• 한국가스학회지
• /
• 제16권4호
• /
• pp.44-51
• /
• 2012

대부분의 산업시설이 유해물질을 다루고 있기 때문에 산업시설의 사고발생은 막대한 물적, 인적 피해를 발생시키므로 안전관리, 중대형 사고 예방 및 위험 예측 등이 중요시 되고 있다. 특히, 유해물질 누출사고는 누출물질, 저장시설, 대기 상태에 따라 유독가스의 확산 속도와 범위가 달라지므로 이를 모사하는 대기확산 시스템이 이용되어왔다. 모사에 기반하는 대기확산 시스템은 산업시설 구조물 설계 단계에서 주로 사용되며 누출 사고 시 즉각적인 처리와 대응이 어렵다. 실시간 대기정보 데이터를 이용한 연구 및 사례는 존재하지만 시스템의 성능저하 및 전문적 지식의 결여로 신속한 처리 및 대응이 미흡하였다. 본 논문은 에너지 플랜트 환경에서 특수성과 효율성을 강화하여 유해화학물질 누출로 인한 대기확산범위를 즉각적으로 산출하고 누출 시점 및 지점을 지능형 알고리즘으로 결정함으로써 사고예방형 실시간 지능형 대기확산 시스템을 구현한다.

• 한국대기환경학회지
• /
• 제21권5호
• /
• pp.537-545
• /
• 2005

A new dispersion model for dense gas is constructed in the Lagrangian framework. Prediction of concentration by the proposed model is compared with measure data obtained in the experiment conducted in Thorney Island in 1984. Two major effects of dense gas dispersion, gravity slumping and stratification effect, are successfully incorporated into LDM (Lagrangian dense gas model). Entrainment effect is naturally modelled by introducing stochastic dispersion model with the effect of turbulence suppression by stratification. Not only various releasing conditions but also complex terrain can be extended to, although proposed model is appropriate for flat terrain.

• 한국대기환경학회지
• /
• 제3권2호
• /
• pp.39-45
• /
• 1987

Rubber particles emitted from automobile tire tread by abrasion were collected by Andersen sampler with atmospheric dusts. The samples of atmospheric dusts at each stage were analysed for rubber particles by Curie point pyrolysis-gas chromatography with Apiezon grease L column. Pyrolysis was done at 740$^circ$C for 5 seconds. In the pyrogram, NR rubber (bus and truck tire tread) was determined by isoprene peak, and SBR rubber (passenger car tire tread) was determined by styrene peak simultaneously. The size distribution of rubber particles was proportioned with the size of rubber particles. The concentrations of NR and SBR rubber were 0.23 $\mug/m^3$ and 1.31 $\mug/m^3$, respectively, in the atmospheric dusts which were collected from the street in front of Yonsei University on April 1986. The ratio of tire tread rubber in the atmospheric dusts was about 0.63%.

• Korean Chemical Engineering Research
• /
• 제60권3호
• /
• pp.452-458
• /
• 2022

3가지 종류의 기-액 하이브리드 수평형, 수직형 그리고 needle-to-cylinder형 플라즈마 반응기가 제작되었다. 이들 반응기를 통하여 대기압 플라즈마 방전에서 발생하는 반응 활성종 생성과 전극 내의 전위차를 통한 세정성분의 기-액 활성화 반응을 일으키는 고효율 친환경 기반의 세정 개념을 제시하였다. 세정성능에 대한 효율성을 비교한 결과, needle-to-cylinder형 반응기가 가장 우수한 특성을 가졌다. 본 연구를 통해 기-액 하이브리드 대기압 플라즈마 반응기가 반도체 공정 등 초정밀 세정공정에 응용 가능성이 있음을 확인하였다.

• 한국대기환경학회지
• /
• 제14권5호
• /
• pp.499-506
• /
• 1998

Recently almost wastes except recycled garbage are dumped into landfill site in Korea. Landfills are significant compounds (NMOCS) are produced. NMOCS include reactive volative organic compound (VOC) and hazardous air pollutants. LAEEM (Landfill Air Emissions Estimation Model) developed by Control Technology Center, V.S. EPA is used to estimate a mount of landfill gas from all landfills. As the result, landfill gas 4,121,000 ton, carbon dioxide 2,951,000 ton, methane 1,1120,000 ton are estimated as emissions from all landfills in Korea.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.303-315
• /
• 2004

The change of land use such as the construction of way in mountainous area and tunnel leads to the quantitative change of the greenhouse gas. This study tried to clarify the effect of the change of land use around Miryang Ice Valley on thermal environment of micro-meteorological scale by numerical experiment. We carried out several numerical experiment under different atmospheric conditions with different amount of greenhouse gases. Heating rate increased by the greenhouse gas in the ground level is average of 0.0073 K/day. And the increasing rate if smaller than the daily average heat crossing quantity.

