• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2445-2453
• /
• 2021

Since the nuclear data forms a vital component in reactor physics computations, the nuclear community needs processing codes as tools for translating the Evaluated Nuclear Data Files (ENDF) to simulate nuclear-related problems such as an ACE format that is used for MCNP. Errors, inaccuracies or discrepancies in library processing may lead to a calculation that disagrees with the experimentally measured benchmark. This paper provides an overview of the processing and preparation of ENDF/B-VIII.0 incident neutron data with NECP-Atlas and NJOY codes for implementation in the MCNP code. The resulting libraries are statistically inter-compared and tested by conducting benchmark calculations, as the mutualcomparison is a source of strong feedback for further improvements in processing procedures. The database of the benchmark experiments is based on a selection taken from the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP handbook) and those proposed by Russell D. Mosteller. In general, there is quite good agreement between the NECP-Atlas1.2 and NJOY21^(1.0.0.json) results with no substantial differences, if the correct input parameters are used.

• Journal of the Korean Society of Radiology
• /
• v.18 no.3
• /
• pp.213-222
• /
• 2024

This study analyzed the volumes generated by deep learning and atlas-based automatic segmentation methods, as well as the Dice similarity coefficient and 95% Hausdorff distance, according to the conditions of conduction voltage and conduction current in computed tomography for lung radiotherapy. The first result, the volumes generated by the atlas-based smart segmentation method showed the smallest volume change as a function of the change in tube voltage and tube current, while Aview RT ACS and OncoStudio using deep learning showed smaller volumes at tube currents lower than 100 mA. The second result, the Dice similarity coefficient, showed that Aview RT ACS was 2% higher than OncoStuido, and the 95% Hausdorff distance results also showed that Aview RT ACS analyzed an average of 0.2-0.5% higher than OncoStudio. However, the standard deviation of the respective results for tube current and tube voltage is lower for OncoStudio, which suggests that the results are consistent across volume variations. Therefore, caution should be exercised when using deep learning-based automatic segmentation programs at low perfusion voltages and low perfusion currents in CT imaging conditions for lung radiotherapy, and similar results were obtained with conventional atlas-based automatic segmentation programs at certain perfusion voltages and perfusion currents.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.13-21
• /
• 2009

National wind atlas of Korea requires effective database management because it has been constructed by 5-year long-term time-series numerical wind simulation. Therefore, database of the national wind map has been developed to increase data structure efficiency using IDL scientific programming language which has outstanding feature in mega-capacity numerical dataset. Visualization module also has been developed under IDL environment and it is anticipated to maximize post processing efficiency and applicability of the national wind map especially in the standing points of researchers and developers.

• 한국정보교육학회:학술대회논문집
• /
• 2010.08a
• /
• pp.221-226
• /
• 2010

Culture is like living organisms based on local and history. Therefore, we don't understand the whole phase of the culture if we neglect the information of the time and space. In this paper, we describe a preliminary study building of a 3D electronic cultural atlas about the national education center for Korean traditional music.

• Journal of Environmental Policy
• /
• v.13 no.4
• /
• pp.51-78
• /
• 2014

Unlike traditional environmental problems, current environmental problems occur due to by complex reasons. These complexities highlight the importance of precise spatial based analysis and expeditive use of environmental information when an environmental problem arises. However, the traditional environmental information has many problems because they are mainly numerical based and scattered in various systems. To overcome these problems, providing integrated environmental spatial information is important. Thus, a research was conducted on establishing national environment atlas system and its implications for policies. Firstly, this study selects 275 out of 2,701 materials and information from Ministry of Environment and related organizations. Secondly, total 64 thematic maps specific business support are Produced to support establishment and implementation of environmental policies. In addition, the produced thematic maps are privatized. Thirdly, the study analyzes total 17 systems and environmental thematic maps of Ministry of Environment and relevant organizations to connect the information on the business support thematic maps. As a result, 1,314 applicable spatial information and 39,331 applicable database based on spatial information based are selected, and a standardization plan is established. Fourthly, the study suggests a stepwise implementation plan for developing a national environment atlas system. The development of national environment atlas system will help establishing an environmental policy based on more relevant and accurale information.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.257-270
• /
• 2011

