• 제목/요약/키워드: Asymmetric ratio

검색결과 315건 처리시간 0.031초

디지털전치왜곡 기반 고효율 전력증폭기 설계 (High Efficiency Power Amplifier Based on Digital Pre-Distortion)

  • 권기대;윤원식
    • 한국정보통신학회논문지
    • /
    • 제18권8호
    • /
    • pp.1847-1853
    • /
    • 2014
  • 이동통신 시스템의 OFDMA 방식은 신호에 대한 PAPR(Peak to Average Power Ratio) 값의 증가를 가져왔다. 이동통신 시스템 전력 소모의 대부분을 차지하는 전력 증폭기에 대한 효율 개선은 매우 중요한 핵심 기술이다. 전력 증폭기의 선형 특성 개선을 위해 디지털전치왜곡 기술을 사용하였으며, 전력 증폭기의 효율 개선을 위해 비대칭 도허티(Asymmetric Doherty) 방식을 사용하였다. 본 논문에서는 기존 비대칭 도허티 구조와 다른 새로운 구조의 비대칭 도허티 구조를 제안하였다. 제안하는 새로운 구조의 비대칭 도허티 방식에서는 전력 증폭기 구동단을 주경로와 첨두경로로 분리하였으며, 위상 변환기를 이용하여 도허티 증폭기의 전력 결합 특성을 개선하였다. 또한 구동단 첨두 증폭기 gate bais에 대한 포락선 추적 기술을 적용하여 효율을 개선하였다.

승마 속보 시 등자 길이에 따른 체간기울기와 양측 하지의 협응성 비교분석 : 비대칭 지수 및 전체이동지수 알고리즘 개발 (Analysis of the Coordination of the Trunk Tilting Angle and Bilateral Lower Limbs According to the Stirrups Length during Trot in Equestrian: Asymmetric Index Development of Overall Movement Index Algorithm)

  • 현승현;류재청
    • 한국운동역학회지
    • /
    • 제25권1호
    • /
    • pp.131-140
    • /
    • 2015
  • Purpose : The purpose of this study was to analyze the coordination of the trunk tilting angle and bilateral lower limbs according to the stirrups length during trot in equestrian. Methods : Participants selected as subject were consisted of adult male(n=7, mean age: $45.00{\pm}3.78yrs$, mean height: $172.50{\pm}2.44cm$, mean body mass: $76.95{\pm}4.40kg$, mean, mean leg length: $97.30{\pm}2.60cm$). They were divided into 3-types of stirrups lengths(67 cm, 72 cm, 77 cm) during trot. The variables analyzed were consisted of the trunk front-rear angle, lower limb joint(Right Left hip, knee, ankle), overall movement index(OMI) of the lower limbs(thigh, shank, foot) and asymmetry index(AI%) during trot. Results : The average angle in hip and knee joint showed more extended posture according to the increase of stirrups lengths and ankle angle showed more plantarflexion posture according to increase of stirrups length during 1 stride in trot. Also, average angle showed more extended posture in right hip and ankle joint than that of left. The angle of knee joint didn't show significant difference statistically between right and left. Also asymmetric index in average angle of hip, knee and ankle joint didn't show significant difference statistically in between lower limbs, but hip joint showed higher asymmetric index in stirrup length of 77 cm and ankle joint showed higher asymmetric index in stirrup length of 67 cm than that of the others respectively. The FR angle in trunk of horse-rider showed relative backward leaning motions at stirrup length of 67 cm and 77 cm than that of stirrup length of 72 cm during stance and swing phase. OMI in thigh, shank, and foot limbs didn't show significant difference statistically according to the stirrups length of right and left lower limbs, but left lower limbs showed higher index than that of right lower limb. Stirrup length of 72 cm in shank and foot limbs showed higher index than that of stirrup length of 67 cm and 77 cm. But stirrup length of 72 cm showed higher asymmetric index than that of stirrups length of 67 cm and 77 cm. Conclusions : When considering the above, 72 cm(ratio of lower limb 74.04%) stirrup lengths could be useful in posture correction and stabilization than 67cm(ratio of lower limb 68.69%) and 77 cm(ratio of lower limb 79.18%) stirrup lengths during trot in horse back riding.

