• 제목/요약/키워드: Association rate

검색결과 9,315건 처리시간 0.029초

선박보검시장의 개방에 대비한 우리나라 선박보검기준 산정방안에 관한 연구 (A study on Rate Making Scheme of Korean Hull Insurance Rate in Preparation for the Opening of Hull Insurance Market)

  • 김형건
    • 한국항해학회지
    • /
    • 제18권3호
    • /
    • pp.31-49
    • /
    • 1994
  • In the meantime Korean Insurance Industry has been developed a steady growth under government's political protection. But insurance market seems to be opened unavoidably owing to the liberalization of international trade by the Agreements of UR and the bloc of economy by EC Integration and the Organization of NAFTA. By the above reason, especially, in case of hull insurance, the rate of hull insurance is being instituted as a problem. Accordingly the recognition for the problem like this, in thsi study, explained the major objectives of rate making and described the basic rate making methods that are used in property and liability insurance, and searched the rate making schemes of hull insurance rate of the major nations by comparing method. And as a conclusion, the writer presented several schemes including new rate making scheme of hull insurance rate and the security of statistical data about loss ratio, and the establishment of Korean Hull Insurance Association.

  • PDF

벨트의 피복압이 인체 생리에 미치는 영향에 관한 연구 (A Study of Physiological Influence on Human-body According to Clothing Pressure of Belt)

  • 장지혜
    • 대한가정학회지
    • /
    • 제36권6호
    • /
    • pp.85-94
    • /
    • 1998
  • In this study we tested the physiological influence on human-body according to clothing pressure with reduction rate and varied posture using three kinds of belt with different width. The width of belts were 2.5cm, 3.5cm and 4.5cm, and reduction rates of belts were 0%, 2.5% and 5% of the subject/s waist size respectively. the measured postures were standing state and sitting stste in the chair. The reasults are as follows; 1. Clothing pressure was high in the order of Side part>Front part>Back part and the rate fo change in the side part was highest, according to the reductio rate of belts. The more the width of belt was wide, the less the clothing pressure was small, and this kind of phenomenon could be explained by "The Principle of the power". 2. Both the rate of reduction of belt and the change of average skin temperature in accordance with the width of belt is small, however, the more the width of belts is wider and the reduction rate is bigger, the more the skin temperature at the waist part is increased. 3. The blood pressure and pulse was influenced when the width of belt was narrow and the reduction rate was high. 4. A sense restraining was much influenced by the width of belt, especially when the width of belts was wide, the significant difference was permitted.permitted.

  • PDF

교과서 분석을 통한 초중고 학생들의 안전보건교육 실태 조사 (Investigation of education of safety and health for students through analysis of textbooks)

  • 노영만;김기연;이석희;조기홍
    • 한국산업보건학회지
    • /
    • 제18권1호
    • /
    • pp.41-48
    • /
    • 2008
  • On the basis of total page, the coverage rate of education of safety and health in textbooks of elementary school was approximately 10%. In middle school, the contents of safety education were addressed mainly in subject of chemistry below about 5% of coverage rate whereas the contents of health education appeared mainly in subject of athletics below about 15% of coverage rate. Similarly, the contents of safety education and health education in textbooks of high school were indicated mainly in the subjects of chemistry and athletics, showing below about 5% and 30% of coverage rate, respectively. In conclusion, the education level of safety and health in textbooks was generally lower compared to other contents. The coverage rate of safety education was relatively lower than health education, which implicates that extensive contents related to safety education are needed to be added to textbooks in order to establish preliminary attitude for preventing workplace accident.

