• 전기학회논문지
• /
• 제57권4호
• /
• pp.660-667
• /
• 2008

To improve the luminous efficacy of PDPs, an AC PDP with new metal electrode structure is suggested. Operating voltage margin, power consumption, luminance, luminous efficacy, addressing jitter and ICCD image of test panel with proposed structure are measured, to compared with performances of the conventional ITO structure and proposed structures. To enhance luminous efficacy, we designed new structure which have asymmetric metal electrode structure. The experimental results show that the suggested structure shows luminance to maximum 89% and luminous efficacy to maximum 107% compared with conventional ITO standard structure. In addition, proposed structures with asymmetric electrode show low power consumption by $2{\sim}3%$, high luminance by $5{\sim}7%$, and high luminous efficacy by $2{\sim}3%$ compared with proposed symmetric electrode structures.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.732-738
• /
• 2015

In ac discharge, emission efficiency shows an time-varying characteristics during discharge. The phenomenon is caused by the potential distribution changes during the discharge, which indicates that a specific potential distribution can contribute to a high improvement of the emission efficiency. To create an artificial environment for a potential distribution favorable to emission efficiency, we used the asymmetric electrode structure and proved the capability. Our results showed that the ratio of the area of anode to cathode became larger, the emission efficacy was greatly improved.

• 전기화학회지
• /
• 제6권2호
• /
• pp.153-157
• /
• 2003

전기이중층 축전용량(electric double layer capacitance)과 유사축전용량(pseudo-capacitance)을 함께 갖는 하이브리드 전기화학 축전기에 대한 연구를 수행하였다. 양극은 $Ni(OH)_2$ 활성탄소가 복합된 전극을 사용하였으며 음극은 활성탄소를 활물질로 사용하므로써 비대칭 전극 구조를 갖는다. 셀 실험을 위하여 $5\times5cm^2$ 크기인 전극을 제작 사용하였다. Cyclic voltammetry측정 및 교류 임피던스 측정실험을 통하여 각각의 셀들이 갖는 전기화학적 거동을 조사하였고 충 방전 실험을 통하여 양극과 음극의 최적 질량비를 조사하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1189-1192
• /
• 2007

We propose new driving schemes, asymmetry and long gap mode, of PDP having auxiliary electrode between scan and common electrode. For the asymmetric modes, the auxiliary electrode located nearly center of the primary electrodes is connected to the scan of common electrode during all periods of reset, address and sustain. For the long gap mode, it is electrically disconnected or maintained at dc voltage of Vs/2 during sustain period except the first several sustain pulses. The proposed structure and driving method can provide higher luminous efficacy by minimizing consumption energy. The effectiveness of the new driving schemes has been investigated for various Xe partial pressure conditions.

• 한국통신학회논문지
• /
• 제19권9호
• /
• pp.1782-1792
• /
• 1994

$Ti:LiNbO_3$채널형 광도파로와 Asymmetric Coplanar Strip(ACPS) 전극구조를 이용해서, $1.3{\mu}m$에서 동작하는 진형파형 위상 광변조기를 설계, 제작한 다음 변조특성을 관찰하였다. 위상정합이 개선되도록 ACPS 진행파형 전극을 설계하기 위해서 전극과 완충박막의 두께를 포함하여, 전극제원의 해석적 함수로 특성저항, 변조파의 유효굴절률 및 전극손실 등을 고려하였다. Ti 확산방법으로 저손실 채널형 광도파로 제작하였으며, double-spin image reversal 공정을 이용해서 $2.5{\mu}m$ 두께의 전극을 형성하였다. 9GHz 부근에서의 전극구조 공진형상 때문에 변조특성이 제한 되었지만, 2.5GHz 까지는 큰 왜곡없이 변조특성이 관찰되었다.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.92-98
• /
• 2002

