• 한국가축번식학회지
• /
• 제7권1호
• /
• pp.41-51
• /
• 1983

The purpose of this experiment was to investigate the effects of adrenalectomy and PMSG treatment on reproductive organs and serum steroid hormone level in immature female rats. The animals used in this experiment were 25 days old female rats weighing a, pp.oximately 70g. They were randomly divided into two groups of intact rat group (Int-) and adrenalectomized rat group (Adx-) and each group were subdivided into two groups of Non-PMSG (-Cont) and PMSG treated (-PMSG) group. The rat of PMSG-treated group (-PMSG) was administered subcutaneously with 25 IU PMSG on first day (9 a.m.) after adrenalectomy. The adrenalectomized rat groups were su, pp.ied with saline solution through the experiment period. The rate of ovulation and vaginal opening and reproductive organ weights were observed at 8, 32, 56, 80 and 104 hours after PMSG treatment. At the same time, the serum level of estradiol-17${\beta}$ and progesterone were measured by the radioimmunoassay. The results obtained were as follows: 1. Ovulation was shown at 56 hours after treatment in Int-PMSG group and Adx-PMSG group and Adx-PMSG group. The rate of ovulation was very low in PMSG-treated groups, but it was increased in 80 to 90% at 104 hours after treatment. However, there was no ovulation in Int-Cont group and Adx-Cont group. 2. Vaginal opening was shown at 56 hours after treatment in Int-PMSG group and Adx-PMSG group and a, pp.ared in 80% at 104 hours after treatment. The rate of vaginal opening in PMSG-treated groups was very low, but Int-Cont group and Adx-Cont group had no vaginal opening. 3. The weight of ovary and uterus in two PMSG-treated groups were increased with the elapse of time after treatment and were significantly heavy in all observation time, but changes in Int-Cont group and Adx-Cont group were not recognized. The weights of ovaries and utera in Adx-Cont group were increased with the elapse of time. 4. The level of serum estradiol-17${\beta}$ was remarkably increased in PMSG-treated groups (Int-PMSG and Adx-PMSG groups) compared with Int-Cont and Adx-Cont group, and significant difference was recognized between Non-PMSG group and PMSG-treated group in the experimental period. Especially, the highest levels of Int-PMSG groups and Adx-PMSG groups were shown at 80 and 56 hours after treatment and after ward estradiol-17${\beta}$ levels of PMSG-treated groups were decreased. However, changes of the levels did not a, pp.ared in Non-PMSG groups at 104 hours after treatment. 5. The level of serum progesterone in PMSG-treated groups was significantly increased between 80 and 104 hours after treatment. With the elapse of time, the level was increased in all observed groups except for Int-Cont and Adx-Conx group. And the order from the highest level at 104 hours after treatment was Int-PMSG, Adx-PMSG, Int-Cont and Adx-Cont group.

• ETRI Journal
• /
• 제21권3호
• /
• pp.16-21
• /
• 1999

After etching Al-Cu alloy films using SiCl4/Cl_2/He/CHF3 mixed gas plasma, the corrosion phenomenon at the grain boundary of the etched surface and a passivation layer on the etched surface with an SF6 plasma treatment subsequent to the etching were studied. In Al-Cu alloy system, corrosion occurs rapidly on the etched surface by residual chlorine atoms, and it occurs dominantly at the grain boundaries rather than the crystalline surfaces. To prevent corrosion, the SF6 gas plasma treatment subsequent to etching was carried out. The passivation layer is composed of fluorine-related compounds on the etched Al-Cu surface after the SF6 treatment, and it suppresses effectively corrosion on the surface as the SF6 treatment pressure increases. Corrosion could be suppressed successfully with the SF6 treatment at a total pressure of 300 mTorr. To investigate the reason why corrosion could be suppressed with the SF6 treatment, behaviors of chlorine and fluorine were studied by various analysis techniques. It was also found that the residual chlorine incorporated at the grain boundary of the etched surface accelerated corrosion and could not be removed after the SF6 plasma treatment.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.505-508
• /
• 2001

