• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.281-282
• /
• 2001

동북아 지역 특히 중국대륙의 경제발전에 따른 에너지 사용량 증가는 다량의 대기오염물질을 방출하고 있다. 한반도에 도달하는 황사현상에서 알 수 있듯이 대기오염물질은 장거리로 이동되어 인접국가의 환경 및 기후변화에 영향을 미친다. 대표적인 장거리이동 대기오염물질인 미세 입자를 포함하는 에어로졸의 물리적ㆍ화학적 성분 및 이동 경로파악은 매우 중요하다. 라이다를 사용하면 지상에서 60km까지의 대기에어로졸 연직분포의 실시간 측정이 가능하다. 본 연구는 ACE-Asia 프로그램 참여를 위해 다중채널 라이다 시스템을 제주도 고산 관측소에 설치하여 2001년 3월부터 운영 중에 있다. (중략)

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.225-230
• /
• 1998

The purpose of this study is to contribute the development of an El Nino prediction model. The objectives of the study are to (1) extract sea surface height data from the TOPEI/Poseidon altimeter, and (2) compare the relations among the sea surface height, sea surface temperature and wind field. NOAA AVHRR Multi-channel data is used for sea surface temperature and wind data is derived from ERS 1, 2 AMI wind scatterometer. The results showed that sea surface height has increased significantly during the El Nino season. The sea surface height is positively related to sea surface temperature and negatively related to zonal wind.

• Water Engineering Research
• /
• v.1 no.3
• /
• pp.243-256
• /
• 2000

This physically-based hydrologic model is developed to calculate the soil-moisture balance on paddy fields. This model consists of three modules; the first is the unsaturated module, the second is the rice evapotranspiration module with SPAC(soil-plant-atmospheric-continuum), and the third is the groundwater and open channel flows based upon the interrehtionship module. The model simulates the hydrlogical processes of infiltration, soil water storage, deep perocolation or echarge to the shallow water table, transpiration and evaporation from the soil surface and also the interrelationship of the groundwater and river flow exchange. To verify the applicability of the developed model, it was applied to the Kimjae Plains, located in the center of the Dongjin river basin in Korea, during the most serious drought season of 1994. The result shows that the estimated water net requirement was 757mm and the water deficit was about 5.9% in this area in 1994. This model can easily evaluate the irrigated water quantity and visualize the common crop demands and soil moisture conditions.

• 한국IT서비스학회:학술대회논문집
• /
• 2009.05a
• /
• pp.409-414
• /
• 2009

I have not seen each of the existing technology, RFID/USN technology combined with the wireless communication channel for the state of nuclear safety in real-time remote monitoring and operation system technology CARE existing radioactive accident information collected by the nuclear power and nuclear power status, 10-20 second intervals to monitor the safety network (SIDS), and nuclear power plants located on the site within 40 ㎞ radius around the 13~15 of the wind speed from the automatic weather network weather information such as rainfall and temperature every 10 minutes to collect as automatic weather network (REMDAS), Evaluation of atmospheric radiation and radiation of the bomb radiation impact assessment system to calculate the goodness (FADAS) and thicken the radiation-related information consists of real-time web technology to collect, the last robot on behalf of the human will to manage the nuclear power plant accident of the technology to prevent the concrete from the following narrative about to have.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.107-107
• /
• 1999

Direct-contact condensation experiments of atmospheric steam and steam/air mixture on subcooled water flowing co-currently in a rectangular channel are carried out uszng an infrared thermal camera system to develop a temperature measurement method. The inframetrics Model 760 Infrared Thermal Imaging Radiometer is used for the measurement of the temperature field of the water film for various flow conditions. The local heat transfer coefficient is calculated using the bulk temperature gradient along the (low direction. It is also found that the temperature profiles can be used to understand the interfacial condensation heat transfer characteristics according to the flow conditions such as noncondensable gas effects, inclination effect, and flow rates.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.384-389
• /
• 2009

Optical wireless communication (OWC) systems are rapidly gaining popularity as effective means of transferring data at high rates over short distances. OWC facilitates rapidly deployable, lightweight, high-capacity communication without licensing fees and tariffs. Nevertheless, the performance of this new technology depends strongly on the atmospheric conditions and the characteristics of the link. In this work, we study the influence of these parameters on both the average (ergodic) capacity and the outage capacity of an OWC system over moderate to strong turbulence channels modeled by gamma-gamma distribution. Moreover, we compare the results that we obtain estimating the average and outage capacities.

