• 한국해양학회지
• /
• 제11권2호
• /
• pp.64-70
• /
• 1976

기수호인 화진포에 대한 생태학적인 연구가 여러 차례에 걸쳐 실시된 바 있으나( 홍사오외 1969; 엄규백, 1971, 1973; 전승관 외 1969; 변충규 외 1975) 현생퇴적물에 대한 퇴적환경적 연구는 실시된 바 없다. 따라서 본 연구에서는 화진포의 퇴적물에 대한 조직표준치와 분포 특성 및 호수퇴적물중에 포함된 점토광물의 종류와 호수퇴적물의 화학성분을 퇴적과정의 퇴적요인으로 하여 본 역의 현생퇴적환경특성을 밝히고자 한다.

• 지질공학
• /
• 제19권4호
• /
• pp.501-508
• /
• 2009

이 연구는 미원과 충주지역을 중심으로 한 옥천변성대 지역에서 절개지사면 토층붕괴와 관련하여 흙의 주요 특성을 알기위해 수행되었다. 실내시험을 위하여 붕괴지 토층과 인근의 비붕괴지 토층에서 35개 사면으로부터 불교란 시료와 교란 시료를 각각 채취하여 일련의 물성시험과 역학시험을 하였다. 분석결과에 의하면 붕괴지 사면의 토질특성은 흙의 활동지수(AMI)가 0.75 이상이고, 액성한계가 32% 이상, 함수비가 31% 이상일 때 붕괴에 취약한 것으로 나타났다. 그리고 붕괴지 토층의 소성지수는 습윤밀도 및 포화밀도와 상관성이 있으며, 소성지수가 크면 간극비가 작아도 붕괴에 취약한 것으로 나타났다. 입도분포는 점토의 함량보다는 모래나 자갈의 함량이 많을수록 붕괴에 더 영향을 미치는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제32권5호
• /
• pp.1604-1612
• /
• 2011

We developed three-dimensional quantitative structure activity relationship (3D-QASR) models for 17 adamantyl derivatives as P-glycoprotein (P-gp) inhibitors. Eighteen different partial charge calculation methods were tested to check the feasibility of the 3D-QSAR models. Best predictive comparative molecular field analysis (CoMFA) model was obtained with the Austin Model 1-Bond Charge Correction (AM1-BCC) atomic charge. The 3D-QSAR models were derived with CoMFA and comparative molecular similarity indices analysis (CoMSIA). The final CoMFA model ($q^2$ = 0.764, $r^2$ = 0.988) was calculated with an AM1-BCC charge and electrostatic parameter, whereas the CoMSIA model ($q^2$ = 0.655, $r^2$ = 0.964) was derived with an AM1-BCC charge and combined steric, electrostatic, hydrophobic and HB-acceptor parameters. Leave-five-out (LFO) cross-validation was also performed, which yielded good correlation coefficient for both CoMFA (0.801) and CoMSIA (0.656) models. Robustness of the developed models was checked further with 1000 run bootstrapping analyses, which gave an acceptable correlation coefficient for CoMFA (BS-$r^2$ = 0.997, BS-SD = 0.003) and CoMSIA (BS-$r^2$ = 0.996, BS-SD = 0.018).

• Corrosion Science and Technology
• /
• 제12권2호
• /
• pp.65-78
• /
• 2013

The present investigation deals with the corrosion inhibition of mild steel in 1M $H_2SO_4$ with 1, 4-dihydro pyridine and its derivatives prepared using microwave activation method. The synthesis of inhibitor was confirmed by IR spectra. The effect of 1, 4-dihydropyridine derivatives on the corrosion inhibition of mild steel in 1M $H_2SO_4$ was studied using weight loss and electrochemical polarization techniques. Influence of temperature (303-333K) and synergistic effect of halide ions ($I^-$, $Br^-$ and $Cl^-$) on the inhibition behaviour was also studied. Corrosion products on the metal surface were analyzed by scanning electron microscopy (SEM) and a possible mechanism of inhibition by the compounds is suggested. Thermodynamic parameters were calculated using weight loss data in order to elaborate the mechanism of corrosion inhibition. Polarization measurements revealed that the studied compounds acted as mixed type inhibitor but slightly anodic in nature. Electrochemical impedance measurements revealed that the compounds were adsorbed onto the carbon steel surface and the adsorption obeyed the Langmuir adsorption isotherm. The synergistic effect of halide ions on the IE increases with increase in concentration. The IE obtained from atomic absorption spectrophotometric studies was found to be in good agreement with that obtained from the conventional weight loss method. SEM revealed the information of a smooth, dense protective layer in presence of the inhibitors.