모듈러 골조용 비대칭 기둥-보 접합부에 대한 거동 평가 (Behavior Evaluation on the Non-symmetric Composite Column for Unit Modular Frames)

  • 박금성;이상섭;배규웅;문지호
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권1호
    • /
    • pp.36-44
    • /
    • 2019
  • 본 연구의 목적은 강 - PC 복합모듈 골조를 구성하는 프레스 성형된 비대칭 기둥과 보 접합부의 구조적 성능을 평가하는 것이다. 모듈러 골조를 구성하는 대부분의 접합부는 폐쇄형의 사각형 강재 기둥 단면을 주로 사용한다. 폐쇄형의 기둥 단면을 사용한 기둥-보 접합부는 시공성을 감소시키고 내화성을 확보하는데 어려움이 있다. 이러한 단점을 극복하기 위하여 강판을 프레스로 성형하여 비대칭 개방형 단면 내에 콘크리트를 충진하는 것이다. 프레스 성형된 비대칭 기둥-보 접합부의 구조적 성능을 조사하기 위해 총 4개의 실험체를 제작하였다. 실험결과, 비대칭 기둥의 구조적 성능과 거동이 비대칭 기둥 단면이 합성되는지 또는 기둥의 폭-두께 비율에 따라 달라지는지를 보여주었다. 프레스 성형된 비대칭 기둥-보 접합부의 구조적 성능은 실험결과와 이론식을 비교하여 평가하였다.

Relationship between plasma asymmetric dimethylarginine and nitric oxide levels afects aerobic exercise training-induced reduction of arterial stifness in middle-aged and older adults

  • Shimomura, Mio;Fujie, Shumpei;Sanada, Kiyoshi;Kajimoto, Hiroki;Hamaoka, Takafumi;Iemitsu, Motoyuki
    • 운동영양학회지
    • /
    • 제25권1호
    • /
    • pp.16-22
    • /
    • 2021
  • [Purpose] Aerobic exercise training (AT) reverses aging-induced deterioration of arterial stiffness via increased arterial nitric oxide (NO) production. Asymmetric dimethylarginine (ADMA), an endogenous inhibitor of NO synthase, was decreased by AT. However, whether AT-induced changes in ADMA levels are related to changes in nitrite/nitrate (NOx) levels remains unclear. Accordingly, we aimed to clarify whether the relationship between plasma ADMA and NOx levels afected the AT-induced reduction of arterial stifness in middle-aged and older adults. [Methods] Thirty-one healthy middle-aged and older male and female subjects (66.4 ± 1.3 years) were randomly divided into two groups: exercise intervention and sedentary controls. Subjects in the training group completed an 8-week AT (60%-70% peak oxygen uptake [${\dot{V}}O_{2peak}$] for 45 min, 3 days/week). [Results] AT signifcantly increased ${\dot{V}}O_{2peak}$ (P < 0.05) and decreased carotid β-stifness (P < 0.01). Moreover, plasma ADMA levels were significantly decreased while plasma NOx levels and NOx/ADMA ratio were significantly increased by AT (P < 0.01). Additionally, no sex diferences in AT-induced changes of circulating ADMA and NOx levels, NOx/ADMA ratio, and carotid β-stifness were observed. Furthermore, the AT-induced increase in circulating ADMA levels was negatively correlated with an increase in circulating NOx levels (r = -0.414, P < 0.05), and the AT-induced increase in NOx/ADMA ratio was negatively correlated with a decrease in carotid β-stifness (r = -0.514, P < 0.01). [Conclusion] These results suggest that the increase in circulating NOx with reduction of ADMA elicited by AT is associated with a decrease in arterial stiffness regardless of sex in middle-aged and older adults.

불연속암반의 공학적 특성에 따른 원형수직구 편하중에 관한 연구 (A study on asymmetric load on circular shaft due to engineering characteristics of discontinuous rock masses)

