calcium carbonate (PCC) addition method. However, tensile strength of the handsheets of the in-situ $CaCO_3$ formation method were much greater than those of the PCC addition method.

• Journal of Korean Academy of Nursing
• /
• v.36 no.7
• /
• pp.1215-1223
• /
• 2006

Purpose: This study was done to understand elderly women within a community who have used lots of drugs. Method: Data was collected through in-depth interviews with four elderly women from April 2001 to February 2002. Data was analyzed by Giorgi's phenomenological method(2000). Results: The components in common with drug usage of elderly women were as follows: 'Awareness of the limitation of physical strength and uncertainty of life', 'Dread of a crisis situation occurring', 'Attachment and dependency on drugs', 'Expectation of a comfortable life and death', 'Prevention of family burden', and 'Pursuit of psychological comfort'. The general structure of experiences was as follows: causal factors were 'Awareness of uncertainty and limitation', 'dread of a crisis situation occurring' the results factor was 'Attachment and dependency on drugs' and the facilitating factors were 'Expectation of a comfortable life and death', 'Prevention of family burden', and 'Pursuit of psychological comfort'. The causal relation was cyclic. This structure showed a realistic adaptation pattern. Conclusion: This study contributed to provide fundamental data for nursing interventions for health promotion and promoting quality of life in elderly women by increasing understanding of the experiences of drugs use.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.41.2-41.2
• /
• 2009

Electrospinning of Polyvinylalcohol (PVA), Gelatin (GE), and PVA/GE blend solutions in acetic acid were investigated to fabricate biodegradable for tissue engineering. The morphology of the electrospun nanofibers was investigated with a field emission scanning electron microscope. The fibers have average diameters in the range 50-150 nm. The miscibility of PVA/GE blend fibers was examined by differential scanning calorimetry.The PVA and GE were immiscible in the as-spun nanofibrous structure. X-ray diffraction (XRD) determined the crystallinity of the membrane and tensile strength for evaluation physical properties. An in vitro study of PVA/GE blend nanofibers was conducted. To assay the cytocompatibility and cell behavior on the PVA/GE blend nanofibrous scaffolds, cell attachment and spreading of fibroblasts seeded on the scaffolds were studied. Our results indicate that thePVA/GE blend nanofibrous matrix, particularly the one that contained 20% PVA and 80% GE could be a good candidate for tissue engineering scaffolds, because it has an excellent cell attachment and spreading for fibroblast cell.

• Journal of the Korean Arthroscopy Society
• /
• v.1 no.1
• /
• pp.66-71
• /
• 1997

The all inside anterior cruciate ligament reconstruction technique places an anterior ligament substitutes within two bony sockets rather than hone tunnel. This approach is accomplished through arthroscopic three portal which avoids the surgical exposure and morbidity associated with creating traditional bone tunnel. This technique has several distinct advantages when compared with the traditional ACL reconstruction through the bone tunnels. It offers the surgeon a less morbid method for ACL reconstruction that positions an ACL substitute at the anatomic attachment sites of the original ACL with two bone sockets, obviating the need for traditional bone tunnels. Graft fixation at or near the anatomic attachment points of the original ACL minimizes creep with early range of motion and reduces the abrasive 'wind-shield wipe' motion of the graft which occur with bone plugs positioned inside bone tunnels. The sagittal posterior angle to the tibial socket increases fixation strength to pullout with anterior translation force for the tibia on the femur. This technique is not graft specific and can accomodate any graft in which graft length can be customized to the intraarticular native ACL length.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.183-184
• /
• 2015

Recent structural approach of the House of Commons has been an increase in demand for dry wall light due to a change in load bearing composite structure of a flat plate type structure under the name of long-life housing, attach the attachment to the wall as the needs of the residents of reserved space increases things that are on the rise. However, depending on the strength of collapse accidents is shown wall and recent wall deposits are required, a load resistance evaluation method of the deposit of the need is the situation. Therefore, in this study, for the evaluation of the evaluation of dry lightweight wall as widely used gypsum board and ALC lightweight wall of two types of laboratory the wall through the previous studies to be installed in direct co-housing to the target and field experiments I want to evaluate the different points.