• Composites Research
• /
• 제31권3호
• /
• pp.83-87
• /
• 2018

An object in the Low Earth Orbit (LEO) is affected by many environmental conditions unlike earth's surface such as, Atomic oxygen (AO), Ultraviolet Radiation (UV), thermal cycling, High Vacuum and Micrometeoroids and Orbital Debris (MMOD) impacts. The effect of all these parameters have to be carefully considered when designing a space structure, as it could be very critical for a space mission. Polybenzimidazole (PBI) is a high performance thermoplastic polymer that could be a suitable material for space missions because of its excellent resistance to these environmental factors. A thin coating of PBI polymer on the carbon epoxy composite laminate (referred as CFRP) was found to improve the energy absorption capability of the laminate in event of a hypervelocity impact. However, the overall efficiency of the shield also depends on other factors like placement and orientation of the laminates, standoff distances and the number of shielding layers. This paper studies the effectiveness of using a PBI coating on the front bumper in a multi-shock shield design for enhanced hypervelocity impact resistance. A thin PBI coating of 43 micron was observed to improve the shielding efficiency of the CFRP laminate by 22.06% when exposed to LEO environment conditions in a simulation chamber. To study the effectiveness of PBI coating in a hypervelocity impact situation, experiments were conducted on the CFRP and the PBI coated CFRP laminates with projectile velocities between 2.2 to 3.2 km/s. It was observed that the mass loss of the CFRP laminates decreased 7% when coated by a thin layer of PBI. However, the study of mass loss and damage area on a witness plate showed CFRP case to have better shielding efficiency than PBI coated CFRP laminate case. Therefore, it is recommended that PBI coating on the front bumper is not so effective in improving the overall hypervelocity impact resistance of the space structure.

• Journal of Radiation Protection and Research
• /
• 제1권1호
• /
• pp.1-9
• /
• 1976

핵임계사고시(核臨界事故時)에 방출(放出)되는 속중성자(速中性子)가 산란중성자(散亂中性子)로 중첩(重疊)되어 있는 상태(狀態)에서 방사화(放射化) 및 발단방사화검출기(發端放射化檢出器)를 이용(利用)하여 속중성자(速中性子)를 측정(測定) 및 해석(解析)할 수 있는 한 방법(方法)을 제안(提案)하였으며 이 측정(測定)에 있어서 주요인자(主要因子), 즉(卽) 몇개의 발단방사화검출기(發端放射化檢出器)에 대(對)한 평균핵반응단면적(平均核反應斷面積)과 중성자당선량환산계수(中性子當線量換算係數)를 전자계산기(電子計算機)로 계산(計算)하였다. 그 결과(結果) 핵분열중성자(核分裂中性子)의 스펙트럼 측정(測定)에는 발단(發端)에너지가 높은 검출기(檢出器)가 유리(有利)한 것에 반(反)해 발단(發端)에너지가 낮은 것은 산란매질(散亂媒質)이 없는 핵임계장치(核臨界裝置)의 사고시(事故時)에 있어서 속중성자(速中性子)의 시적분선속밀도(時積分線束密度) 측정계(測定計) 유용(有用)한것 같았다. 그리고 유황(硫黃)의 (n, p) 핵분열(核分裂)에 대(對)한 평균단면적(平均斷面積)은 핵분열(核分裂) 중성자(中性子)의 해석적(解析的) 표현식(表現式)에 무관(無關)한 것 처럼 보였다 .그밖에 중성자당(中性子當) 선량환산계수(線量換算係數)의 변화(變化)는 핵분열(核分裂) 중성자(中性子) 스펙트럼의 해석적(解析的) 표현식(表現式)과 핵분열상태(核分裂形態)에 따라 민감(敏感)하게 변화(變化)되지 않은 것 같았다.

• 천문학회보
• /
• 제38권2호
• /
• pp.38.2-38.2
• /
• 2013

Several studies have reported the presence of sodium excess objects having neutral atomic absorption lines at $5895{\AA}$ (NaD) and $8190{\AA}$ that are deeper than expected based on stellar population models that match the stellar continuum. The origin of these lines is therefore hotly debated. van Dokkum & Conroy proposed that low-mass stars (0.3M) are more prevalent in massive early-type galaxies, which may lead to a strong NaI 8190 line strength. It is necessary to test this prediction, however, against other prominent optical line indices such as NaD, Mgb, and Fe5270, which can be measured with a significantly higher signal-to-noise ratio than NaI 8190. We identified a new sample of roughly one thousand NaD excess objects (NEOs; ~8% of galaxies in the sample) based on NaD line strength in the redshift range 0.00${\alpha}$-enhanced" ([${\alpha}/Fe$] ~ 0.3), "metal-rich" ([Z/H] ~ 0.3), and, especially, "Na-enhanced" ([Na/Fe] ~ 0.3).

