• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.335-341
• /
• 2013

Ammonia circulation reactor (ACR) was devised for the effective pretreatment of corn stover. This method is designed to circulate aqueous ammonia continuously so that it can reduce the chemical and water consumption during pretreatment. In this study, ammonia pretreatment with various reaction conditions such as reaction time (4~12 hour), temperature ($60{\sim}80^{\circ}C$), and solid:liquid ratio (1:3~1:8) was tested. Chemical compositions including solid remaining after reaction, lignin and carbohydrates were analyzed and enzymatic digestibility was also measured. It was observed that as reaction conditions become more severe, lignin removal was significantly affected, which was in the range of 47.6~70.6%. On the other hands, glucan and xylan losses were not substantial as compared to that of lignin. At all tested conditions, the glucan loss was not changed substantially, which was between 4.7% and 15.2%, while the xylan loss varied, which was between 7.4% and 25.8%. With (15 FPU-GC220+30 CBU)/g-glucan of enzyme loading, corn stover treated using ammonia circulation reactor for 8~12 hours resulted in 90.1~94.5% of 72-h glucan digestibility, which was higher than 92.7% of $Avicel^{(R)}$-101. In addition, initial hydrolysis rate (at 24 hour) of this treated corn stover was 73.0~79.4%, which was shown to be much faster than 69.5% of $Avicel^{(R)}$-101. As reaction time increased, more lignin removal and it was assumed that the enhanced enzymatic digestibility of treated biomass was attributed to the lignin removal.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.49-55
• /
• 2018

Under the era of energy crisis, hydrogen energy is considered as one of the most potential alternative energies. Liquid hydrogen has much higher energy density per unit volume than gas hydrogen and is counted as the excellent energy storage method. In this study, Navier-Stokes equations based on 2-phase model were solved by using a computational fluid dynamics program and the liquefaction process of gaseous hydrogen passing through a cryogenic cooling tube was analyzed. The copper with high thermal conductivity was assumed as the material for cryogenic cooling tube. For different inlet velocities of 5 m/s, 10 m/s and 20 m/s for hydrogen gas, the distributions of fluid temperature, axial and radial velocities, and volume fractions of gas and liquid hydrogens were compared. These research results are expected to be used as basic data for the future design and fabrication of cryogenic cooling tube to transform the hydrogen gas into liquid hydrogen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.14-22
• /
• 2022

In this study, a fire test was conducted to evaluate the fire performance of precast concrete (PC) slabs in an outdoor environment in response to the increase in fire incidents caused by the growth of warehouses. Prior to the field fire test, the tensile yield strength of the tendon at elevated temperatures was tested to analyze the mechanical properties. Also, by referring to previous studies, the thermal properties of tendon and the mechanical and thermal properties of concrete were investigated. A field fire test was conducted to analyze the structural and fire performance of two identical slabs with 50 and 150 mm bearing length. As the bearing length increased, deflection and horizontal displacement decreased. The fire test lasted for 200 minutes without the collapse of slabs, validating current codes. Based on the structural performance which maintained even with concrete spalling and rupture of some tendons, the bonded method is assumed to be practical in pre-tensioned PC slabs. The results of fire test are expected to be utilized in evaluating the fire performance of PC slabs in warehouses.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.200-209
• /
• 1996

It is assumed to be an efficient method for keeping a germinability of weed seeds as long as possible, if a secondary dormancy is not induced by transferring the seeds of which dormancy was broken in wetting condition into drying condition. To investigate its validity, two experiments were carried out on seeds of 9 weed species ; to find out the most effective storage condition in breaking the dormancy of each weed species and to know whether there is a decrease in the germinability by transferring into drying storage condition. The dormancy of Chenopodium album and Stellaria aquatica was released well under the drying condition, but that of Echinochloa crus-galli var. oryzicola by soaking in water. Other weed species were released from dormancy by storage in wetting condition. When the seeds stored in the wetting or soaking condition, are air-dried and then restored at room or low temperature, a decreasing tendency of germinability which might cause a trouble in using them practically, was not observed except on the seeds of Persicaria vulgaris. In the case of Persicaria vulgaris, the low germination since 3 month-storage seemed not to be caused by drying, because a decrease of its germinability was observed with increasing storage period in all of the storage conditions. In contrast, high germination was induced as the seeds of Echinochloa crusgalli var. oryzicola, which were not germinated during the storage in low temperature and wetting condition, were transferred into the room temperature and drying condition. These results suggest that this approach can be one of the efficient methods for keeping a good germinability as long as possible in most weed seeds.

• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.313-317
• /
• 2012

BACKGROUND: Citrus is usually propagated by grafting onto a rootstock. In Korea, As trifoliate orange (Poncirus trifoliata) has dwarf and strong cold hardness, it is widely used as the rootstock of satsuma mandarin. Because 'Shiranuhi' ((Citrus unshiu ${\times}$ C. sinensis) ${\times}$ C. reticulata), a kind of citrus, also, generally is grafted onto a trifoliate orange, most of farmer has been recognized that 'Shiranuhi' root is naturally trifoliate orange. Meanwhile, reduction of flowering in 'Shiranuhi' orchard has been issued among the farmers and researchers over past few years and they guessed it was occurred by severe prune, oversupply of fertilization, overfruiting and temperature of growth period. However, a few researchers strongly assumed that it would be caused by scion rooting of 'Shiranuhi'. So, this study was carried out to identify the existence of scion rooting in 'Shiranuhi' tree in Korea. METHODS AND RESULTS: To identify the existence of scion rooting in 'Shiranuhi' tree, we randomly selected six 'Shiranuhi'orchards and we surveyed three to four trees, which flowering was not enough, from six 'Shiranuhi' orchards respectively. We took the root samples of 'Shiranuhi' mandarin, and then separated the two group which were non-scion rooting (Trifoliate orange), and scion rooting ('Shiranuhi' mandarin). To identity the scion rooting, we used primer set of three types which were a F2/R15, F4/R15 and F5/R15 primer set. As a result, when we conducted the DNA analysis, fourteen tree in less bloomed twenty tree was proved as tree with the scion rooting of 'Shiranuhi' mandarin. CONCLUSION(S): Scion roots of 'Shiranuhi'mandarin were usually observed in a deeply planted tree, and xylem of 'Shiranuhi' root indicated more white color than a case of trifoliata orange. 'Shiranuhi' tree by scion rooting was more vigorous but less flowering than trees grafted onto trifoliata orange. When we used F2/R15, F4/R15 and F5/R15 primer set for discriminance of 'Shiranuhi'mandarin root and trifoliate root, we identified the existence of scion rooting in 'Shiranuhi', From our results, it is suggested that the influence of scion root should be reviewed in 'Shiranuhi'orchards.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.201-211
• /
• 1981

For the effective utilization of sardine, sardinops melanosticta, one of the major coastal fish in Korea, of which annual catch has been increasing from year to year since 1970, it was processed in form of fermented fish paste. The fish were treated with BHA and Teaox-Ⅱ in concentration of $0.01\%\;and\;0.02\%$ to prevent the oxidation of lipid during fermentation and then salted with $20\%$ table salt and fermented at room temperature of $25\pm3^{\circ}C$. The duration of fermentation necessary for the final product with an acceptable taste was determined by sensory evaluation by means of profile method. From the result of sensory evaluation, one month was found to be suitable as the reasonable duration of fermentation. Both BHA and Tenox-Ⅱ in conceatration of $0.02\%$showed a good preventing effect on the lipid oxidation during fermentation. In case of fermented sardine treated with both antioxidants, lipid oxidation occurred little up to two months, whereas the control showed a remarkable deterioration during one month of fermentation. Most of the nucleotides in sardine was decomposed from adenosing triphosphate to inosine and hypoxanthine during the fermentation of one month. The great portion of free amino acids in the extractives of product was occupied by leucine, glutamic acid, isoleucine, alanine, valine and ysine in turn, and their coatent was $59.4\%$ of the total free amino acids. The amount of essential amino acids was $59.4\%$ of the total free amino acids. The contents of 5'-IMP, betaine, trimethylamine oxide and total creatinine in the extractives of product were $1.9{\mu}mole/g,\;4.9mg\%,\;1.0mg\%\;and\;475mg\%$, respectively. According to the omission test, the main constituents of the characteristic taste of fermented sardine could be assumed as free amino acids and a little amount of 5'-IMP.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.64-80
• /
• 2018

