• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.97-99
• /
• 2003

Novel asymmetric 45$^{\circ}$ Schiffman phase shifter having l-coupling for 2.3GHz applications is presented along with measurement results. The proposed phase shifter with a Teflon substrate is fabricated in a smaller area and cost-effective way as compared to the conventional Schiffman phase shifter. In addition, the characteristics of the fabricated phase shifter is extracted and compared. The proposed phase shifter seems useful particularly for the future 2.3GHz wireless applications.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.3
• /
• pp.430-435
• /
• 2008

In the paper, an algorithm called a Constraint algorithm is proposed to solve the fan-in problem occurred in ADC encoding circuits. The Flash ADC architecture uses a double-base number system (DBNS). The DBNS has known to represent the multi-dimensional logarithmic number system (MDLNS) used for implementing the multiplier accumulator architecture of FIR filter in digital signal processing (DSP) applications. The authors use the DBNS with the base 2 and 3 to represent binary output of ADC. A symmetric map is analyzed first, and then asymmetric map is followed to provide addition read DBNS to DSP circuitry. The simulation results are shown for the Double-Base Integer Encoder (DBIE) of the 6-bit ADC to demonstrate an effectiveness of the Constraint algorithm, using $0.18{\mu}\;m$ CMOS technology. The DBIE’s processing speed of the ADC is fast compared to the FAT tree encoder circuit by 0.95 GHz.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.452-458
• /
• 1998

The objective of this study is to obtain the unstable characteristics of the high-speed two-dimensional jet impinging normally onto a flat plate. The study is based on the feedback model and the experiment of the frequency characteristics of the impinging tones. Using the experimental data for the tonal frequencies of the impinging tones the convection speed of the unstable jet is obtained along with all the other features. Three kinds of unstable modes are clarified: asymmetric $A_{1}$ and $A_{2}$ and symmetric S. The condition for the excitation of each mode is found in terms of Strouhal number and Reynolds number. The convection speed is estimated and discussed in comparison with existing theoretical models. It is found that the convection speed increases with frequency when the mode is asymmetric, but decreases when it is symmetric. In addition, the characteristics of the high-speed impinging jet are compared with the low-speed impinging jet.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.729-737
• /
• 2014

A study has been carried out that effectively controls the vibration of asymmetric cable-stayed bridges caused by earthquakes with MR dampers. In order to enhance the practical serviceability of MR dampers, an asymmetric cable-stayed bridge structure has been designed and produced, and a MR damper has been produced so as to have this bridge structure controlled appropriately. An experiment that controls vertical and horizontal vibrations has been carried out by exciting the asymmetric cable-stayed bridge in the horizontal direction with the El-centro seismic wave. The control performance of the MR damper has been evaluated under the five control conditions in the experiments of vibration control in each direction. As a result of the experiment, MR dampers were proved to control vibrations more effectively when either Lyapunov control algorithm or Clipped-optimal control algorithm was used to control vibrations of the asymmetric cable-stayed bridge caused by earthquakes. In addition, different controlling effects were found in vibration controls in vertical and horizontal directions due to the asymmetry of the structure and the horizontal excitation. With such controlling effects, semi-active MR dampers are evaluated to effectively control vibrations caused by earthquakes in flexible and asymmetric structures such as asymmetric cable-stayed bridges.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.32-41
• /
• 2015

High performance polysulfone microfiltration membranes with a high were successfully prepared by vapor induced phase separation (VIPS) coupled with non-solvent induced phase separation (NIPS) process. Asymmetric Membranes were prepared with PSF/DMF/PVP/PEG/DMSO/water mixed solutions and water/IPA coagulant. PSF, DMF, PVP, PEG, DMSO, water was used as a membrane polymer, a solvent, a hydrophilic polymer additive, a polar protic liquid polymer, a polar aprotic nonsolvent, and a polar protic nonsolvent in the casting solution, respectively. The addition of polar aprotic nonsolvents, and polar protic nonsolvents is a convenient and effective method to control membrane structure. In order to control the morphology of polymeric membranes, the spontaneous emulsification induced by drawing water vapor into the exposed casting solution surface has been used. Control of the internal morphology of polymeric membranes by using mixed coagulation solution such as water and IPA is discussed in the present work. The pure water permeability, pore size distribution, surface hydrophilicity and membrane morphology were investigated. Due to the addition of DMSO to casting solution, the mean pore size increased almost $0.2{\mu}m$ and the water flux increased about 1000-1800 LMH.

