• 농업과학연구
• /
• 제47권1호
• /
• pp.43-58
• /
• 2020

Mulching plastic is used for the purpose of maintaining soil temperature, moisture, and weed and pest prevention in agriculture. Any remaining plastic after use may contaminate the soil and damage crop growth. To solve this problem, mulching plastic wrappers have been studied and developed, but the actual use rate is quite low due to their poor performance and frequent tearing of the plastic on the field. In this study, we developed a tractor attachable mulching plastic wrapper to minimize the tearing of the mulched plastic. The developed mulching plastic wrapper consists of hydraulic motors and pumps, valves, a microcontroller, and sensors. The collecting speed of the plastic mulch was calculated considering the tractor's travel speed and the radius of the collecting drum. A proportional controller was designed to control the rotating speed of the hydraulic motor as the plastic was wound around the collection drum and the radius increased. The performance of an indoor experiment was quite promising because the difference between the collecting speed predicted by the calculation and the actual collecting speed was 2.71 rpm. Based on a field verification test, the speed difference was max. 14.28 rpm; thus, the, proportional integral derivative (PID) controller needs to be considered to control the drum speed precisely. Another issue was found when the soil covered at the edge of the plastic was hardened or the road surface was uneven, the speed control was unstable, and the plastic was torn. In future research, vibrational plows will be equipped to break-up the harden soil for collecting the plastic smoothly.

• 복식
• /
• 제66권1호
• /
• pp.108-121
• /
• 2016

The objective of the study is to propose diverse knitwear designs by expanding the scope of the use and application of knit fabric. The study looked into diversifying the knitwear designs by using different types of zippers and with the combination of the diversity given by the zipper used in attachable and detachable method and the traditional North European knit patterns. One way of contributing to the diversity of fashion design is to use the zipper, as it can be implemented as an attachable and detachable fastening system. Also, the combination of North European traditional knit patterns with knit fabric can create a new and unique knit styling. The content of the research focuses on the history and definition of North European traditional knitwear based on the analysis of theoretical background, types, and characteristics of the knit patterns. Case studies were observed to show the application of knit patterns. The methods of the study used are preceding research along with research, collection, analysis of data, information from Korean and foreign literature, and Internet websites. During knitwear production, the two types of zippers were used in combination with four traditional Northern European knitwear Aran, Fair Isle, Nordic, and Ropy. The knitting techniques applied in the process were cable fisherman (5GG, SES 124CS) and Tubular Jacquard (3GG, 7GG, SES 122CS) for knitting machinery, and the technique of whole garment for hand knitting.

• 농업과학연구
• /
• 제37권2호
• /
• pp.309-314
• /
• 2010

Bale is an operation of collecting livestock feed materials from field crop residue, and mechanization demand on the operation has been increased. Bailers imported from foreign countries such as Japan and European countries have been used, but those models showed improper performance in Korean situations. In recent years, a steel-roller type round baler attachable to medium size tractors(40 to 60 HP) for effective bale operation in Korea was developed. This study was conducted to evaluate field performance of the baler. For proper baling operation, engine speed was greater than 1,800rpm, average traction force and PTO torque were about 4kN and in a range of 380-671Nm, and maximum values were about 7kN and 3,000Nm, respectively. Performance evaluation tests for sudan grass, rice straw, and blue barley showed that field capacity was 0.59ha/h for blue barley and 0.99ha/h for sudan grass and rice straw. Bale weight, diameter, width, and bulk density were in ranges of 176.1~418.4kg, 1.07~1.12m, 1.02~1.04m, and 175.3~454.1kg/$m^3$. Noise sound level during the baling operation was 4dB greater than idle operation condition, which was considered to be ignorant.

• Korean Chemical Engineering Research
• /
• 제59권2호
• /
• pp.159-164
• /
• 2021

부착형(attachable) 타입의 웨어러블 디바이스 적용을 위한 패브릭(fabric)이나 텍스처(textiles) 타입의 고성능 전극 소재 개발에 대한 필요성이 부각되고 있다. 본 연구에서는 유연 전극 소재로 탄소나노튜브 섬유(CNT fibers)를 응용하고자, CNT fibers의 전기화학적 특성과 이를 적용한 비효소적 글루코스 센싱 성능을 확인하였다. CNT fibers의 표면 구조는 주사전자 현미경(SEM)을 이용하여 분석하였으며, 전기화학적 특성 및 센싱 성능 분석은 시간대전류법와 순환전압 전류법, 전기화학 임피던스 분석법을 이용하여 수행되었다. CNT fibers 전극은 낮은 capacitive current와 산화-환원 화학종과 전극 계면 간의 효율적인 direct electron transfer에 의한 우수한 electrochemical activity 등 향상된 전기화학적 특성으로 인해 높은 감도와 넓은 선형 농도 범위, 그리고 낮은 검출 한계 등 우수한 센싱 특성을 보였다. 따라서, 본 연구는 CNT fibers 기반의 고성능 유연 전극 소재 개발을 위한 기초 연구로 활용될 수 있을 것으로 기대된다.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.749-754
• /
• 2022