An microorganism able to degrade ethylene glycol(EG) was developed. Using this microorganism, biological treatment of ethylene glycol was studied in Erlenmeyer flasks and a laboratory scale stirred loop bioreactor. The removal efficiencies of ethylene glycol from synthetic wastewater were 91.6% ${\sim}$ 97.7% at $30^{\circ}C$ ${\sim}$ $40^{\circ}C$, and 96.3% ${\sim}$ 97.9% at initial pH 9 ${\sim}$ 11 respectively. Also the removal efficiencies of ethylene glycol were found to be more then 92% at initial ethylene glycol concentration of 300mg/L ${\sim}$ I400mg/L. In treatment of weight loss treatment wastewater using Erlenmeyer flasks, the removal efficiencies of ethylene glycol were 79.6%. 82.5%. 77.6%. and 71.3% at initial pH 9. 10. 11. and 12.4 after 11 days of reaction. Moreover in treatment of complex dyeing process wastewater. the residual ethylene glycol was not detected at the initial pH 10.0 and pH 11.3 after 4 days of reaction. When stirred loop bioreactor was used for removing ethylene glycol, the residual ethylene glycol was not detected after 108 hrs and 60 hrs of reaction in batch treatment of weight loss treatment wastewater and complex dyeing process wastewater.

• 한국식품저장유통학회지
• /
• 제5권1호
• /
• pp.73-80
• /
• 1998

Shelf-life of soybean curd prepared with ozone-treated soybeans investigated on pH, acidity, sour taste, slime formation during storage at 3$0^{\circ}C$. Total Plate counts of raw soybeans showed about log 7.0 CFU/g before ozone treatment. The sterilization efficiency of raw soybeans showed the most effective in 0.5ppm of aqueous ozone treatment at 4$^{\circ}C$ for 90 minutes. Raw soybeans were treated with ozone by different methods; (1) Ozone treatment for 90 + 90 minutes (first 3.5~5 hours and later 8.5~10 hours) of 10 hours during soaking in aqueous solutions at 4$^{\circ}C$ (OW). (2) Ozone treatment by exposure first to 30ppm of gaseous ozone for 90 minutes and then allied to OW method (GO+OW). The log reduction of raw soybeans treated by OW and GO+OW methods showed 3.72 and 4.15, respectively. Soybean curd prepared with OW and GO+OW-treated soybeans kept the shelf-life of 4 and 5.5 days at 3$0^{\circ}C$, respectively, but, that without ozone treatment spoiled at me day.

• Asian-Australasian Journal of Animal Sciences
• /
• 제8권6호
• /
• pp.563-566
• /
• 1995

To improve the nutritive value of wheat straw it as treated with 0, 3, 4 and 5 percent levels of urea, 0 and 4 percent level of alkali at 40, 50 and 60 percent moisture levels and stored at room temperature. Total nitrogen contents of the straw increased significantly, from 0.77 percent with no urea treatment to 0.87, 1.16 and 1.19 percent with 3, 4 and 5 percent urea levels, respectively. Percent retention of nitrogen was 63.73 percent. Alkali treatment at 4 percent level, lowered significantly the crude fibre contents of the straw from 41.86 percent in control to 40.21 percent in the treated straw. Moisture level of 40 percent significantly lowered (p < 0.05) the crude fibre contents. Total ash content of straw increased significantly by urea and alkali treatment. Alkali treatment improved significantly the sodium contents also. The results of the study indicated that most beneficial results were obtained with 4 percent urea, 4 percent alkali at 50 percent moisture level.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1163-1164
• /
• 2006

TZM alloy having elongated coarse-grain structure was developed by three-step internal nitriding treatment at 1423 to 1873 K in $N_2$ and subsequent recrystallization treatment at 2173 K in vacuum. Some specimens were subjected to re-nitriding treatment at 1873 K for 16 h. After the recrystallization treatment, aspect ratio (L/W) of grains for rolling direction was about 50 at the maximum. Yield stress obtained at 1773 K after re-nitriding treatment was about 6 times as large as that of recrystallized specimen. Re-nitriding was very effective in the improvement in strength of TZM alloy having elongated coarse-grain structure.

• 소성∙가공
• /
• 제30권1호
• /
• pp.43-48
• /
• 2021

The success of warm forming of Mg alloy sheet is greatly influenced by friction at elevated temperature, depending on the surface treatment of the tool. The tool coating affected the frictional characteristics of AZ31B Mg alloy sheet at elevated and room temperatures. The frictional behavior of the Mg alloy sheet at room temperature was not significantly affected by surface treatment conditions of the tool, but was significantly affected at elevated temperature. When the contact pressure is high, a few surface-treated tools exhibit a higher coefficient of friction than those without surface treatment. It is important to select the surface treatment conditions of the tool in order to ensure appropriate friction during warm forming of Mg alloy sheet.

