• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.570-578
• /
• 2006

A severely atrophic maxilla may disturb the proper implant placement. The various bone graft techniques are required for simultaneous or delayed implantation in the cases of atrophic alveolar ridges. We present 11 consecutive patients treated with simultaneous implantation using the autogenous inlay and/or onlay bone grafts from iliac crest to the floor of the maxillary sinus and the alveolar crest. In the cases of atrophic maxilla, a total 69 implants were simultaneously placed with autogenous iliac bone graft. 40 fixtures were inserted in the sinus floor simultaneously with subantral block bone graft, the other 29 fixtures were placed in the anterior or premolar areas with block or particulate bone graft. The vertical alveolar bone height was measured with Dental CT at the preoperation and 6 months postoperation. Moreover, the implant stability quotients (ISQ) were measured by $Osstell^{TM}$ during second implant surgery at 6 months later of first implantation. All implants were obtained successful osseointegration with the grafted bone. The mean vertical increases were 3.9mm in the anterior ridges and 12.8mm in the posterior ridges. During the second implant surgery, mean ISQ were 62.95 in the anterior ridge and 61.32 in the posterior ridge. We concluded that the simultaneous implantation with autogenous iliac bone graft were stable and available methods for severely atrophic maxilla.

• 대한치과보철학회지
• /
• 제54권4호
• /
• pp.407-412
• /
• 2016

심하게 흡수된 치조제를 지닌 환자에게 적절한 의치를 제공하기 위한 한 가지 방법으로써 중립대 인상 기법을 이용한 의치의 제작을 고려해 볼 수 있다. 중립대 내에 인공 치아를 배열하는 것은 다음의 두 가지 목적을 이루고자 함이다. 첫째, 치아가 정상적인 근육의 기능을 방해하지 않도록 하기 위함이며, 둘째, 의치에 저항하여 가해지는 근육 조직의 힘이 안정과 유지에 더 유리하게 작용할 수 있도록 하기 위함이다. 본 증례의 환자는 심한 잔존 치조제의 흡수를 보이는 78세 여자 환자로 오랜 기간 불안정한 상 하악 총의치를 사용하고 있었다. 의치의 안정과 유지를 향상시키기 위하여 중립대 인상 기법을 통한 새로운 의치의 제작을 계획하였다. Modeling compound를 이용하여 중립대를 인기하였으며 치아 배열 후 external impression을 시행함으로써 정확한 연마면을 형성할 수 있었다. 완성된 상 하악 총의치는 보다 향상된 안정과 유지를 보였으며 환자 역시 새로 제작된 의치에 만족감을 보였기에 이를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제34권3호
• /
• pp.232-238
• /
• 2018

가동성 조직은 총의치의 안정성을 감소시키므로, 최종의치의 제작 전에 조직의 상태를 개선시킨 후 적합하게 수정된 인상 방법을 사용하여야 하며, 적절한 중심위를 채득해야 한다. 본 증례는 상악의 가동성 조직과 하악 치조제의 심한 흡수를 보이는 67세의 무치악 여자 환자로, 고딕 아치 기록을 이용하여 치료용 의치를 제작한 뒤 조직조정을 시행하였다. 최종의치는 window opening 인상채득법과 고딕 아치 기록, 그리고 설측 교두 교합을 이용하여 제작하였고, 심미적 및 기능적으로 만족스러운 결과를 얻었기에 이를 보고하는 바이다.

• 대한치과의사협회지
• /
• 제40권9호통권400호
• /
• pp.709-715
• /
• 2002

Two patients with sufficient vertical bone height but insufficient bone width in the anterior mandibular edentulous area, less than 6mm in the buccolingual aspect, for implant placement were chosen for treatment with a ridge splitting procedure. The surgical technique involving greenstick fracture is described. This ridge splitting procedure could be simple placement of implants into ideal restorable positions in severely atrophic, knife-edged ridges and predictable for narrow edentulous alveolar ridge augmentation associated with implant placement. We experienced two cases to place implant with insufficient bone width in the anterior mandibular edentulous area for overdenture be ridge splitting technique. Thus, we will report two cases and review of the literature.

• Journal of Periodontal and Implant Science
• /
• 제52권4호
• /
• pp.261-281
• /
• 2022

Purpose: Short implants are a potential alternative to long implants for use with bone augmentation in atrophic jaws. This meta-analysis investigated the survival rate and marginal bone level (MBL) of surface-modified short vs. long implants. Methods: Electronic and manual searches were performed for articles published between January 2010 and June 2021. Twenty-two randomized controlled trials (RCTs) comparing surface-modified short and long implants that reported the survival rate with at least 1 year of follow-up were selected. Two reviewers independently extracted the data, and the risk of bias and quality of evidence were evaluated. A quantitative meta-analysis was performed regarding survival rate and MBL. Results: The failure rates of surface-modified short and long implants differed significantly (risk ratio, 2.28; 95% confidence interval [CI], 1.46, 3.57; P<0.000). Long implants exhibited a higher survival rate than short implants (mean follow-up, 1-10 years). A significant difference was observed in mean MBL (mean difference=-0.43, 95% CI, -0.63, -0.23; P<0.000), favoring the short implants. Regarding the impact of surface treatment in short and long implants, for hydrophilic sandblasted acid-etched (P=0.020) and titanium oxide fluoride-modified (P=0.050) surfaces, the survival rate differed significantly between short and long implants. The MBL differences for novel nanostructured calcium-incorporated, hydrophilic sandblasted acid-etched, and dual acid-etched with nanometer-scale calcium phosphate crystal surfaces (P=0.050, P=0.020, and P<0.000, respectively) differed significantly for short vs. long implants. Conclusions: Short surface-modified implants are a potential alternative to longer implants in atrophic ridges. Long fluoride-modified and hydrophilic sandblasted acid-etched implants have higher survival rates than short implants. Short implants with novel nanostructured calcium-incorporated titanium surfaces, hydrophilic sandblasted acid-etched surfaces, and dual acid-etched surfaces with nanometer-scale calcium phosphate crystals showed less marginal bone loss than longer implants. Due to high heterogeneity, the MBL results should be interpreted cautiously, and better-designed RCTs should be assessed in the future.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.117-122
• /
• 2014