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.63-69
• /
• 2017

In this work, two different platinum (Pt) counter electrodes have been prepared by spin coating a Pt solution and screen printing a Pt paste on fluorine doped tin oxide (FTO) glass substrate followed by sintering at $380^{\circ}C$ for 30 min. Linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) analyses of the Pt electrodes showed that the spin coated electrode was catalytically more active than the screen printed electrode. The above result agrees well with the surface morphology of the electrodes studied by atomic force microscopy (AFM) and the photovoltaic performance of the dye-sensitized solar cells (DSSCs) fabricated with the Pt electrodes. Moreover, calculation of current density-voltage (j-V) curves according to diode model with the parameters obtained from the experimental j-V curves and the EIS data of the DSSCs provided a quantitative insight about how the catalytic activity of the counter electrodes affected the photovoltaic performance of the cells. Even though the experimental situations involved in this work are trivial, the method of analyses outlined here gives a strong insight about how the catalytic activity of a counter electrode affects the photovoltaic performance of a DSSC. This work, also, demonstrates how the photovoltaic performance of DSSCs can be improved by tuning the performance of counter electrode materials.

• 경영과학
• /
• 제11권2호
• /
• pp.1-27
• /
• 1994

A reliability data processing MPRDP (Multi-Purpose Reliability Data Processor) has been developed in FORTRAN language since Jan. 1992 at KAERI (Korean Atomic Energy Research Institute). The purpose of the research is to construct a reliability database(plant-specific as well as generic) by processing various kinds of reliability data in most objective and systematic fashion. To account for generic estimates in various compendia as well as generic plants' operating experience, we developed a 'three-stage' Bayesian procedure[1] by logically combining the 'two-stage' procedure[2] and the idea for processing generic estimates[3]. The first stage manipulates generic plant data to determine a set of estimates for generic parameters,e.g. the mean and the error factor, which accordingly defines a generic failure rate distribution. Then the second stage combines these estimates with the other ones proposed by various generic compendia (we call these generic book type data). This stage adopts another Bayesian procedure to determine the final generic failure rate distribution which is to be used as a priori distribution in the third stage. Then the third stage updates the generic distribution by plant-specific data resulting in a posterior failure rate distribution. Both running failure and demand failure data can be handled in this code. In accordance with the growing needs for a consistent and well-structured reliability database, we constructed a generic reliability database by the MPRDP code[4]. About 30 generic data sources were reviewed and available data were collected and screened from them. We processed reliability data for about 100 safety related components frequently modeled in PSA. The underlying distribution for the failure rate was assumed to be lognormal or gamma, according to the PSA convention. The dependencies among the generic sources were not considered at this time. This problem will be approached in further study.

• 한국진공학회지
• /
• 제2권4호
• /
• pp.439-454
• /
• 1993

The phase sequence of codeposited Co-Si alloy and Co/si multilayer thin film was investigated by differential scanning calormetry(DSC) and X-ray diffraction (XRD) analysis, The phase sequence in codeposition and codeposited amorphous Co-Si alloy thin film were CoSilongrightarrow Co2Si and those in Co/Si multilayer thin film were CoSilongrightarrowCo2Silongrightarrow and CoSilongrightarrowCo2Si longrightarrowCoSilongrightarrowCoSi2 with the atomic concentration ration of Co to Si layer being 2:1 and 1:2 respectively. The observed phase sequence was analyzed by the effectvie heat of formatin . The phase determining factor (PDF) considering structural facotr in addition to the effectvie heat of formation was used to explain the difference in the first crystalline phase between codeposition, codeposited amorphous Co-Si alloy thin film and Co/Si multilayer thin film. The crystallinity of Co-silicide deposited by multitarget bias cosputter deposition (MBCD) wasinvestigated as a funcion of deposition temperature and substrate bias voltage by transmission electron microscopy (TEM) and epitaxial CoSi2 layer was grown at $200^{\circ}C$ . Parameters, Ear, $\alpha$(As), were calculate dto quantitatively explain the low temperature epitaxial grpwth of CoSi2 layer. The phase sequence and crystallinity had a stronger dependence on the substrate bias voltage than on the deposition temperature due to the collisional daxcade mixing, in-situ cleannin g, and increase in the number of nucleation sites by ion bombardment of growing surface.