• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.590-593
• /
• 2005

In this paper, it is analyzed a transmission time of ACL Packet in bluetooth wireless link. In order for segment to improve the transfer capability in bluetooth system, it is fragmented in TCP total messages that are coming down from upper layer and then the packets are sent one at time in baseband. And it is studied that transmission time for bluetooth wireless link according to DM1, DM3 or DM5 packet type in bluetooth piconet environment. From the results, we were able to obtain ACL packet transmission time, optimal TCP packet size and DM packet size.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1780-1786
• /
• 2005

The phase error generated in the transmission system affects the performance of digital transmission signal. The phase error are generated by random phase noise and tracking phase error due to denier phenomenon. In the mobile satellite communication system that generates the doppler frequency, which is a system with a movement, the proper system phase noise spectrum should be designed based on analyses for phase noise and static phase error effects. Based on the analyses of the doppler frequency and the phase error for bilateral satellite communication system providing an asynchronous service, the phase noise spectrums for the mobile satellite communication are designed in this paper. Also, the available transmission services under the less doppler effect are proposed and the proper signal source units for a required transmission system can be designed under the proposed system phase noise spectrum.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.99-123
• /
• 1997

Performance analysis of NTT/BT protocol is investigated, which is a GFC (Generic Flow Control) ptotocol in ATM (Asynchronous Transfer Mode ) network and is based on cyclic reset mechanism. THe mean cell delay time is proposed as a performance measure of NTT/BT protocol. The mean cell delay time is defined as the duration from the instant the cell arrives at the transmission buffer until the cell is fully transmitted. The process of cell transmission can be described as a single server queueing modle with two dependent services. By utilizing this model, mean cell delay time is obtained and sensitivity of the factors such as window size and reset period is also analysed.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.192-194
• /
• 2005

Acceptance of the international standards for video compression, such as H.261, MPEG-1 and MPEG-2, along with the developments in video codec hardware, has created an explosion of application. Among these, the long time quest for long-distance digital video transmission causes an increasing interest in transporting compressed video over networks which are nontraditional for this purpose, including asynchronous transfer mode networks, the Internet, and cellular and wireless channels. Transmission of compression video over packet network is improved for error resilience. And layered video coding techniques improves error resilience. We present a efficient method of scalable video coding for low bandwidth.

• ETRI Journal
• /
• v.26 no.2
• /
• pp.149-160
• /
• 2004

In this paper, we present an interactive data broadcasting system compliant with the Advanced Television Systems Committee (ATSC) standards. The proposed system provides users not only with various data broadcasting services but also remote interactive services. For various data broadcasting services, we have adopted a synchronized data injector that calculates the transmission time of synchronized data accurately and multiplexes synchronized data with the data of an MPEG-2 audio-visual program according to the calculated transmission time. To support remote interactive services, we designed and implemented a return channel server connected on a bi-directional interaction channel. Test results show that the proposed system provides both an asynchronous and synchronized data broadcasting service and remote interactive service appropriately.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.307-312
• /
• 2000

Asynchronous transfer mode(ATM) is flexible to support the various multimedia communication services such as data, voice, and image by applying asynchronous time-sharing and statistical multiplexing techniques to the existing data communication. ATM service is categorized to CBR, VBR, UBR, and ABR according to characteristics of the traffic and a required service qualities. Among them, ABR service guarantees a minimal bandwidth and can transmit cells at a maximum transmission rate within the available bandwidth. To minimize the cell losses in transmission and switching, a feedback information in ATM network is used to control the traffic. In this paper, predictive control algorithms are proposed for the feedback information. When the feedback information takes a long propagation delay to the backward nodes, ATM switch can experience a congestion situation from the queue length increases, and a high queue length fluctuations in time. The control algorithms proposed in this paper provides predictive control model using slop changes of the queue length function and previous data of the queue lengths. Simulation shows the effectiveness result of the proposed control algorithms.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.196-201
• /
• 2013

In this paper, we propose an asynchronous and adaptive message passing scheme based on S-MAC for handling with the problem on energy efficiency in wireless sensor networks. The proposed scheme consists of a policy that differentiate transmission errors caused by packet collision or radio interference from congestion errors caused by buffer overflow and a method that adaptively controls the size of a fragment according to the variance of traffic loads. Especially, it presents a method that highly reduce the energy consumption by keeping the size of fragment not being excessively smaller than the one that may result in rapid increment of the total transfer time. Finally, with the simulation results we show that network throughput and delay are improved by using the proposed message passing scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.664-673
• /
• 2014

This paper analyzes the power allocation scheme to maximize the sum-rate for heterogeneous networks based on asynchronous time division duplex. We consider heterogeneous networks where a small cell exists in the macro cell coverage and the small cell and the macro cell share the same time-frequency resources. We formulate the optimization problem which maximizes the sum-rate of the heterogeneous network subject to the target signal-to-interference-plus-noise ratio. We analyze the feasible region in order for the optimal solution to exists and the optimal power allocation scheme for maximizing the sum-rate. Simulation results show that the proposed power allocation schemes outperform the maximum power transmission scheme.

• Korean Journal of Optics and Photonics
• /
• v.19 no.5
• /
• pp.370-375
• /
• 2008

High-speed high-resolution terahertz time-domain spectroscopy (THz-TDS) is demonstrated using the asynchronous-opticalsampling (AOS) method. A time-domain signal with a 10-ns time window is rapidly acquired by using two femtosecond lasers with slightly different repetition frequencies to generate and detect a terahertz pulse wave, without a mechanical delay stage. The spectrum obtained by the fast Fourier transformation (FFT) of the time-domain waveform has a frequency resolution of 100 MHz. The time resolution of our spectrometer is measured using the cross-correlation method to be 278 fs. A transmission spectrum of water vapor is measured and the absorption lines are analyzed in the frequency range from 0.1 to 1.2 THz.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.34-40
• /
• 1992

This paper shows a new relational formula of multiplexing gain versus variable input bit rates useful for designing Nx1 ATM(Asynchronous Transfer Mode) multiplexer which mixes several asynchronous bit streams with different transmission rates. The relation between multiplexing gain and input bit stream speeds is derived from the occupied mean lenght(the width per unit time) of cells and the occupation probability of the number of cells at an arbitrary instant when the rates of the periodic cell strams change randomly. And the relation between multiplexing gain and variable bit rates from different number of input bit streams is analyzed accordingly. Under the condition of unlimited multiplexing speed, the more number of input bit streams increases, the bigger the multiplexing gain becomes. While for the case which restricts the multiplexing speed to a limited value, the multiplexing gain becomes smaller contrarily as the number of input bit streams continues too invrease beyond a boundary value. It is shown that for designing an ATM multiplexer according to the latter case, the combination of input bit streams should be determined such as its total bit rate is lower thean, but most apprpaximate to, the multiplexed output speed. Also the general formula evaluating the most significant parameters which should be needed to design the multiplexer is derived.