• Asian Journal of Atmospheric Environment
• /
• 제2권1호
• /
• pp.1-13
• /
• 2008

A numerical simulation method has been developed to predict atmospheric flow and stack gas diffusion using a calculation domain of several km around a stack under complex terrain conditions containing buildings. The turbulence closure technique using a modified k-$\varepsilon$-type model under a non hydrostatic assumption was used for the flow calculation, and some of the calculation grids near the ground were treated as buildings using a terrain-following coordinate system. Stack gas diffusion was predicted using the Lagrangian particle model, that is, the stack gas was represented by the trajectories of released particles. The numerical model was applied separately to the flow and stack gas diffusion around a cubical building and to a two-dimensional ridge in this study, before being applied to an actual terrain containing buildings in our next study. The calculated flow and stack gas diffusion results were compared with those obtained by wind tunnel experiments, and the features of flow and stack gas diffusion, such as the increase in turbulent kinetic energy and the plume spreads of the stack gas behind the building and ridge, were reproduced by both calculations and wind tunnel experiments. Furthermore, the calculated profiles of the mean velocity, turbulent kinetic energy and concentration of the stack gas around the cubical building and the ridge showed good agreement with those of wind tunnel experiments.

• 한국대기환경학회지
• /
• 제17권2호
• /
• pp.223-231
• /
• 2001

In order to provide some insights into the influence of electric field, gas composition, and gas temperature on electron energy distribution and electron transport characteristics, the Boltzmann equation was solved by using cross section data for electron collisions, Critical electric fields for the corona development in dry air and flue gas are 150 and 80 Td, respectively. It was seen that the decrease of critical electric field in flue gas is mainly caused by the $H_2O$ addition through the comparison of ionization and attachment coefficients of gas components. Increase of $O_2$, $H_2O$, and $CO_2$ contents in gas affected discharge characteristics according to their reciprocal characteristics between lowering the ionization threshold and increasing the electro-negativity. As electric field increases, electrons with higher energies in the electron energy distribution also increase. The mean and characteristic electron energies also linearly increase with electric field. The variation of flue gas temperature did rarely affect on the electron energy distribution function and electron transport characteristics, because the gas temperature is several hundreds or thousands times lower than the electron temperature.

• Asian Journal of Atmospheric Environment
• /
• 제8권2호
• /
• pp.96-107
• /
• 2014

Extreme recovery of the thermal energy from the combustion of flue gas may bring about early gas condensation resulting in the increased formation of nitric acid vapor. The behavior of the nitric acid formed inside the stack and in the atmosphere was investigated through a computer-aided simulation in this study. Low temperatures led to high conversion rates of the nitrogen oxide to nitric acid, according to the Arrhenius relationship. Larger acid plumes could be formed with the cooled flue gas at $40^{\circ}C$ than the present exiting gas at $115^{\circ}C$. The acid vapor plume of 0.1 ppm extended to 25 m wide and 200 m high. The wind, which had a seasonal local average of 3 m/s, expanded the influencing area to 170 m along the ground level. Its tail stretched 50 m longer at $40^{\circ}C$ than at $115^{\circ}C$. The emission concentration of the acid vapor in the summer season was a little lower than in the winter. However, a warm atmosphere facilitated the Brownian motion of the discharged flue gas, finally leading to more vigorous dispersion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.327-331
• /
• 1997

As demand for various kinds and small lot products has been increasing, batch annealing has been appreciated for its small restiction for the opteration. The cold spot of the coil is very important in the BAF(Batch annealing furnace) annealing process. Because of the annealing cycle time in the BAF, annealing was decided on the cold spot of the coil. So, we tested the effect,variation of cold spot, for hydrogen contents of atmospheric gas at the annealing furnace. As a result of several investigations. We confirmed the following characteristics ; after the heating and soaking,the cold spot of coil moved to 1/3 of coil thickness in the NHx atmospheric gas, but the mid point of the coil thickness is the cold spot in the Ax or .H/sub2. atmospheric gas. Therefore, the use of hydrogen instead of nitrogen as the protective gas,combined with high convection in batch annealing furnaces, has shown that considerable increases in furnace output and material quality are attainable. Owing to the low density, high diffusion and reducing character of hydrogen, a better transfer resulting in uniform material temperatures and improved coil surfaces can be achieved.