소금물의 전기분해수가 첨가된 물티슈의 항균력 연구 (Studies on the Antibacterial Activity of Wet-tissue Saturated with Electrolytic Water of NaCl Solution)

  • 서진호;이동진;이명구;오덕환
    • 펄프종이기술
    • /
    • 제47권6호
    • /
    • pp.147-153
    • /
    • 2015
  • Wet-tissue has been used for baby wipe, cleansing pads, industrial wipes, pain relief, personal hygiene, pet care, and healthcare at home, care facilities, restaurant, and hospital. Raw materials of wet-tissue are mainly natural fibers and synthetic fibers such as cotton, rayon, PET (polyethylene terephthalate) and so on. In this study, electrolytic water of NaCl solution was used as fluid in wet-tissue, and the effect of raw materials on antibacterial rate of wet-tissue was investigated. Rayon (100%) showed an excellent antibacterial rate compared with cotton (100%) and rayon:PET (50:50). Antibacterial rate increased as Cl concentration of electrolytic water increased. Absorption of rayon:PET (50:50) was uneven and antibacterial rate of wet-tissue slightly increased by increase of Cl concentration. Antibacterial rate of wet-tissue was 100% under the conditions of more than 1.5 mL of electrolytic water dosage, and dropped under 50% after storage period of 48 hours.

고용성장율 시차분석을 통한 산업기반의 확충방안 - 충남지역의 사례 - (Promotion strategy of Economic Base through Employment Growth Analysis)

  • 최재선
    • 지역연구
    • /
    • 제10권1호
    • /
    • pp.39-52
    • /
    • 1994
  • This paper primarily aims to analyze the growth rate differentials of the economic activities in chung-Nam area. The research has been undertaken to find out the potentials of the economic activities and economic bases in the area. To analyze the economic potentials of the industries, the study employed the economic Growth Rate Differential Analysis by Henderson which is revised form of Shift-Share Analysis Methods. The research employed the employment data according to the standardized two-digit-classification-system during the period of 10 years from 1981 through 1991. The Growth Rate Differential Analysis calculates Total Growth Differentials which are dicomposed into two parts: Weight Part and Rate Part. Total Growth Differential can be calculated as the difference between national growth rate and regional growth rate by industry. The foundings are as follows: First, the economic bases of Chung-Nam area were found to be very weak, largely depending on primary industries such as agriculture and fisheries. Second, there was a great decline in urban industries in Tae Joeon, Cheon An and other cities over period of 1971-1981. It is strongly recommended that the planned items and products of each industrial complex must be reorgnized in a fashion to match those with high competitive power found in this research.

  • PDF

오염입자의 부착상태가 시각적인 세정효과에 미치는 영향 (State of Stain Particle's ADhesion and Its Influence on Visual Consequence of Soil-Removal)

  • 신영선
    • 대한가정학회지
    • /
    • 제20권2호
    • /
    • pp.45-51
    • /
    • 1982
  • Degree of separation and adhesion of dye and stain particles has been measured usually by the rate of reflection of light. However, it could be proved that the relation between the quantity of stain and the rate of reflection greatly varied with kinds of stain and states of adhesion. For this study, several pieces of cotton and polyester having different states of stain adhesion were prepared by staining them with two kinds of artificial stain different in color: Ferric Oxide and Ferric Oxynate. Every piece went through soilremoval test which employed two surfactants: Anionic LAS and Cationic M2-100. After the operation, relations between quantity of pre-soilremoval stain and rate of reflection were measured, as well as those between quantity of post-soilremoval stain and rate of reflection. Rate of reflection and quantity of stain were not proportional in measurement to the pieces stained with Ferric Oxide and Ferric Oxynate. The consequence was also the same with cotton and polyester. That held true of the fat-stained textile. With the same quantity of stain, rate of reflection varied according to the magnitude of stain particles, and the state of adhesion influenced the magnitude of stain particles a great deal.

  • PDF

우리나라 노인의 구강건강 주요지표 (Oral health indicators for Korean Elderly)

