• 제목/요약/키워드: Asymmetric position

검색결과 153건 처리시간 0.023초

고 출력 응용을 위한 2개의 전송영점을 가지는 최소화된 SOI CMOS 가변 대역 통과 여파기 (SOI CMOS Miniaturized Tunable Bandpass Filter with Two Transmission zeros for High Power Application)

  • 임도경;임동구
    • 전자공학회논문지
    • /
    • 제50권1호
    • /
    • pp.174-179
    • /
    • 2013
  • 이 논문에서는 multiple split ring resonator(MSRRs)와 로딩된 스위치드 제어부를 이용하여 2개의 전송영점을 가지는 대역통과 여파기를 설계하였다. 높은 선택도와 칩 사이즈의 초소형화를 위해 비대칭의 급전 선로를 도입하여 통과 대역 주위에 위치한 전송 영점 쌍을 생성하였다. Cross coupling 또는 source-load coupling 방식을 이용한 기존의 여파기와 비교해보면 이 논문에서 제안된 여파기는 단지 2개의 공진기만으로 전송 영점을 생성하여 높은 선택도를 얻었다. 여파기의 선택도와 민감도(삽입 손실)를 최적화하기 위해 비대칭 급전 선로의 위치에 따른 전송 영점과 삽입손실의 관계를 분석하였다. 통과 대역 주파수의 가변과 30dBm 정도의 고 출력 신호를 처리하기 위해 MSRRs의 최 외각 링에 MIM 커패시터와 stacked-FET으로 구성된 SOI-CMOS 스위치드 제어부가 로딩되어 있다. 스위칭 트랜지스터의 전원을 켜고 끔으로써 통과 대역 주파수를 4GHz로부터 5GHz까지 이동시킬 수 있다. 제안된 칩 여파기는 0.18-${\mu}m$ SOI CMOS 기술을 이용함으로써 높은 Q를 가지는 수동 소자와 stacked-FET의 집적을 가능하게 만들었다. 설계된 여파기는 $4mm{\times}2mm$ ($0.177{\lambda}g{\times}0.088{\lambda}g$)의 초소형화 된 크기를 가진다. 여기서 ${\lambda}g$는 중심 주파수에서의 $50{\Omega}$ 마이크로스트립 선로의 관내 파장을 나타낸다. 측정된 삽입손실(S21)은 5.4GHz, 4.5GHz에서 각 각 5.1dB, 6.9dB를 나타내었다. 설계된 여파기는 중심 주파수로부터 500MHz의 오프셋에서 20dB이상의 대역외 저지 특성을 나타내었다.

Increase In Mean Alveolar Pressure Due To Asymmetric Airway Geometry During High Frequency Ventilation

  • Cha, Eun-J.;Lee, Tae-S.;Goo, Yong-S.;Song, Young-J.
    • 대한의용생체공학회:의공학회지
    • /
    • 제14권1호
    • /
    • pp.89-96
    • /
    • 1993
  • During high frequency ventilation (HFV), mean alveolar pressure has been measured to increase with mean airway opening pressure controlled at a constant level in both humans and experimental animals. Since this phenomenon could potentiate barotrauma limiting advantages of HFV, the present study theoretically predicted the difference between menu alveolar and airway opening pressures ($MP_{alv}$). In a Weibel's trumpet airway model, approximated formula for $MP_{alv}$ was derived based on momentum conservation assuming a uniform velocity profile. The prediction, equation was a func pion of gas density($\rho$), mean flow rate(Q), and diameter of the airway opening where the pressure measurement was made($D_0$) : $MP_{alv}=4{\rho}(Q/D_0^{2})^2$. This was a result of the difference in crosssectional area between the alveoli and the airway opening. A simple aireway model experiment was performed and the results well fitted to the prediction, which demonstrated the validity of the present analysis. Previously reported $MP_{alv}$ data from anesthetized dogs in supine position were comparable to the predicted values, indicating that the observed dissociation between mean alveolar and airway opening pressures during HFV can be explained by this innate geometric (or cross-sectional area) asymmetry of the airways. In lateral position, however, the prediction substantially underestimated the measurements suggesting involvement of other important physiological mechanisms.