  • 신영완;문경선;주경원
    • 한국터널지하공간학회 논문집
    • /
    • 제10권2호
    • /
    • pp.119-128
    • /
    • 2008
  • 원형수직구의 경우 지형적인 요인과 지반의 불균질성으로 인하여 등분포의 대칭하중이 작용하는 경우보다는 비대칭의 편하중이 작용하는 경우가 많을 것으로 예상된다. 지금까지 지반조건에 따른 원형수직구 벽체에 작용하는 편하중 산정을 위한 정량적인 연구는 미흡한 실정이다. 본 연구에서는 불연속암반의 불균질성을 고려한 불연속체 해석을 통하여 이방성 거동에 따른 원형수직구 벽체에 작용하는 편하중 분포특성을 분석하였다. 또한, 깊이에 따른 암반등급 및 초기응력이 편하중에 미치는 영향을 분석하였다. 검토 결과 절리특성에 따라 양호한 경암반에서는 25%이하의 편하중이 발생하는 것으로 분석되었으며, 수직구 깊이에 따른 암반등급의 영향을 검토한 결과 경암의 편하중비는 25%이하, 연암에서는 $30%{\sim}40%$로 나타났다. 또한, 풍화가 진행된 파쇄연암의 편하중비는 $40{\sim}50%$로 나타났다. 깊이 100m의 경암반에 대하여 초기응력을 나타내는 측압계수(Ko)를 변수로 한 불연속체 해석을 수행하였다. 해석 결과 측압계수가 2.0보다 작은 경우의 편하중비는 약 25%의 값을 나타내나 측압계수가 2.0보다 큰 경우에는 편하중비가 점차 증가하는 경향을 나타냈다.

  • PDF

Single Isolation Structure of High Aperture Ratio for a PMOLED

  • Youn, Suk-Won;Byun, Byung-Hyun;Choi, Kyung-Hee;Yi, Seung-Jun;Choi, Do-Hyun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.1028-1029
    • /
    • 2006
  • We have developed a self-aligned single isolation structure (SIS) and an asymmetric single isolation structure with an image reversal photoresist to increase the aperture ratio in a passive matrix organic light emitting display (PMOLED). Compared to the conventional structure, the fabrication process is reduced by about 17% and the aperture ratio is enlarged over 4%.

  • PDF

고종횡비 비대칭 구조물의 발파붕괴 거동에 관한 연구 (An Experimental Study on Blasting Collapse Behavior of Asymmetry Structure with High Aspect Ratio)

  • 송영석;정민수;정동월;허원호
    • 화약ㆍ발파
    • /
    • 제31권1호
    • /
    • pp.1-10
    • /
    • 2013
  • 발파해체 공법은 구조물 형상과 주변현황에 따라 다양한 공법을 적용할 수 있으나, 고종횡비를 가지는 비대칭 구조물을 발파해체 하기 위해서는 사전취약화와 발파지점 및 시차와 주변현황에 따른 발파조건을 고려하여 설계하여야 한다. 본 연구에서는 고종횡비 비대칭 구조물을 안전하게 전도시키기 위해 ELS 소프트웨어를 사용하여 사전취약화 위치와 형상에 따른 모멘트 발생지점을 분석하여 킥백(kick back)을 제어할 수 있는 사전취약화 위치 및 형상에 대한 시뮬레이션을 수행하였으며, 비대칭 구조물의 붕괴 시 전도방향의 좌우로 발생하는 비틀림 모멘트(torsional moment)를 최소화하기 위해 붕괴방향을 제어 할 수 있는 발파 시차 및 위치를 선정하였다. 또한 시뮬레이션상의 사전 취약 및 발파시차를 실 구조물의 전도 붕괴에 적용하여 붕괴 거동에 대한 모션분석을 하였다. 그 결과 시뮬레이션의 붕괴거동에 대한 신뢰성을 확인하였으며, 발파해체 시 사전취약화의 형상 및 위치에 따라 킥백을 제어할 수 있으며, 발파 위치와 시차에 따라 비틀림 모멘트를 제어 할 수 있다는 것을 알 수 있었다.

비대칭 DGMOSFET에서 터널링 전류가 채널길이에 따른 문턱전압이동에 미치는 영향 (Influence of Tunneling Current on Threshold voltage Shift by Channel Length for Asymmetric Double Gate MOSFET)