• Nuclear Engineering and Technology
• /
• v.36 no.1
• /
• pp.12-23
• /
• 2004

In the present study a new measurement technique has been developed, which uses an ultrasonic transmission signal in order to identify the vertical two phase flow pattern. The ultrasonic measurement system developed in the present study not only provides the information required for the identification of vertical two phase flow patterns but also makes real time identification possible. Various vertical two phase flow patterns such as bubbly, slug, churn, annular flow etc. have been accurately identified with the present ultrasonic measurement system under atmospheric condition. In addition, the present test apparatus can practically simulate the ultrasonic propagation characteristics under high temperature and high pressure systems. Therefore, it is expected that the present ultrasonic flow pattern identification technique could be applicable to the vertical two phase flow systems under high temperature and high pressure conditions.

• Wind and Structures
• /
• v.21 no.4
• /
• pp.425-442
• /
• 2015

This paper discusses the processing of the wind loads measured in wind tunnel tests by means of multi-channel pressure scanners, in order to compute the response of 3D structures to atmospheric turbulence in the time domain. Data compression and the resulting computational savings are still a challenge in industrial contexts due to the multiple trial configurations during the construction stages. The advantage and robustness of the bi-orthogonal decomposition (BOD) is demonstrated through an example, a sail glass of the Fondation Louis Vuitton, independently from any tentative physical interpretation of the spatio-temporal decomposition terms. We show however that the energy criterion for the BOD has to be more rigorous than commonly admitted. We find a level of 99.95 % to be necessary in order to recover the extreme values of the loads. Moreover, frequency limitations of wind tunnel experiments are sometimes encountered in passing from the scaled model to the full scale structure. These can be alleviated using a spectral extension of the temporal function terms of the BOD.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.555-568
• /
• 2013

Atmospheric optical thickness during nighttime was estimated in this study using analysis on the images of the moon taken from commercial digital camera. Basically the Langely Regression method was applied to the observations of the moon for the cloudless and optically stable sky conditions. The spectral response functions for the red(R), green(G), and blue(B) channels were employed to derive effective wavelength centers of each channel for the observations of the moon, and the correspondent Rayleigh optical thickness were also calculated. Aerosol optical thickness (AOT) was calculated by subtracting Rayleigh optical thickness from the atmospheric optical thickness derived from the Langley regression method. As there are only handful of nighttime AOT observations, the AOT from the moon observations was compared with the AOT from sun-photometers and the MODIS satellite sensor, which was taken several hours before the moon observations of this study. As a result, the values of AOT from moon observations agree with those from sun-photometers and MODIS within 0.1 for the R, G, B channels of the digital camera. On the other hand, ${\AA}$ngstr$\ddot{o}$m Exponent seems to be subject to larger errors due to its sensitiveness to the spectral errors of AOT. Nevertheless, the results of this study indicate that the method reported in this study is promising as it can provide nighttime AOT relatively easily with a low cost instrument like digital camera. More observations and analyses are warranted to attain improved nighttime AOT observations in the future.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1697-1707
• /
• 2021

On 19 February 2020, the 2nd Geostationary Ocean Color Imager (GOCI-II), a maritime sensor of GEO-KOMPSAT-2B, was launched. The GOCI-II instrument expands the scope of aerosol retrieval research with its improved performance compared to the former instrument (GOCI). In particular, the newly included UV band at 380 nm plays a significant role in improving the sensitivity of GOCI-II observations to the absorbing aerosols. In this study, we calculated the aerosol index and detected absorbing aerosols from January to June 2021 using GOCI-II 380 and 412 nm channels. Compared to the TROPOMI aerosol index, the GOCI-II aerosol index showed a positive bias, but the dust pixels still could be clearly distinguished from the cloud and clear pixels. The high GOCI-II aerosol index coincided with ground-based observations indicating dust aerosols were detected. We found that 70.5% of dust and 80% of moderately-absorbing fine aerosols detected from the ground had GOCI-II aerosol indices larger than the 75th percentile through the whole study period.