• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.27-31
• /
• 2014

A simple bimodal model has been developed to analyze charged particle coagulation by modifying previously suggested bimdal model for evolution of particle generation and growth. In the present model, two monodisperse modes are used and 40 charge nodes are assigned to each mode to account both change of the particle size and charge distribution. In addition, we also implemented the effect of electrostatic dispersion loss in the present model. Based on the developed model, we analyzed coagulation of asymmetric bipolar charged particles by computing evolutions of particle number concentration, geometric mean diameter of particles, charge asymmetric ratio and geometric standard deviation of particle size distribution for various initial charge asymmetric ratios. The number concentration of asymmetric bipolar charged particles decreases faster than that of neutral particles but that does not give faster growth of particles since the electrostatic dispersion loss overwhelms particle growth by coagulation.

• Structural Engineering and Mechanics
• /
• 제29권5호
• /
• pp.505-530
• /
• 2008

This paper proposes the application of active multiple tuned mass dampers (AMTMD) for translational and torsional response control of a simplified two-degree-of-freedom (2DOF) structure, able to represent the dynamic characteristics of general asymmetric structures, under the ground acceleration. This 2DOF structure is a generalized 2DOF system of an asymmetric structure with predominant translational and torsional responses under earthquake excitations using the mode reduced-order method. Depending on the ratio of the torsional to the translational eigenfrequency, i.e. the torsional to translational frequency ratio (TTFR), of asymmetric structures, the following three cases can be distinguished: (1) torsionally flexible structures (TTFR < 1.0), (2) torsionally intermediate stiff structures (TTFR = 1.0), and (3) torsionally stiff structures (TTFR > 1.0). The even distribution of the AMTMD within the whole width and half width of the asymmetric structure, thus leading to three cases of installing the AMTMD (referred to as the AMTMD of case 1, AMTMD of case 2, AMTMD of case 3, respectively), is taken into account. In the present study, the criterion for searching the optimum parameters of the AMTMD is defined as the minimization of the minimum values of the maximum translational and torsional displacement dynamic magnification factors (DMF) of an asymmetric structure with the AMTMD. The criterion used for assessing the effectiveness of the AMTMD is selected as the ratio of the minimization of the minimum values of the maximum translational and torsional displacement DMF of the asymmetric structure with the AMTMD to the maximum translational and torsional displacement DMF of the asymmetric structure without the AMTMD. By resorting to these two criteria, a careful examination of the effects of the normalized eccentricity ratio (NER) on the effectiveness and robustness of the AMTMD are carried out in the mitigation of both the translational and torsional responses of the asymmetric structure. Likewise, the effectiveness of a single ATMD with the optimum positions is presented and compared with that of the AMTMD.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.272-277
• /
• 2005

직경이 0.152 m이고 높이가 3.5 m인 기-액 향류 흐름 기포탑에서 기포의 물성과 흐름의 거동을 고찰하고 진단하였다. 기체와 액체의 유속 그리고 기포의 분산형태(even, wall-side, central or asymmetric distribution)가 반응기 내부에서 기포의 크기, 빈도수, 상승속도와 체류량 등 기포특성에 미치는 영향을 이중 전기 저항 탐침법을 이용하여 측정 검토하였다. 기포의 크기, 빈도수와 체류량은 기체나 액체 유속의 증가에 따라 증가하였다. 기포의 상승속도는 기체 유속의 증가에 따라 증가하였지만, 액체 유속의 증가에 따라서는 감소하였다. 기포 크기 분포의 균일성이나 체류량은 기포 분산판에서 기포의 분산형태가 균일분포에서 벽면, 중앙 그리고 비대칭 분산으로 변화함에 따라 감소하였다. 기포의 체류량과 분포에 대한 균일성을 고려하면, 기포의 중앙 분산 형태가 비대칭 분산 형태보다는 유리하며, 벽면 분산형태분산보다는 좋지 않았다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권1호
• /
• pp.17-21
• /
• 2011

A hybrid superconducting fault current limiter (SFCL) with fast switch had been previously suggested by our research group. To make a hybrid SFCL, different superconducting wires were wound two pancake coils so that two pancake coils had asymmetric configuration. The impedance of the asymmetric non-inductive coils are zero with applied normal current. However during the fault. currents were distributed unequally into the two pancake coils because each superconducting wires have different electrical characteristics. This unequal distribution of current causes effective magnetic flux which generate repulsive force. Fast switch was thus opened by the force applied to the aluminum plate which consists of SFCL. In this paper, the AC loss characteristics of the asymmetric non-inductive coils with combinations of superconducting wires were studied and calculated by related experiments and finite element method (FEM) simulation. From these results, we suggested the appropriate combination of two superconducting wires to be used for the asymmetric non-inductive coils.

