• Applied Microscopy
• /
• v.29 no.3
• /
• pp.383-403
• /
• 1999

This study was performed to investigate the immunohistochemical and ultrastructural characterization of the choline acetyltransferase (ChAT)-immunoreactive nerve cells in the diagonal band of Broca of the rat basal forebrains, utilizing techniques of immunohistochemical and immunocytochemical microscopy. The ChAT-immunoreactivities were shown within neuronal cell bodies and processes by the light micoscope. According to cell shape and ratio of long axis vs short axis of cell body, the ChAT-immunoreaclive nerve cells in both vertical and horizontal limbs of the diagonal band of Broca were classified into 6 types. at the light microscopic level; round, oval, elongated, fusiform, triangular and polygonal types. As a result of the electron microscopic observation, the ChAT-immunoreactivated products appeared on the outer nuclear envelope, membranes of rough endoplasmic reticula (rER), free ribosomes and polysomes. Each cell type was subdivided into subtype I and II according to the several criteria such as volume of cell body, nuclear size relative to the cytoplasm, kinds and distribution of cell organelles and numbers and sorts of synapses. The subtype I of immnunoreactive nerve cells had large cell body and a small nucleus showing shallow indentations of nuclear evelope. In this subtype I with abundant cytoplasm, rER were well differentiated. Their long cisternae were parallelly ditributed and lamellated. One or two lamellar bodies and nematosomes were observed. The subtype II cell had small cell body and a large nucleus with deep indentations of nuclear envelope. In this subtype II with small cytoplasm, the rER were irregularly distributed and the lamellar body and nematosome were not found. A few axosomatic synapses in the subtype I and II were shown to be symmetric or asymmetric. The ratios of the symmetric synapse to the asymmetric one were investigated to be 1 : 2 and 1 : 4 in the subtype I and II, respectively. The axodendritic ones were almost asymmetric. But, the fusiform and triangular immunoreactive nerve cells were shown only to be subtype I. According to observations in this study, it is considered that the ultrastructural characterization in the 2 subtypes of each cell type may reflect the differences of the metabolic activities and projecting distances to the target cells.

• Journal of the Korean Magnetics Society
• /
• v.12 no.6
• /
• pp.201-205
• /
• 2002

The tunneling magnetoresistance (TMR) of a ramp-edge type junction has been studied. The samples with a structure of NiO(60)/Co(10)/NiO(60)/Si$_3$N$_4$(2-6)/NiFe(10) (nm) were prepared by the sputtering and etched by the electron cyclotron (ECR) argon ion milling. Nonlinear I-V characteristics was obtained from a ramp-type tunneling junctions having the dominant difference between zero and ＋90 Oe perpendicular to the junction edge line. The voltage dependence of TMR was stable up to a bias volt of $\pm$10 V with a TMR ratio of about -10%, which may be very peculiar magnetic tunneling properties with asymmetric tunneling process between wedge Co pinned layer and NiFe free layer.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.890-910
• /
• 2014

This paper investigates the spectrum hole utilization of cooperative schemes for the two-way relaying model in order to improve the utilization efficiency of limited spectrum holes in cognitive radio networks with imperfect spectrum sensing. We propose two specific bidirectional secondary data transmission (BSDT) schemes with two-step and three-step two-way relaying models, i.e., two-BSDT and three-BSDT schemes, where the spectrum sensing and the secondary data transmission are jointly designed. In the proposed cooperative schemes, the best two-way relay channel between two secondary users is selected from a group of secondary users serving as cognitive relays and assists the bi-directional communication between the two secondary users without a direct link. The closed-form asymptotic expressions for outage probabilities of the two schemes are derived with a primary user protection constraint over Rayleigh fading channels. Based on the derived outage probabilities, the spectrum hole utilization is calculated to evaluate the percentage of spectrum holes used by the two secondary users for their successful information exchange without channel outage. Numerical results show that the spectrum hole utilization depends on the spectrum sensing overhead and the channel gain from a primary user to secondary users. Additionally, we compare the spectrum hole utilization of the two schemes as the varying of secondary signal to noise ratio, the number of cognitive relays, and symmetric and asymmetric channels.

• Journal of the Korean Society of Costume
• /
• v.63 no.8
• /
• pp.76-89
• /
• 2013

This study is about 'asymmetry triangle-Mu' Jeoksam and Hansam in the early days of Joseon Dynasty. A study was done regarding the records of Jeoksam and Hansam in literature, the present state of the excavated 'asymmetry triangle-Mu' clothing Jeoksam and Hansam, and finally a deduction of the reason for the appearance of the 'asymmetry triangle-Mu' clothing Jeoksam and Hansam. The width of front length of 'asymmetry triangle-Mu' clothing in the early days of Joseon Dynasty is 29.5~35 cm and the width of one breath of the sleeve is 29.5~35 cm. The width of 'asymmetry triangle-Mu' is 9.5~16 cm and it is relatively big. Comparing to the width of one breath of the sleeve, it is almost 1:2.2~3.6 ratio. Therefore, when the sleeve was cut, the Mu was linked in order to save fabric the gusset of sleeve had to be folded and turned, and finally it became asymmetric. As a result of the above consideration, since the width of upper garments of $16{\sim}17^{th}$ century was big, the wearing of short tops of Jeoksam or Hansam without side vent as a small 'triangle-Mu' was uncomfortable. Because of this reason, the size had no option but to become bigger. So, during the $16^{th}$ and $17^{th}$ century, a period where mass production of fabric was difficult, the 'asymmetry triangle-Mu' type was considered to be a reasonable cutting method. After the middle of $17^{th}$ century, it can be estimated that 'asymmetry triangle-Mu' clothing disappeared according to the narrow aspect of clothing type.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1537-1546
• /
• 2017