다양한 의료 응용 분야에서 웨어러블 및 피부 부착형 전자 패치에 피부 표면의 높은 접착력과 내수성이 요구된다. 본 연구에서는 탄소 기반 전도성 고분자 복합 소재에 개구리 발바닥의 육각 채널와 문어 빨판의 흡착 구조 패턴을 모사한 신축성 있는 전자 패치를 보고한다. 개구리의 발바닥을 모사한 육각 채널 구조는 수분을 배수하며, 균열억제 효과를 통해 점착력을 향상 시키며, 문어 빨판을 모사한 흡착 구조는 젖은 표면에서 높은 점착력을 나타낸다. 또한 고점착 전자패치는 실리콘(max. 4.06 N/cm²), 피부 복제 표면(max. 1.84 N/cm²) 등 다양한 표면에 건조 및 젖은 조건에서 우수한 접착력을 가지고 있다. 고분자 매트릭스와 탄소 입자를 기반으로한 고분자 복합소재를 통해 제작된 고점착 전자 패치는 건조 및 습한 환경에서 심전도(ECG)을 안정적으로 감지할 수 있다. 이 연구에서 보여진 특성을 기반으로 제안된 전자 패치는 다양한 생체 신호의 진단을 위한 웨어러블 및 피부 부착 센서 디바이스를 구현하는 잠재적 응용 가능성을 제시한다.

• 전자통신동향분석
• /
• 제33권1호
• /
• pp.123-130
• /
• 2018

Tactile sensors, which are commonly referred to as pressure and strain sensors, have been extensively investigated to meet the demands for attachable and wearable electronics for monitoring the health status or activity of human users. For this purpose, the introduction of two-dimensional (2D) materials such as graphene and transition metal dichalcogenides (TMDs) with high mechanical strength at the atomic scale is very suitable for tactile sensors applicable for use in human-friendly devices. In this paper, we examine a descriptive summary of a tactile sensor and review state-of- the-art research trends of 2D material-based tactile sensors in terms of the material and architecture. Finally, we propose a roadmap for future studies into advanced tactile sensors based on our ongoing research.

• 한국공작기계학회논문집
• /
• 제11권1호
• /
• pp.38-44
• /
• 2002

In manufacturing die and mold, polishing: is important as it takes as much as 50% of the production cost. In this research, an attachable type polishing device to a WC machining center was developed. experiments were done with a special1y designed rotation type polishing device. Also an ultra-sonic (vibration type) waving device was introduced to acquire finer surface finishes. From the constructed data base based on the experimental results, it is shown that optimal polishing conditions are generated by the combined use of the rotation type tool and the vibration type tool.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.1473-1476
• /
• 2005

데이터 주소의 계수를 위한 하드웨어 설계가 없는 본 노이만(von Neumann) 개념(SISD)의 컴퓨터에서 데이터의 주소지정은 소프트웨어적으로 수행된다. 그러므로 벡터 데이터 요소들의 주소지정은 인덱싱 기법에 의해 그 요소 수만큼 해당 변수들을 만들어서 사용해야 한다. 이것은 데이터 계수기 없이 명령어 계수기, 즉 PC(program counter)만 하드웨어로 설계되기 때문이다. 본 연구에서는 중앙처리장치 외부에 외형적 구조와 크기를 갖는 단위 벡터의 요소를 액세스하는 하드웨어 유닛의 설계를 제안한다. 제안한 방법은 시뮬레이션을 통하여 성능 검증을 하였으며, 실험 결과 동일한 프로세싱 유닛을 가지는 벡터 머신 아키텍쳐보다 12 - 30 % 정도 우수한 성능을 내는 것을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제25권2호
• /
• pp.79-88
• /
• 2000

Effects on tractive performance of design parameters of cage wheel as a traction aid to driving tires of tractor in wet paddy field were investigated experimentally. an experimental cage wheel was designed so that the design parameters such as wheel diameter, wheel width, lug pitch and lug angle could be varied during traction test, The traction test was conducted in two different types of wet paddy field ; shallow and deep harpan fields . Experimental results showed that tractive performance is affected by both soil conditions and the design parameters. A considerable improvement on the tractive performance was obtained by using a cage wheel with 45$^{\circ}$ lug angle in shallow hardpan and smaller lug pitch in deep hardpan. The diameter of cage wheel was mostly influential to the tractive performance both in shallow and deep hardpans.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.143-149
• /
• 2002

Robot are necessary to automate the work on a vertical plane of work piece to produce a large structure like a ship, so that a permanent magnet wheel has been attempted to be used for a mobile robot. Its adhesive power was enhanced by restricting the occurrence direction of magnetic flow. Furthermore a method which weakened the adhesive force was developed for easy detachement of the wheel by changing magnetic flow with metal pin. To measure the characteristics of the adhesive and detaching farces, a load call and a gaussmeter were used. The result showed that the adhesive power was reduced to 1/3 of normal state by using 4 inducing pins.