A set of reflood tests has been performed using ATLAS, which is a thermal-hydraulic integral effect test facility for the pressurized water reactors of APR1400 and OPR1000. Several important phenomena were observed during the ATLAS LBLOCA reflood tests, including core quenching, down-comer boiling, ECC bypass, and steam binding. The present paper discusses those four topics based on the LB-CL-11 test, which is a best-estimate simulation of the LBLOCA reflood phase for APR1400 using ATLAS. Both homogeneous bottom quenching and inhomogeneous top quenching were observed for a uniform radial power profile during the LB-CL-11 test. From the observation of the down-comer boiling phenomena during the LB-CL-11 test, it was found that the measured void fraction in the lower down-comer region was relatively smaller than that estimated from the RELAP5 code, which predicted an unrealistically higher void generation and magnified the downcomer boiling effect for APR1400. The direct ECC bypass was the dominant ECC bypass mechanism throughout the test even though sweep-out occurred during the earlier period. The ECC bypass fractions were between 0.2 and 0.6 during the later test period. The steam binding phenomena was observed, and its effect on the collapsed water levels of the core and down-comer was discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1381-1387
• /
• 2014

According to continuous development of information technology, it is needed to make convergence of other disciplines such as humanities and area studies. Among convergence fields related to information technology and humanities/area studies, electronic cultural atlas represents various digitalized cultural information on electronic map using spatial data such as points, lines, and polygons through time, spatial, and subject axises. Knowledge map is to represent special academic information based on electronic cultural atlas. In details, knowledge map can provide integrated information sharing and spread because academic information associated with electronic cultural atlas and data related to per subjects, regions, and period become organically connected. Therefore, knowledge map may be utilized to promote scholastic research and diffuse research result. In this paper, we describe basic concept and composition of knowledge map and propose design method to construct knowledge map.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.74-80
• /
• 2021

Korea Atomic Energy Research Institute (KAERI) has been operating an integral effects test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), according to APR1400 for transient experimental and design basis accident simulation. Moreover, based on the experimental data, the domestic standard problem (DSP) program has been conducted in Korea to validate system codes. Recently, through DSP-05, the performance of the passive auxiliary feedwater system (PAFS) in the event of multiple steam generator tube rupture (MSGTR) has been analyzed. However, some errors exist in the reference input model distributed for DSP-05. Furthermore, the calculation results of the heat loss correlation for the secondary system presented in the technical report of the reference indicate that a large difference is present in heat loss from the target value. Thus, in this study, the reference model is corrected using the geometric information from the design report and drawings of ATLAS. Additionally, a new heat loss correlation is suggested by fitting the results of the heat loss tests. Herein, MSGTR-PAFS accident analysis is performed using MARS-KS 1.5 with the improved model. The steady-state calculation results do not significantly differ from the experimental values, and the overall physical behavior of the transient state is properly predicted. Particularly, the predicted operating time of PAFS is similar to the experimental results obtained by the modified model. Furthermore, the operating time of PAFS varies according to the heat loss of the secondary system, and the sensitivity analysis results for the heat loss of the secondary system are presented.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.1
• /
• pp.8-14
• /
• 1993

To investigate selection efficiency for protein content and hardness in a wheat breeding program, two crosses were made between soft wheat (SW) ‘Chokwang’ and hard wheat (HW) ‘Lancota’, and between HW ‘Suwon 210’ and SW ‘Atlas 66’. F2 progeny lines from the crosses were separated into 4 groups as HW + high protein (HP), HW + low protein (LP), SW + HP and SW + LP by measuring protein content and sedimentation value in F4 generation. The subsequent populations were tested for protein content, sedimentation value, mixogram pattern and bread quality. HP group selected from F4 again had a higher protein content in F5 generation than LP group, but there was no significant difference between two groups in F6 generation. In sedimentation value, the significant difference was recognizable only between the groups of HW + HP and. SW + LP. Plant based investigation in F6 revealed that the distribution pattern for protein content and sedimentation value shifted from the low to high by the four groups with the order of SW + LP, HW + LP, SW + HP, HW + HP. Such a trend was most noticeable in the progenies of the cross between ‘Suwon 210’ and ‘Atlas 66’. Mixogram pattern that shows flour characteristics differed greatly among the groups, indicating a high selection efficiency for the traits. Bread volume in F6 of HW + HP was found to be higher than that of SW + LP, only from the cross between ‘Suwon 210’ and ‘Atlas 66’.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.199-210
• /
• 1998

In this paper, we present a 3D reconstruction method of color volume data for a computerized human atlas. Binary volume rendering which takes the advantages of object-order ray traversal and run-length encoding visualizes 3D organs at an interactive speed in a general PC without the help of specific hardwares. This rendering method improves the rendering speed by simplifying the determination of the pixel value of an intermediate depth image and applying newly developed normal vector calculation method. Moreover, we describe the 3D boundary encoding that reduces the involved data considerably without the penalty of image quality. The interactive speed of the binary rendering and the storage efficiency of 3D boundary encoding will accelerate the development of the PC-based human atlas.