Many thermal-hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor) design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop) has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium) safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test) facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant) performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test) facility to evaluate the safety injection performance and to validate the thermal-hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux) test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop) facility to construct a database from the $5{\times}5$ rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio) model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.2 s.245
• /
• pp.126-135
• /
• 2006

The pressure drop characteristics in a rotating two-pass duct with rib turbulators are investigated in the present study. The square duct has a hydraulic diameter $(D_h)$ of 26.7 mm, and $1.5mm{\times}1.5mm$ square $90^{\circ}-rib$ turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$ and the width of divider wall is 6.0mm or $0.225D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure drop distribution, the friction factor and thermal performance are presented for the leading, trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}$-turn produces Dean vortices that cause high pressure drop in the turn. The channel rotation results in pressure drop discrepancy between leading and trailing surfaces so that non-dimensional pressure drops are higher on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent pressure drop characteristics also change. As the rotation number increases, the pressure drop discrepancy enlarges.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.57-62
• /
• 2000

Sulfonated Polysulfone (SPSF) cation-exchange membranes were synthesized by introducing various ratio of chlorosulfuric acid (CSA) onto the main chain of polysulfone (PSF). Properties such as ion exchange capacity, water content, liked ion concentration, and partition coefficient were measured, respectively. Through the analysis of DSC and TGA, it has been shown that glass transition temperature increased and weight loss decreased as sulfuric acid group concentration increased. Structure of membrane measured by AFM and SEM was seen to be asymmetric. Apparent diffusion coefficient of sodium ions through SPSF membrane by AC impedance was increased as sulfuric acid group concentration increased.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.8 s.227
• /
• pp.910-920
• /
• 2004

The heat/mass transfer characteristics in a rotating two-pass duct with and without rib turbulators are investigated in the present study. The square duct has a hydraulic diameter ($D_h$) of 26.7 mm, and $1.5\;mm{\times}1.5\;mm$ square $90^{\circ}$-rib turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The Reynolds number based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number is varied from 0.0 to 0.20. In the smooth duct, the curvature of the $180^{\circ}$-turn produces Dean vortices that enhance heat/mass transfer in the post-turn region. When rib turbulators are installed, heat/mass transfer is augmented 2.5 times higher than that of the smooth duct since the main flow is turbulated by reattaching and separating in the vicinity of the duct surfaces. The duct rotation results in heat/mass transfer discrepancy so that Sherwood number ratios are higher on the trailing surface in the first-pass and on the leading surface in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent heat/mass transfer characteristics also change. As the rotation number increases, the heat/mass transfer discrepancy enlarges.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.4
• /
• pp.140-145
• /
• 2008

Silicon single crystals are grown by Czochralski (CZ) method in different growing conditions. The different shapes of the crystal-melt interface are obtained with various magnetic fields. Effects of zero-Gauss plane (ZGP) shape and magnetic intensity (MI) on the crystal-melt interface in the crystal experimentally are investigated. The shape of ZGP is not only flat but also parabolic, which is due to magnetic ratio (MR) of the lower to upper current densities in the configurations of the cusp-magnetic fields. As the MR increases, the crystal-melt interface becomes more concave. It means that the hot melt can be easily transported to the crystal-melt interface with increasing the MR. Effective shape of the crystal-melt interface is found to depend on the magnetic field in cusp-magnetic CZ method. The experimental results are compared with other studies and discussed.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.7
• /
• pp.66-79
• /
• 1999

We investigate the effects of high input power on the performance of optical bistable symmetric self-electooptic effect devices (S-SEEDs) using extremely shallow quantum wells (ESQWs). In this study, we consider the four ESQWs SEEDs; anti-reflection (AR)-coated ESQWs S-SEED, back-to-back AR coated ESQWs S-SEED, asymmetric F뮤교-Perot (AFP) ESQWs S-SEED, and back-to-back AFP-ESQWs S-SEED. As the input power increases, device performances such as on/off contrast ratio, on/off reflectivity difference are seriously degraded because of ohmic heating and exciton saturation. On the other hand, switching speed of the device increases up to certain value and then begins to decrease. With reasonable optimization of the input power for the best switching speed operation of the devices in a cascading optical interconnection system, we simulate and analyze the system bit-rate of the various ESQWs S-SEEDs, for a mesa of $5{\times}5{\mu}m^2$ size, changing the namber of quantum wells for the external bias of 0 V and -5V.