• KDI Journal of Economic Policy
• /
• v.27 no.1
• /
• pp.185-209
• /
• 2005

This study examines ERPT with asymmetric response and both import and export market shares, using wool trade data. The study found that, asymmetric response may be as common as symmetric response. In addition, the responses (both in price and quantity demanded) to the changes in exchange rate are considerably different across goods, and even for the homogenous goods, across countries. In case of depreciation, the export price changes more than appreciation case in general, and as a result the destination price changes less. It is also found that the cases of excessive or perverse pass-through are found more frequently than reported by previous studies. This finding points out that strategic behavior of firms or unexpected response to exchange rate fluctuation takes place more frequently than we commonly expect or take, in particular at disaggregated levels. When the model considers asymmetric responses of the export price to appreciation and depreciation (of exporter's currency), the estimation provided that for 39 trade cases out of 83, export price responded to appreciation and depreciation in different fashions, although the normal response was the dominating phenomenon with 99 cases or about 60% out of 166 cases. Market shares affected the extent and direction of responses in select cases. These findings will have important implications for policy makers and traders.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.163-173
• /
• 2005

The purpose of this study was to compare the asymmetric degree between maxillofacial hard and soft tissues in individuals with facial asymmetry. Computerized tomographies (CT) of 34 adults (17 male, 17 female) who had facial asymmetry were taken. The CT images were transmitted to personal computers and then reconstructed into three-dimensional (3D) images through the use of computer software. In order to evaluate the degree of facial asymmetry, 6 measurements were constructed as the hard tissue measurements while 6 counterpart measurements were taken as the soft tissue measurements. The means and standard deviations were obtained for each measurement using 3D measure, then t-test was used to investigate the differences between each hard tissue measurement and the corresponding soft tissue measurement All measurements used in the present study showed statistically significant differences between the hard and soft tissues. The degree of soft tissue asymmetry was smaller than that of corresponding hard tissue asymmetry in case of chin deviation, frontal ramal inclination difference, and frontal corpus inclination difference. On the other hand, the degree of soft tissue asymmetry was greater than that of underlying hard tissue asymmetry in the measurement of lip canting and lip cheilion height difference The present study suggests that asymmetric differences of hard and soft tissue is observed nu facial asymmetric subjects and thus soft tissue analysis is needed in addition to hard tissue analysis when making an evaluation of facial asymmetry.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.215-224
• /
• 2022

This study tried to examine the effect of cost asymmetry on food service companies and what characteristics affect such cost behavior. This study analyses cost behavior for cost of good sold, selling, general and administrative cost over the 2019-2020 period. Also, the rate of change in activity level was measured using change in sales. This study measures the behavior of cost using the research model of [1]. As a result of the analysis, it was found that food service companies exhibited cost asymmetric behavior as their sales level decreased. In addition, the cost asymmetric behavior has been strengthened since the corona virus, and the shorter the operating cycle. Lastly, the shorter the inventory holding period and the collection period of accounts receivable, which are components of the operating cycle, more strengthen asymmetric behavior of costs. These results seem to be meaningful in examining the cost structure and factors that may affect the structure for food service industry. This has approached the cost aspect of the situation faced by service food companies due to COVID-19, and it can be suggested that this pandemic can lead to cost reduction due to a decrease in corporate sales.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.869-873
• /
• 2010

A series of novel chiral tert-amino alcohols 4a-h derived from enantiomerically pure phenylalanine were synthesized efficiently and used as chiral ligands in the catalytic enantioselective ethylation of aldehydes with diethylzinc (diethylzinc-to-aldehyde addition). The use of 10 mol % of the amino alcohols led to the corresponding sec-alcohols with excellent enantioselectivities (up to 100% ee) and high yields.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1501-1502
• /
• 2005