  • 정회인
    • 대한치과의사협회지
    • /
    • 제58권1호
    • /
    • pp.45-49
    • /
    • 2019
  • Korean society is experiencing a very rapid change in population aging. Oral diseases, including dental caries and periodontal disease, are usually cumulative and make oral health worse with age. Preventing tooth loss through the prevention and treatment of caries and periodontal diseases are essential for retaining oral function later in life. This study aimed to identify the trend in oral health status among elderlies over 65 years old, using major oral health indicators of Health Plan 2020. The fifth, sixth, and seventh Korea National Health and Nutrition Examination Survey (KNHANES V, VI, VII) were used in the present study to estimate the number of remaining natural teeth, the rate of 20 or more natural teeth, the rate of chewing difficulty, and the rate of oral health check-up of elderly. The number of remaining natural teeth increased from 15.6 in 2010 to 17.1 in 2015, and the rate of 20 or more natural teeth also increased from 45.8% in 2010 to 53.7% in 2015. The rate of chewing difficulty was similar but declined a little from 44.3% in 2010 to 42.9% in 2017. Finally, the rate of oral health check-ups of the elderly increased significantly from 12.2% in 2010 to 21.1% in 2017.

  • PDF

활성 과황산염을 이용한 슬러지 가용화 (Sludge solubilization using sono-activated persulfate)

  • 문상재;남세용
    • 유기물자원화
    • /
    • 제29권3호
    • /
    • pp.35-40
    • /
    • 2021
  • 초음파로 활성화된 과황산염을 이용한 슬러지의 가용화 정도를 확인하기 위하여 VSS 감량화율, 가용화율 및 체외고분자물질을 주요 지표로 측정하여 초음파 및 수산화나트륨을 이용한 알칼리·초음파 방법과 비교하였다. 과황산염·초음파 조건에서 VSS 감량화율은 27.6%, 가용화율은 58.9%로 증가하였고, TB-EPS as Carbohydrate와 Protein은 각각 770 mg/L, 2,162 mg/L 용출되었다. 초음파 및 알칼리·초음파 방법에 비하여 VSS감량화율 및 가용화율이 높았으며, TB-EPS지표로 볼 때 세포의 파괴 및 용출에서도 과황산염·초음파 조건에서 더 효율적이었다.

전륜 인휠모터 후륜구동 차량의 선회 특성 변형을 위한 요모멘트 제어 (Yaw Moment Control for Modification of Steering Characteristic in Rear-driven Vehicle with Front In-wheel Motors)

  • 차현수;좌은혁;박관우;이경수;박재용
    • 자동차안전학회지
    • /
    • 제13권1호
    • /
    • pp.6-13
    • /
    • 2021
  • This paper presents yaw moment control for modification of steering characteristic in rear-driven vehicle with front in-wheel motors (IWMs). The proposed control algorithm is designed to modify yaw rate response of the test vehicle. General approach for modification of steering characteristic is to define the desired yaw rate and track the yaw rate. This yaw rate tracking method can cause the chattering problem because of the IWM actuator response. Large overshoot and settling time in IWM torque response can amplify the oscillation in control input and yaw rate. To resolve these problems, open-loop IWM controller for cornering agility was designed to modify the understeer gradient of the vehicle. The proposed algorithm has been investigated via the computer simulations and the vehicle tests. The performance evaluation has been conducted on dry asphalt using E-segment test vehicle. The performance of the proposed algorithm has been compared to general yaw rate tracking algorithm in the vehicle tests. It has been shown that the proposed control law improved the cornering agility without chattering problem.

코팅 부동화 측정장치개발 및 부동화시간에 관한 연구

  • 안성남
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2001년도 추계학술발표논문집
    • /
    • pp.42-42
    • /
    • 2001
  • The rate of coating consolidation influences the operation of several coating methods and the final quality of the coating layer. The rate of coating consolidation is characterized with a dynamic gloss meter at short times for a thin coating layer applied to the base sheet of interest. During the coating consolidation process, the laser gloss meter response curve exhibits two critical turning points that indicate the two coating immobilization points defined by the traditional methods. Five base sheets with several different coating suspensions are characterized. A model is proposed to estimate the rate of consolidation based on physical properties of the coating suspension, the base paper, and the liquid phase of the coating. The paper properties, especially the contact angle, are found to be an important factor in determining rate of consolidation. The model predicts the correct trends for the different coating suspensions and base sheets. The test method, along the model, can be used to determine the filtercake resistance of the coating layer for a thin and rapidly formed filtercake.

  • PDF