  • PDF

고속 블록 정합 움직임 측정을 위한 십자-다이아몬드-삼각 탐색 알고리즘 (A Cross-Diamond-Triangle Search Algorithm for Fast Block-Matching Motion Estimation)

  • 김성훈;신재민;오승준;안창범;박호종;심동규
    • 방송공학회논문지
    • /
    • 제10권3호
    • /
    • pp.357-371
    • /
    • 2005
  • 본 논문에서는 CDS(Cross-Diamond Search algorithm) 및 CDHSs(Cross-Diamond-Hexagonal Search algorithms)의 성능을 향상시키기 위하여 탐색 영역의 위치에 따라 최적의 탐색 형태를 적용하는 CDTS(Cross-Diamond-Triangle Search algorithm)를 제안한다. CDTS에서 탐색 영역의 위치에 따라 최적의 탐색 형태를 적용하기 위하여 다양한 실험 영상들의 움직임 분포를 먼저 분석하였다. 분석된 움직임 분포에 근거하여 CDTS 구현 시 탐색 영역 중심부에서는 십자 탐색 형태와 다이아몬드 탐색 형태를 적용하고, 나머지 탐색 영역에서는 삼각 탐색 형태와 다이아몬드 탐색 형태를 적용한다. CDTS에서 제안하는 삼각 탐색 형태는 기존 탐색 알고리즘에서 사용하는 대칭형 구조와는 다르게 비대칭형 구조를 가지고 탐색점을 더욱 감소시키는 효과를 제공하면서도 화질을 유지할 수 있다. CDTS를 CDS 및 CDHSs와 비교하였을 때 화질 열화 없이 각각 평균 16.22$\%$ 및 3.09$\%$ 정도의 탐색점 감소 효과가 나타났다.

Solution Dynamics and Crystal Structure of $CpMoOs_{3}(CO)_{10}(\mu-H)_{2}[\mu_{3}-\eta^{2}-C(O)CH_{2}Tol]$

  • Joon T. Park;Jeong-Ju Cho;Kang-Moon Chun;Sock-Sung Yun;Kim SangSoo
    • Bulletin of the Korean Chemical Society
    • /
    • 제14권1호
    • /
    • pp.137-143
    • /
    • 1993
  • The tetranuclear heterometallic complex CpMo$Os_3(CO)_{10}({\mu]-H)2[{\mu}3-{\eta}^2-C(O)CH_2Tol]\;(1,\;Cp={\eta}^5-C_5H_5,\;Tol=p-C_6H_4Me)$ has been examined by variable-temperature $^{13}$C-NMR spectroscopy and by a full three-dimensional X-ray structual analysis. Complex 1 crystallizes in the orthorhombic space group Pna2$_1$ with a = 12.960(1) ${\AA}$, b = 11.255(l) ${\AA}$, c = 38.569(10)${\AA}$, V = 5626(2) ${\AA}^3$ and ${\rho}$(calcd) = 2.71 gcm$^{-3}$ for Z = 8 and molecular weight 1146.9. Diffraction data were collectedon a CAD4 diffractometer, and the structure was refined to $R_F$ = 9.7% and $R_{W^F}$ = 9.9% for 2530 data (MoK${\alpha}$ radiation). There are two essentially equivalent molecules in the crystallographic asymmetric unit. The tetranuclear molecule contains a triangulated rhomboidal arrangement of metal atoms with Os(2) and Mo at the two bridgehead positions. The metal framework is planar; the dihedral angle between Os(l)-Os(2)-Mo and Os(3)-Os(2)-Mo planes is 180$^{\circ}$. A triply bridging (${\mu}_3,\;{\eta}^2$) acyl ligand lies above the Os(l)-Os(2)-Mo plane; the oxygen atom spans the two bridgehead positions, while the carbon atom spans one bridgehead position and an acute apical position. The molecular architecture is completed by an ${\eta}^5$-cyclopentadienyl ligand and a semi-triply bridging carbonyl ligand on the molybdenum atom, and nine terminal carbonyl ligands-four on Os(3), three on Os(l), and two on Os(2). The two hydride ligands are inferred to occupy the Os(l)-Os(2) and Mo-Os(3) edges from structural and NMR data.

