• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.11
• /
• pp.873-880
• /
• 2020

In this paper, we propose a guidance filter to estimate line of sight rate with strapdown seeker measurements and INS(Inertial Navigation System) information. The measurements of proposed guidance filter consisted of the LOS(Line of Sight) and relative position that can be calculated with the seeker's measurements, INS information and known target position, also the filter is based on an asynchronous filter to use outputs of the two sensors that are out of synchronous and period. Through the proposed filter, we can reduce the effect on parasitic loop that can be caused by using large time delay seeker and improve the estimation performance.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.884-887
• /
• 2023

Recently, research has been actively conducted to overcome the limitations of high-priced single sensors and reduce costs through the convergence of low-cost multi-variable sensors. This paper estimates state variables through asynchronous Kalman filters constructed using CVXPY and uses Cvxpylayers to compare and learn state variables estimated from CVXPY with true value data to estimate filter parameters of low-cost sensors fusion.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.66-72
• /
• 2014

This paper introduces an asynchronous multiple radar fusion algorithm for space object tracking. To estimate orbital motion of space object, a multiple radar scenario which jointly measures single object with different sampling time indices is described. STK/ODTK is utilized to determine realization of orbital motion and joint coverage of multiple radars. Then, asynchronous fusion algorithm is adapted to enhance the estimation performance of orbital motion during which multiple radars measure the same time instances. Monte-Carlo simulation results demonstrate that the proposed asynchronous multi-sensor fusion scheme better than single linearized Kalman filter in an aspect of root mean square error.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1198-1206
• /
• 2011

In this paper, a sensor bias estimation method with pseudo measurement for asynchronous multisensor systems is proposed. The proposed bias estimation method separates the local filter which estimates the target state with biased measurements into two parts, one is bias part, the other is target state part. By using these two parts, the algorithm generates the pseudo bias measurement for estimating bias, and then eliminates bias of local track through bias compensation. Finally, the proposed algorithm is evaluated by comparing with the existing EXX method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.527-539
• /
• 2009

In this paper, we propose an asynchonous ICI (Inter-Cell Interference) mitigation techniques for 3GPP LTE MIMO-OFDMA down-link receiver. An increasing in symbol timing misalignments may occur relative to sychronous network as the result of BS (Base Station) timing differences. Such symbol synchronization errors that exceed the guard interval or the cyclic prefix duration may result in MAI (Multiple Access Interference) for other carriers. In particular, at the cell boundary, this MAI becomes a critical factor, leading to degraded channel throughput and severe asynchronous ICI. Hence, many researchers have investigated the interference mitigation method in the presence of asynchronous ICI and it appears that the knowledge of the SCM (Spatial Covariance Matrix) of the asynchronous ICI plus background noise is an important issue. Generally, it is assumed that the SCM estimated by using training symbols. However, it is difficult to measure the interference statistics for a long time and training symbol is also not appropriate for MIMO-OFDMA system such as LTE. Therefore, a noise reduction method is required to improve the estimation accuracy. Although the conventional time-domain low-pass type weighting method can be effective for noise reduction, it causes significant estimation error due to the spectral leakage in practical OFDM system. Therefore, we propose a time-domain sinc type weighing method which can not only reduce the noise effectively minimizing estimation error caused by the spectral leakage but also implement frequency-domain moving average filter easily. By using computer simulation, we show that the proposed method can provide up to 3dB SIR gain compared with the conventional method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.335-343
• /
• 2012

This paper presents an target tracking algorithm for fusion of radar and infrared(IR) sensor measurement data. Generally, fusion methods with Kalman filter assume that processing data obtained by radar and IR sensor are synchronized. It has much limitation to apply the fusion methods to real systems. A key point which is taken into account in the proposed algorithm is the fact that two asynchronous dissimilar data are fused by compensating the time difference of the measurements using radar's ranges and track state vectors. The proposed fusion algorithm in the paper is evaluated via a computer simulation with the existing track fusion and measurement fusion methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.347-354
• /
• 2011

This paper presents a time-domain based asynchronous IR-UWB ranging system. This system accomplishes the ranging by detecting peaks from the outputs of a correlator implemented by a FIR filter. To discriminate the peaks due to a signal component, we use windowing for the correlated data within which the data are sorted in amplitude-ascending order and the noise level is calculated. Comparing with the recently presented frequency-domain based ranging system, we show the system structure and explain how it operates for ranging. Moreover, through the simulations, the proposed system is compared with the frequency-domain based system in terms of performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.14-23
• /
• 2005

In this paper we propose a sensor fusion method for the navigation algorithm which can be used to estimate state vectors such as position and velocity for its motion control using multi-sensor output measurements. The output measurement we will use in estimating the state is a series of known multi-sensor asynchronous outputs with measurement noise. This paper investigates the Extended Kalman Filtering method to merge asynchronous heading, heading rate, velocity of DVL, and SSBL information to produce a single state vector. Different complexity of Kalman Filter, with. biases and measurement noise, are investigated with theoretically data from MOERI's SAUV. All levels of complexity of the Kalman Filters are shown to be much more close and smooth to real trajectories then the basic underwater acoustic navigation system commonly used aboard underwater vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.175-175
• /
• 2000

In this Paper we propose a navigation algorithm which can be used to estimate state vectors such as position and velocity for its motion control using multi-sensor output measurements. The output measurement we will use in estimating the state is a series of known multi-sensor asynchronous outputs with measurement noise. This paper investigates the Extended Kalman Filtering method to merge asynchronous heading, heading rate, velocity of DVL, and SSBL information to produce a single state vector. Different complexity of Kalman Filter, with biases and measurement noise, are investigated with theoretically data from KRISO's AUV. All levels of complexity of the Kalman Filters are shown to be much more close and smooth to real trajectories then the basic underwater acoustic navigation system comment)'used aboard underwater vehicle.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1551-1558
• /
• 2014

We propose a multi-rate sensor fusion of vision and radar using Kalman filter to solve problems of asynchronized and multi-rate sampling periods in object vehicle tracking. A model based prediction of object vehicles is performed with a decentralized multi-rate Kalman filter for each sensor (vision and radar sensors.) To obtain the improvement in the performance of position prediction, different weighting is applied to each sensor's predicted object position from the multi-rate Kalman filter. The proposed method can provide estimated position of the object vehicles at every sampling time of ECU. The Mahalanobis distance is used to make correspondence among the measured and predicted objects. Through the experimental results, we validate that the post-processed fusion data give us improved tracking performance. The proposed method obtained two times improvement in the object tracking performance compared to single sensor method (camera or radar sensor) in the view point of roots mean square error.