• 한국전기전자재료학회논문지
• /
• 제28권4호
• /
• pp.271-275
• /
• 2015

The floodlighting assists the pilot in taxiing the aircraft into and out of the final parking position and provide lighting suitable for passenger to embark and debark and for personnel to load and unload cargo. It is composed of sodium lamps which is consuming high energy. It needs to develop a dedicated LED lamp to replace the existing lamps. In this paper, We propose a suitable asymmetric angle of LED lamps to avoid a pilot's glare and to meet the standard illumination. For this, we analyze asymmetric angle of sodium lamps which are using in airport and confirm whether the illumination distribution and glare index meet the relating standards by using simulation method. Also, we study the needs of asymmetric characteristics of LED ramp by simulating the LED lamps with and without asymmetric characteristics of ramp respectively. With the simulation result, finally we propose the best asymmetric angle of LED lamp to meet the average illumination standard, and avoid a pilot's glare.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.393-402
• /
• 2021

This study aims to examine whether symmetric effects or asymmetric effects of exchange rates exist in determining the money demand in Indonesia. Simple-sum money and Divisia money were included in different models for comparison due to the financial developments in Indonesia. This study uses time-series data from 1996Q1 to 2019Q4 for the estimation. The nonlinear autoregressive distributed lag (NARDL) model is utilized to verify the asymmetric effects of exchange rates on money demand. The Augmented Dickey-Fuller and Phillips-Perron unit root tests were performed to verify the order of integration of the variables. The findings of this study revealed that the exchange rate is one of the most important determinants of money demand in Indonesia and the effect is asymmetric. The findings further indicated that money demand function, which incorporates Divisia monetary aggregate is parsimonious. Monetary targets such as money supply and interest rates are critical for monetary policy conduct to achieve inflation levels set by government. As the adoption of an inflation targeting framework needs to be in keeping with the flexible exchange rate system, the asymmetric effect of exchange rate changes can be used in exchange rate policy conduct to achieve financial system and price stability.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.65-75
• /
• 1996

The probability distributio function (pdf) of transmitted symbols should be asymmectric for recovering the received data in the 3rd order blind equalizer system. In this paper, we hav edesigned the blind equalizer using symmetric-asymmetric (SA) and asymmetric-symmetric (AS) transforms for less computational complexities and robustness in the noisy environments. The method of SA and AS transform was peformed using natural logarithmic operation. This paper proves that the proposed in this paper can be performed as real time operation. This paper proves that the compression factor k has no effet on transmitted symbols. Also 3rd order equalization method proposed in this paper can be performed as real time operation. As a result of computer simulatio, the computational complexity of proposed algorithm is reduced to be an half of 4th order method and MSE is enhanced as 10dB at the case of 4-PAM and 15dB at the case of 8-PAM respectivley. Conclusively, we have found that 3rd order blind equalizer can be implemented when the pdf of transmitter is asymmetric.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.794-799
• /
• 1999

This study deals with robustness bounds estimation for uncertain linear systems with structured perturbations where the eigenvalues of the perturbed systems are guaranteed to stay in a prescribed region. Based upon the Lyapunov approach, new theorems to estimate allowable perturbation parameter bounds are derived. The theorems are referred to as the zero-order or first-order asymmetric robustness measure depending on the order of the P matrix in the sense of Taylor series expansion of perturbed Lyapunov equation. It is proven that Gao's theorem for the estimation of stability robustness bounds is a special case of proposed zero-order asymmetric robustness measure for eigenvalue assignment. Robustness bounds of perturbed parameters measured by the proposed techniques are asymmetric around the origin and less conservative than those of conventional methods. Numerical examples are given to illustrate proposed methods.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.21-24
• /
• 2006

Transient and asymmetric density distributions have been investigated by a digital speckle tomography with a novel integration method. Multiple CCD images captured movements of speckles in three angles of view simultaneously because the flows were asymmetric and unsteady. The speckle movements which have been formed by a ground glass between no flow and downward butane flow from an elliptical nozzle have been calculated by a cross-correlation tracking method so that those distances can be transferred to deflection angles of laser rays for density gradients. A novel integration method has been developed to obtain projection data from the deflection angles for the speckle tomography. The unsteady density fields have been reconstructed from the accurate projection values by the digital speckle tomography method using the developed integration method.

• 한국지반환경공학회 논문집
• /
• 제9권4호
• /
• pp.63-76
• /
• 2008

본 연구는 명확한 설계기준이 제시되어 있지 않은 국내의 수직구 설계기술 개선을 위하여 수행된 것으로, 국내외 설계기준 및 원형 수직구에 대한 이론적인 토압을 고찰하였고, 시공중인 수직구 2개소에 대하여 현장계측을 수행하여 수직구의 변형 및 작용하중분포 특성을 분석하였다. 심도별 토압 및 작용하중분포는 신영완(2007)이 제안한 이론토압과 유사한 경향을 나타내었으며, 수직구 주변 지반의 비균질, 비등방성에 의하여 편측 변형 및 토압이 발생되는 것으로 분석되었다. 토사 및 풍화암의 편하중비($R_p$)는 단면형상비(H/R)에 따라 상이한 결과를 나타내었고, 암반은 35.0%미만의 편하중비($R_p$)를 적용하는 것이 적정한 것으로 검토되었다.