단상 영구자석 동기 전동기의 가상 dq축 기반 초기 회전자 자극 검출 (Initial Rotor Polarity Detection of Single-phase Permanent Magnet Synchronous Motor Based on Virtual dq-axis)

  • 서승우;황선환;이기창
    • 전기전자학회논문지
    • /
    • 제24권4호
    • /
    • pp.1004-1010
    • /
    • 2020
  • 본 논문은 단상 영구자석 동기전동기의 초기 회전자 자극 검출 기법을 제안한다. 대상 전동기는 저속 및 정지 상태에서 역기전력을 기반으로 위치 정보를 얻을 수 없다. 따라서 초기 개루프 기동이 필요하며 이 과정에서 저 전류 및 소프트 기동을 위한 초기 회전자 위치 정보가 필요하다. 제안하는 초기 회전자 자극 검출 알고리즘의 경우 비대칭 공극의 영향 및 영구자석 자속의 영향을 고려하였으며, 고주파 전압 신호 주입을 기반으로 정확한 검출을 위한 오프셋 전압을 이용하였다. 이때 고주파 전압 신호로부터 유도된 고주파 전류의 경우 가상의 dq축을 이용하여 유도된 전류의 최댓값 취득을 통해 회전자 영구자석 자극을 판별한다. 본 논문에서는 센서리스 운전의 저전류 및 소프트 기동을 위해 제안된 초기 회전자 자극 검출 알고리즘을 홀센서 신호를 근거로 효용성 및 타당성을 다수의 실험을 통해 검증하였다.

Directions of mandibular canal displacement in ameloblastoma: A computed tomography mirrored-method analysis

  • Evangelista, Karine;Cardoso, Lincoln;Toledo, Italo;Gasperini, Giovanni;Valladares-Neto, Jose;Cevidanes, Lucia Helena Soares;de Oliveira Ruellas, Antonio Carlos;Silva, Maria Alves Garcia
    • Imaging Science in Dentistry
    • /
    • 제51권1호
    • /
    • pp.17-25
    • /
    • 2021
  • Purpose: This study was performed to investigate mandibular canal displacement in patients with ameloblastoma using a 3-dimensional mirrored-model analysis. Materials and Methods: The sample consisted of computed tomographic scans of patients with ameloblastoma (n=10) and healthy controls (n=20). The amount of mandibular canal asymmetry was recorded as a continuous variable, while the buccolingual (yaw) and supero-inferior (pitch) directions of displacement were classified as categorical variables. The t-test for independent samples and the Fisher exact test were used to compare groups in terms of differences between sides and the presence of asymmetric inclinations, respectively (P<0.05). Results: The length of the mandibular canal was similar on both sides in both groups. The ameloblastoma group presented more lateral (2.40±4.16 mm) and inferior (-1.97±1.92 mm) positions of the mental foramen, and a more buccal (1.09±2.75 mm) position of the middle canal point on the lesion side. Displacement of the mandibular canal tended to be found in the anterior region in patients with ameloblastoma, occurring toward the buccal and inferior directions in 60% and 70% of ameloblastoma patients, respectively. Conclusion: Mandibular canal displacement due to ameloblastoma could be detected by this superimposed mirrored method, and displacement was more prevalent toward the inferior and buccal directions. This displacement affected the mental foramen position, but did not lead to a change in the length of the mandibular canal. The control group presented no mandibular canal displacement.

자기 공명 영상을 이용한 안면비대칭환자의 측두하악관절원반의 형태와 위치에 관한 연구 (Morphologic and positional assessment of temporomandibular joint disk in facial asymmetric patients by magnetic resonance imaging)

  • Zou, Bingshuang;Kim, Tae-Woo;Choi, Soon-Chul
    • 대한치과교정학회지
    • /
    • 제35권5호
    • /
    • pp.398-407
    • /
    • 2005
  • 본 연구는 안면비대칭이 있는 환자의 측두하악관절원반 형태와 위치를 평가하고 악관절내장증과 안면비대칭 간의 관계를 규명하기 위하여 시행되었다. 남자 10명 및 여자 27명으로 구성된 안면비대칭 환자 37명의 74개의 TMJ MRI를 사용하였으며, 대상 집단의 연령은 12세에서 44세까지의 범위로 평균 21.4세였다. 시상 및 두정 TMJ MRI를 최대감합위 및 최대개구위에서 채득한 후 부분전방변위, 전방변위, 회전 또는 측방원반변위 등 원반변위의 종류를 기록하였으며, 원반의 모양위치, 그리고 원반의 변위 및 회전을 MRI tracing 상에서 판독하였다. 악관절내장증의 증상은 정상, 정복성 전방원반변위(ADDR), 그리고 비정복성 전방원반변위 (ADDNR) 집단으로 분류하였으며, 환자는 양측성 정상. 편측 혹은 양측 내장증 집단으로 분류하였다. 약$70\%$의 환자에서 편측성 또는 양측성 내장증을 보였으며. 통계분석 결과 ADD, 특히 회전성 ADD가 변위측에서 더 높은 빈도로 나타났으나 반대측에서는 원반의 위치가 정상인 경우가 많았다. (p<0.01). 변위측의 원반은 모양의 변형 및 하전방 변위를 유의하게 더 나타냈다. 그러나 반대쪽은 개구시 원반이 수직방향으로 과운동성이 관찰되었다. 이 연구는 안면비대칭 환자에서 ADD의 종류가 원반의 모양, 경사 변위 각도, 변위의 수직거리 및 회전각도와 연관이 있다는 것을 제시한다