• 한국자원식물학회지
• /
• 제25권4호
• /
• pp.482-489
• /
• 2012

부화 초기의 육계 병아리에게 천화분추출물을 급여한 후, LPS 처리에 의한 염증유도로 천화분추출물이 염증반응에 미치는 영향을 검토했다. 각 처리군 별 혈장 ceruloplasmin 및 ${\alpha}$-산성단백 농도의 경시적 변동경향은 전 처리군 동일하게 LPS 처리 후 증가하였다. 그러나 각 처리군 별 농도는 LPS 처리 후 3h, 9h 및 24h째 모두에서 천화분 추출물의 첨가량이 증가함에 따라 감소하는 경향을 보였다. 혈장 일산화질소 농도는 전 처리군 모두가 LPS 처리 후, 3h째에 급격하게 증가하였다. 각 처리군 별 수치는 LPS 처리 후, 3h 및 9h째 모두에서 천화분 추출물의 첨가량이 증가함에 따라 하락했다. LPS 처리 후, 간장 내의 IL-2 mRNA량은 모든 처리군들이 동일하게 2h째에 급격한 증가 현상을 보였다가, 그 후 점진적으로 하락하여 9h째에는 LPS처리 전 수준으로 회복했다. 각 처리군 별 경시적 변동 경향은 LPS 처리 후, 2h, 3h 및 4h째에서 천화분 첨가군 모두가 대조군보다 낮은 값을 보였다. LPS 처리 후, 비장 내의 IL-2 mRNA 량은 모든 처리군 들이 4h째에서 가장 높은 수치를 보였다. 처리군 별 변동 값은 천화분 0.2% 및 0.3%첨가군들이 LPS 처리 후, 3h 및 4h에서 대조군과 0.1% 천화분 첨가군들보다 높은 수치를 나타내었다. LPS 처리 후, 간장 및 비장내의 IFN-${\gamma}$ mRNA량은 모든 처리군들이 LPS 처리 후, 2h 및 3h째까지 증가하였으나, 4h에서 하락하여, 9h째에서는 LPS 처리 전 수준으로 하락했다. 그러나 각 처리군별 경시적 변동치는 최고치를 나타낸 LPS 처리 후 2h 및 3h에서, 천화분 추출물 첨가량이 증가함에 따라 하락하였다. LPS 처리 후, 간장 및 비장 내의 iNOS mRNA량은 전 처리군이 3h째에서 가장 높은 수치를 나타내었으며, 9h째에서 LPS 처리 전 수준으로 회복되었다. 처리군별 2h째, 3h째 및 4h째의 수치는 천화분 추출물 첨가군이 대조군보다 낮은 수치를 나타내었다.

• 한국물환경학회지
• /
• 제25권2호
• /
• pp.268-280
• /
• 2009

Oncheon basin which are located in Busan is divided into 43 basin on the basis of main pipe, constructed with Storm Water Management Model (SWMM). Occurrence situation for Outflow and pollutant loads by long-term continuous rainfall is examined for treatment district and river analysis point of Oncheon basin and a reduction vs effectiveness table for effective CSOs managements is made for each of treatment districts according to each of managements. In case that treatment equipment is located at the discharge point of CSO, treatment efficiency is analysed. It is supposed that treatment equipment have an efficiency on the basis of a concentration and runoff discharge over a critical flow is discharged with it untreated and treating runoff discharge with treatment equipment at each of runoff discharge points and treating it gathered at sewage treatment plant (STP) through trunk sewer is compared for a relative treatment efficiency.

• 열처리공학회지
• /
• 제33권6호
• /
• pp.277-283
• /
• 2020

Cu-Co-Si based alloy has a strengthening mechanism for Co₂Si intermetallic compounds deposited on the copper matrix after aging treatment and the solution treatment has a key influence on the strength and electrical conductivity of the final products. In this paper, the Cu-1.6%Co-0.38%Si alloy was fixed at the time and the solution treatment temperature was set at a temperature in the range of 800 to 950℃, and the change in mechanical properties was observed by fixing the temperature at 950℃ and changing the time. The microstructure was observed using an electron microscope and an optical microscope, and the changes in hardness, electrical conductivity, and bending workability after aging treatment were investigated. When the solution treatment time is less than 20 seconds, the solution treatment is not sufficient and the formation of precipitates contributing to the increase in hardness decreases and the hardness decreases after the aging treatment, and in more than 50 seconds, the hardness decreases due to the coarsening of the grains and the bending workability got worse.