Pb(Zr$_{0.8}$Ti$_{0.2}$)O$_3$강유전체 음극의 상부 전극 크기를 변화시키며(500$mu extrm{m}$~900$\mu\textrm{m}$)비대칭 전극 구조에서의 전자 방출에 대하여 연구하였다. 펄스 전기장을 가했을 때 나타나는 분극 반전에 의한 전류 밀도는 상부 전극 크기를 감소시킴에 따라 증가하였다. 이것은 비대팅 전극 구조에 의해 강유전체 표면에서 stray-field가 발생하고, stray field가 전극의 모서리 부근의 강유전체 표면 하부에도 분극 반전을 발생시켰기 때문이다. 전기장 전산모사를 통하여 이러한 stay-field의 존재 가능성을 예측할 수 있었고, 분극 반전에 의한 전류 밀도 측정 결과 stray-field가 미치는 거리는 약 11-l4$\mu\textrm{m}$이었다. 전자방출의 문턱전계는 항전계 의 약 3배인 61-68kV/cm이었으며, 문턱전계가 단순히 강유전체의 항전계에 의해 결정되는 것이 아니라, 강유전 음극의 구조에 의해 결정되는 stray-field의 세기와 stray-field가 미치는 거리에 영향을 받음을 전산모사를 통해 예측할 수 있었다.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.357-362
• /
• 2017

Among the lithium metal oxides for asymmetric hybrid supercapacitor, $Li_4Ti_5O_{12}(LTO)$ is an emerging electrode material as zero-stain material in volume change during the with the charging and discharging processes. The pulverized LTO powder was observed to show the enhanced capacity from 120 mAh/g to 156 mAh/g at C-rate (10, 100 C). Hybrid supercapacitor module(48V, 416F) was fabricated using an asymmetric hybrid capacitor with a capacitance of 7500F. As a result of the measurement of C-rate characteristics, the module shows that the discharge time is drastically reduced at more than 50C, and the ESR and voltage drop characteristics are increased. The energy density and power density were reduced under high C-rate conditions. When designing asymmetric hybrid supercapacitor module, the C-rate and ESR should be considered As a result of measuring the 5 kw UPS, it was discharged at the current of 116A~170A during the discharge in the voltage range of 48V~30V, and the compensation time at discharge was measured to be about 33.2s. Experimental results show that it can be applied to applications related to stabilization of power quality by applying hybrid supercapacitor module.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2007년도 추계학술대회
• /
• pp.77-83
• /
• 2007

This paper presents numerical and experimental works for simultaneous pumping and mixing small liquid using asymmetric microelectrode arrays, based on AC electroosmotic flows. To this end, four arrangements of electrode pairs were considered with diagonal/herringbone shapes. Numerical simulations were made of three-dimensional geometries by using the linear theory. The results indicated that the helical flow motions induced by the electrode arrays play a significant role in the mixing enhancement. The pumping performance was influenced by the slip velocity at the center region of the channel compared to that near the side walls. To validate the numerical predictions, the microfluidic devices were made through MEMS. The flow rate was obtained by using micro PIV, increasing the applied frequency. The electrolyte was potassium chloride solution. The flow patterns above electrodes were visualized to see lateral flow for mixing. The experimental results showed good agreements with the numerical predictions.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.42-49
• /
• 1992

Charge accumulation characteristics in low density polyethylene (LDPE) has been discussed based upon the internal charge distrubution measured by the pulsed electroacoustic technique. When the negative voltage with respect to earth is applied to the upper electrode, the negative charges near the anode and the positive charges near the cathode are accumulated in LDPE. Also, there was an asymmetric behavior of charge accumulation exhibiting that the charge accumulation near the anode keeps increasing whereas that near the cathode increases first and then decreases. Besides, under the present test conditions the internal charge distrubution becomes stabilized eventually. When the positive voltage with respect to earth is applied to the upper electrode, on the other hand, no such asymmetric charge accumulation was found. Therefore, it can be concluded that the heterocharges are accumulated at the surface region of LDPE subjected to high do voltages and that the begavior of charge accumulation depends on the polarity of do voltage and the position of charge accumulation.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1727-1732
• /
• 2004

A nickel layer was deposited onto the PZT thin films, serving both as a selective radiation absorption layer and as a top electrode. The absorption properties of such nickel coated multi-layered infrared detectors were studied in the visible and infrared wavelength ranges. The optimal thickness of the nickel layer on our substrate was 10nm. The maximum absorption coefficient of the deposited 10nm thick nickel layer was 0.7 at a 632nm wavelength. However, a striking asymmetric polarization hysteresis loop was observed in these PZT thin films with nickel as the top electrode. This asymmetric polarization was attributed to the difference between the dynamic pyroelectric responses in these Ni/PZT/Pt films poled either positively or negatively before the measurement. A positively poled film showed a 40% higher voltage response than a negatively poled detector.