Superconductive Multi-pole Hairpin type Filter과 Delay Time 설계 및 실험 (Modeling and Simulation of the Delay Time in Superconductive Multi-pole Hairpin type Filter)

  • 양재라;정구락;강준희
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.135-137
    • /
    • 2002
  • In the favor of adjusting microwave signal, Hairpin type Filter, which delay microwave signal enough to several nanosecond, is a key component. One of the main advantage in using Hairpin type Filter is a conveniency for equipping with Delay Module, and because of having a wide bandwidth, Hairpin type Filter can be designed to satisfy the most applications. In this work, we attempted to estimate the delay time in a superconductive hairpin type filter A software to synthesize even and odd order equiripple hairpin type filter has been developed. This software arbitrarily locate its transfer zeros making symmetric of asymmetric amplitude response and equalizing group delay. Borland C++ compiler has been used. The program was designed to run under MS-DOS, Window 98, Window 2000. The program optimizes the position of the transfer function zeros in order to fulfill the group delay specification masks. We designed and fabricated a hairpin type HTS 2-pole microstrip bandpass filter to operate at 5.8Ghz. The fabrication method was pulsed laser deposition and YBCO films were deposited on sapphire substrates with a Ce$O_{2}$ thin layer as a buffer layer. We also developed a new style hairpin type filter by using interdigitide inner-pole. Compared to the same size regular hairpin type filters, our filters had a lower center frequency.

  • PDF

Fringe-Field Switching (FFS) 모드에서 잔상 정량화에 관한 연구 (Study on the Quantitativity of Image Sticking in the Fringe-field Switching(FFS) Mode)

  • 신승민;김미숙;정연학;김향율;김서윤
    • 한국전기전자재료학회논문지
    • /
    • 제18권8호
    • /
    • pp.720-723
    • /
    • 2005
  • We studied the quantitativity of the image sticking which is occured by the resicual DC in the fringe-electric field switching (FFS) mode. Actually, in the FFS mode driven by the strong fringe electric field, the asymmetric residual DC was formed in the bottom substrate. It made the impurity ion stick to the alignment layer such as polyimde layer. Thus, the differnece of the luminance existes after the stress check pattern is applied to the panel so that we can see the image sticking. This image sticking decreases as the residual DC value between specific patterns decreases. Therefore, it is necessary to control the residual DC for the FFS mode with the high image quality. It is possible to eliminate the image stiking when the extra pixel voltage is applied through the circuit tunning for reducing the difference of residual DC accroding to the panel position.

Simultaneous source frequency phase referencing observations of H2O and SiO masers toward VX Sgr

  • Yoon, Dong-Hwan;Cho, Se-Hyung;Yun, Young-Joo;Choi, Yoon Kyung;Kim, Jaeheon
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.40.3-41
    • /
    • 2015
  • We performed simultaneous observations of H2O and SiO masers toward VX Sgr using the Korean VLBI Network (KVN) and Source Frequency Phase Referencing (SFPR) method. The observations were carried out at 5 epochs from 2014 February to 2015 June. The relative locations of the SiO with respect to the H2O maser emission were determined at two epochs by SFPR for the first time. The H2O masers show well developed asymmetric outflow features which are spread up to ~300 mas in diameter. On the other hand, the SiO masers show a ring-like structure close to the central star with ~ 30 mas diameter. The SFPR observational results at two epochs (${\varphi}=0.83$ and 0.99) provide similar relative locations of H2O and SiO maser features. These superposed maps of H2O and SiO masers lead us to investigate the development of outflow motions from relatively spherical SiO maser regions close to central star to aspherical H2O maser regions according to optical phase of stellar pulsation together with the prediction of the position of central star.

  • PDF