In Korea, citizens can only know general information about crime. Thus it is difficult to know how much they are exposed to crime. If the police can predict the crime risky area, it will be possible to cope with the crime efficiently even though insufficient police and enforcement resources. However, there is no prediction system in Korea and the related researches are very much poor. From these backgrounds, the final goal of this study is to develop an automated crime prediction system. However, for the first step, we build a big data set which consists of local real crime information and urban physical or non-physical data. Then, we developed a crime prediction model through machine learning method. Finally, we assumed several possible scenarios and calculated the probability of crime and visualized the results in a map so as to increase the people's understanding. Among the factors affecting the crime occurrence revealed in previous and case studies, data was processed in the form of a big data for machine learning: real crime information, weather information (temperature, rainfall, wind speed, humidity, sunshine, insolation, snowfall, cloud cover) and local information (average building coverage, average floor area ratio, average building height, number of buildings, average appraised land value, average area of residential building, average number of ground floor). Among the supervised machine learning algorithms, the decision tree model, the random forest model, and the SVM model, which are known to be powerful and accurate in various fields were utilized to construct crime prevention model. As a result, decision tree model with the lowest RMSE was selected as an optimal prediction model. Based on this model, several scenarios were set for theft and violence cases which are the most frequent in the case city J, and the probability of crime was estimated by $250{\times}250m$ grid. As a result, we could find that the high crime risky area is occurring in three patterns in case city J. The probability of crime was divided into three classes and visualized in map by $250{\times}250m$ grid. Finally, we could develop a crime prediction model using machine learning algorithm and visualized the crime risky areas in a map which can recalculate the model and visualize the result simultaneously as time and urban conditions change.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.386-408
• /
• 1988

A study was conducted to develop a model for estimating evapotranspiration and yield of Chinese cabbages from meteorological factors from 1981 to 1986 in Suweon, Korea. Lysimeters with water table maintained at 50cm depth were used to measure the potential evapotranspiration and the maximum evapotranspiration in situ. The actual evapotranspiration and the yield were measured in the field plots irrigated with different soil moisture regimes of -0.2, -0.5, and -1.0 bars, respectively. The soil water content throughout the profile was monitored by a neutron moisture depth gauge and the soil water potentials were measured using gypsum block and tensiometer. The fresh weight of Chinese cabbages at harvest was measured as yield. The data collected in situ were analyzed to obtain parameters related to modeling. The results were summarized as followings: 1. The 5-year mean of potential evapotranspiration (PET) gradually increased from 2.38 mm/day in early April to 3.98 mm/day in mid-June, and thereafter, decreased to 1.06 mm/day in mid-November. The estimated PET by Penman, Radiation or Blanney-Criddle methods were overestimated in comparison with the measured PET, while those by Pan-evaporation method were underestimated. The correlation between the estimated and the measured PET, however, showed high significance except for July and August by Blanney-Criddle method, which implied that the coefficients should be adjusted to the Korean conditions. 2. The meteorological factors which showed hgih correlation with the measured PET were temperature, vapour pressure deficit, sunshine hours, solar radiation and pan-evaporation. Several multiple regression equations using meteorological factors were formulated to estimate PET. The equation with pan-evaporation (Eo) was the simplest but highly accurate. PET = 0.712 + 0.705Eo 3. The crop coefficient of Chinese cabbages (Kc), the ratio of the maximum evapotranspiration (ETm) to PET, ranged from 0.5 to 0.7 at early growth stage and from 0.9 to 1.2 at mid and late growth stages. The regression equation with respect to the growth progress degree (G), ranging from 0.0 at transplanting day to 1.0 at the harvesting day, were: $$Kc=0.598+0.959G-0.501G^2$$ for spring cabbages $$Kc=0.402+1.887G-1.432G^2$$ for autumn cabbages 4. The soil factor (Kf), the ratio of the actual evapotranspiration to the maximum evapotranspiration, showed 1.0 when the available soil water fraction (f) was higher than a threshold value (fp) and decreased linearly with decreasing f below fp. The relationships were: Kf=1.0 for $$f{\geq}fp$$ Kf=a+bf for f$$I{\leq}Esm$$ Es = Esm for I > Esm 6. The model for estimating actual evapotranspiration (ETa) was based on the water balance neglecting capillary rise as: ETa=PET. Kc. Kf+Es 7. The model for estimating relative yield (Y/Ym) was selected among the regression equations with the measured ETa as: Y/Ym=a+bln(ETa) The coefficients and b were 0.07 and 0.73 for spring Chinese cabbages and 0.37 and 0.66 for autumn Chinese cabbages, respectively. 8. The estimated ETa and Y/Ym were compared with the measured values to verify the model established above. The estimated ETa showed disparities within 0.29mm/day for spring Chinese cabbages and 0.19mm/day for autumn Chinese cabbages. The average deviation of the estimated relative yield were 0.14 and 0.09, respectively. 9. The deviations between the estimated values by the model and the actual values obtained from three cropping field experiments after the completion of the model calibration were within reasonable confidence range. Therefore, this model was validated to be used in practical purpose.