  • 정학기
    • 한국정보통신학회논문지
    • /
    • 제20권7호
    • /
    • pp.1311-1316
    • /
    • 2016
  • 본 연구에서는 단채널 비대칭 이중게이트 MOSFET의 채널길이에 따른 문턱전압이동에 터널링전류가 미치는 영향을 분석하고자 한다. 채널길이가 10 nm 이하로 감소하면 터널링 전류는 급격히 증가하여 문턱전압이동 등 2차효과가 발생한다. 단채널 효과를 감소시키기 위하여 개발된 비대칭 이중게이트 MOSFET의 경우에도 터널링 전류에 의한 문턱전압이동은 무시할 수 없게 된다. 차단전류는 열방사전류와 터널링 전류로 구성되어 있으며 채널길이가 작아질수록 터널링전류의 비율은 증가한다. 본 연구에서는 터널링 전류를 분석하기 위하여 WKB(Wentzel-Kramers-Brillouin) 근사를 이용하였으며 채널 내 전위분포를 해석학적으로 유도하였다. 결과적으로 단채널 비대칭 이중게이트 MOSFET에서는 채널길이 가 작아질수록 터널링 전류의 영향에 의한 문턱전압이동이 크게 나타나고 있다는 것을 알 수 있었다. 특히 하단게이트 전압 등에 따라 터널링 전류에 의한 문턱전압 값은 변할지라도 문턱전압이동은 거의 일정하였다.

효소적 Acyl migration을 이용한 비대칭형 재구성지질(1,2-disaturated-3-unsaturated glycerol)의 합성 및 분석 (Enzymatic synthesis of asymmetric structured lipids containing 1,2-disaturated-3-unsaturated glycerol using acyl migration)

  • 현진우;이기택
    • 농업과학연구
    • /
    • 제40권4호
    • /
    • pp.367-375
    • /
    • 2013
  • The enzymatic interesterification was performed to produce structured lipids (SLs) with palm mid fraction (PMF) and stearic ethyl ester (STEE) for 1, 3, 6, 9, 12 and 15 hr at $80^{\circ}C$. The reaction was catalyzed by Lipozyme TLIM (immobilized lipase from Thermomyces lanuginosus, amount of 20% by weight of total substrates) in a shaking water bath set at 180 rpm. The optimum condition for synthesis of asymmetric SLs were: substrate molar ratio 1:0.5 (PMF:STEE, by weight), reaction time 6 hr, enzyme 20% (wt%, water activity=0.085) of total substrate and reaction temperature $80^{\circ}C$. After reaction at optimized condition, triacylglycerols (symmetrical and asymmetrical TAGs) from reactants were isolated. POP/PPO (1,3-palmitoyl-2-oleoyl glycerol or 1,2-palmitoyl-3-oleoyl glycerol), POS/PSO (palmitoyl-oleoyl-stearoyl glycerol or palmitoyl-stearoyl-oleoyl glycerol), SOS/SSO (1,3-stearoyl-2-oleoyl glycerol or 1,2-stearoyl-3-oleoyl glycerol) were obtained by solvent fractionation. Finally, refined SLs contained stearic acid of 16.91%. Solid fat index and thermogram of the refined SLs were obtained using differential scanning calorimetry. The degree of asymmetric triacylglycerol in the refined SLs was analyzed by Ag-HPLC equipped with evaporated light scattering detector (ELSD). The refined SLs consisted of symmetric TAG of 41.15 area% and asymmetric TAG of 58.85 area%.

비대칭 압연과 열처리한 Cu 판의 집합조직과 소성변형비 변화 (II) (Changes of Texture and Plastic Strain Ratio of Asymmetrically Rolled and Annealed Cu Sheet (II))

  • 이철우;정종현;이동녕;김인수
    • 소성∙가공
    • /
    • 제29권2호
    • /
    • pp.69-75
    • /
    • 2020
  • The plastic strain ratio is one of the factors that affect the deep drawability of metal sheets. The plastic strain ratio of fully annealed Cu sheet is low, due to its texture being {001}<100>. In this study, in order to increase the plastic strain ratio of Cu sheets we investigated the effect of two treatments: 1st the sheet was asymmetrically rolled and annealed, and 2nd the sheet was symmetrically and asymmetrically rolled and subsequently annealed. The average plastic strain ratio (Rm) of the initial Cu sheet was 0.95 and |Δr| was 1.27. After the 2nd treatment of 5.3% symmetric rolling and annealing of Cu sheet at 1000℃ for 60 min in Ar gas condition, the Rm was 2.29 times higher and the |Δr| was 1.44 times higher than that of initial Cu sheet specimen. After the 2nd treatment of 8.2% asymmetric rolling and annealing of Cu sheet at 1000℃ for 60 min in Ar gas conditions, the Rm was 2.51 times higher and |Δr| was 0.53 times lower than that of the initial Cu sheet specimen. These results can be attributed to the change in texture of the Cu sheets due to the differences in the two methods of rolling.