Objectives: The purpose of this study was to evaluate the sinus bone graft resorption over 3 years after two-stage implant placement. Materials and Methods: The subjects for this study included 30 patients whose maxillary posterior ridges were too atrophic for implants. Bone-added osteotome sinus floor elevation was used in 15 maxillary sinuses, while the bone graft by lateral approach technique was used in 25 maxillary sinuses. The height from the top of the fixture to the sinus floor was estimated immediately after implant placement and the follow-up period was over 3 years. The surgery was classified with two groups: sinus bone grafting with and without autogenous bone. All implants were placed simultaneously. Results: The mean vertical bone loss was $3.15{\pm}2.95mm$. The survival rate of implants was 94.7%. Conclusion: The amount of bone resorption was not significantly associated with the surgical methods, the type of bone graft materials used, or sinus perforation during surgery.

• 구강회복응용과학지
• /
• 제34권4호
• /
• pp.324-330
• /
• 2018

심하게 흡수된 치조제에서 안정적으로 유지될 수 있는 의치를 제작하기 위해서는 적절한 교합의 형성뿐만 아니라 주변근육 조직과의 조화를 고려한 적절한 연마면의 형성에 대한 고려가 필요하다. 중립대 인상 기법을 통해 기능하는 동안 혀, 볼, 입술에 대한 근신경계가 평형을 이루는 잠재적인 영역을 고려하여 인공치아를 배열하고, 연마면 형태가 동적인 근육의 해부학적 형태를 따르도록 할 수 있으며, 이는 의치의 안정과 유지 및 심미성을 향상시킬 수 있다. 본 증례는 심한 잔존 치조제의 흡수를 보이는 환자에게 중립대 개념을 적용하여 기능과 심미적인 측면에서 임상적으로 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권3호
• /
• pp.266-275
• /
• 2008

저자들은 잔존 치조골의 흡수 및 위축으로 통상적인 임플란트 시술이 어려운 증례에서 하악골의 하악지에서 자가골을 채취하여 이를 증례에 따라 블록형 혹은 입자형으로 골 이식술을 시행하여 다양한 증례에 적용하여 비교적 만족할 만한 임플란트 식립 수술이 가능하였던 바 이를 문헌고찰과 함께 보고하며, 본 연구에서는 다양한 술식의 임상적 활용에 대해서만 보고하였으나 향후 이러한 증례들에 대하여 보다 장기적인 추적조사와 골 이식된 부위의 골 조직의 재형성 식립된 임프란트의 보철적인 기능과 장기적인 예후에 대한보다 체계적인 연구가 필요하리라 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.590-594
• /
• 2006

Dental implant has become one of the important option for completely or partially edentulous patients, But it is challenging to reconstruct the severely atrophic ridge. Insufficient bone volume could restrict to place the wide and long implant and because of excessive interocclusal clearance, improper prosthetics could be produced. In this case bone augmentation for implant dentistry is necessary procedure to improve the insufficient bone volume. Therefore, bone augmentation or GBR is the most important procedure for successful implant placement and for ideal crown- root ratio. There are various bone augmentation techniques have been introduced recently; like block bone graft, distraction osteogenesis, inlay graft, onlay graft, etc.... In severe bucco-lingual resorption area, ridge splitting is the first choice of the treatment, because it provides a place for implantation and also has compaction effect. This technique may be indicated for sharp mandible and maxillary ridges in patients whose bone quantity is inadequate for primary stabilization. We report that the clinical experience of bone augmentation using ridge splitting technique in bucco-lingual bone resorption area.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권4호
• /
• pp.312-321
• /
• 2007

Purpose: Distraction osteogenesis has been applied to the maxillofacial implantology and good experimental and clinical results have been reported. However, histologic studies of implants placement on distraction osteogenesis of atrophic alveolar ridges are scarce. In this study, we compare the bone formation between in the transport part and in the distraction part by histomorphometric analysis. Materials & methods: Three adult beagle dogs were served as experimental subjects. The 2 premolars and 1st molar were extracted on the Lt. side of mandible in each beagle dog. After one month later, osteotomy was performed and distraction device was adapted. Distraction was performed with gradual incremental separation of two bone pieces at a rate of 1.0mm per day for 5 days. During consolidation phase, new bone was formed in the distraction zone between the separated bone pieces. 5 weeks after distraction phase, 3 implants were placed in each beagle dog. The implants were inserted through transport part and distraction part and inferior basal bone. The animals were sacrificed at 2 weeks, 4 weeks, and 12 weeks after implant placement. BIC and BA of implants on distraction part and transport part were measured histomorphometrically. Results: BIC, BA increased after implant placement as time goes by passes and new bone formation was slightly higher in transport part than in distraction part at 2 weeks, 4 weeks after implant placement. At 12 weeks after implant placement, BIC, BA of were 74%, 61% in transport part and 77%, 59% in distraction part, therefore there were no difference in BIC and BA between transport part and distraction part at 12 weeks after implant placement.