• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.727-732
• /
• 2005

The treatment of wounds of the lower extremity caused by diabetes or vascular dysfunction remains a difficult problem for the plastic surgeon. The use of negative pressure in wound healing is a relatively new method to facilitate chronic wound healing by secondary healing. The use of vacuum-assisted closure(VAC) system is purposed to reduce local edema, increase regional blood flow, enhance epithelial migration, preserve a moist wound environment, reduce bacterial colonization, promote granulation tissue formation, and mechanically enhance wound closure. The VAC also can be used as a dressing for anchoring an applied split thickness skin graft. We reviewed the data from 20 consecutive patients with non-healing wound in lower extremity at Dong-A University from March 2002 to December 2004. We used the VAC in 20 patients and compared the results with the control group. In the VAC using group, mean application duration was about 3 weeks and dressing change was done every other day. The follow-up period of patients ranged from 3 months to 30 months with a mean of 17 months. The points of comparison with control group are wound size, granulation tissue proliferation rate, operation method, preoperative time, postoperative healing time, complication, and cost. With those points, we propose to approve the efficiency of the VAC in non-healing wound. As a result, the VAC used in non-healing wound decrease wound size, accelerate granulation tissue formation, do a wound closure with less invasive operation method, make less postoperative complication, can make operation time shorter. Therefore it is cost effect. Our results demonstrate the usefulness of VAC as an adjunct in management of chronic wounds with other extrinsic factors.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.7
• /
• pp.3311-3317
• /
• 2014

Background: The consequence of Rho GDP dissociation inhibitor alpha (RhoGDI${\alpha}$) activity on migration and invasion of estrogen receptor positive ($ER^+$) and negative ($ER^-$) breast cancer cells has not been studied using the proteomic approach. Changes in expression of RhoGDI${\alpha}$ and other proteins interacting directly or indirectly with RhoGDI${\alpha}$ in MCF7 and MDA-MB-231, with different metastatic potentials is of particular interest. Materials and Methods: $ER^+$ MCF7 and ER- MDA-MB-231 cell lines were subjected to two-dimensional electrophoresis (2-DE) and spots of interest were identified by matrix-assisted laser desorption/ionization time of- flight/time-of-flight (MALDI-TOF/TOF) mass spectrometry (MS) analysis after downregulation of RhoGDI${\alpha}$ using short interfering RNA (siRNA) and upregulated using GFP-tagged ORF clone of RhoGDI${\alpha}$. Results: The results showed a total of 35 proteins that were either up- or down-regulated in these cells. Here we identifed 9 and 15 proteins differentially expressed with silencing of RhoGDI${\alpha}$ in MCF-7 and the MDA-MB-231 cells, respectively. In addition, 10 proteins were differentially expressed in the upregulation of RhoGDI${\alpha}$ in MCF7, while only one protein was identified in the upregulation of RhoGDI${\alpha}$ in MDA-MB-231. Based on the biological functions of these proteins, the results revealed that proteins involved in cell migration are more strongly altered with RhoGDI-${\alpha}$ activity. Although several of these proteins have been previously indicated in tumorigenesis and invasiveness of breast cancer cells, some ohave not been previously reported to be involved in breast cancer migration. Hence, these proteins may serve as useful candidate biomarkers for tumorigenesis and invasiveness of breast cancer cells. Conclusions: Future studies are needed to determine the mechanisms by which these proteins regulate cell migration. The combination of RhoGDI${\alpha}$ with other potential biomarkers may be a more promising approach in the inhibition of breast cancer cell migration.

• Journal of Chest Surgery
• /
• v.39 no.3 s.260
• /
• pp.251-254
• /
• 2006

Metallic fixations devices are widely used in the surgical management of fractures and dislocations of shoulder. It is known that Kirschner wire (K-wire) may migrate into the thoracic cavity or other organs may occur. We report a case in which a K-wire previously placed in the clavicle migrated into the thoracic cavity without causing any trauma to the major vascular structures and was removed successfully by thoracoscopic surgery.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.323-325
• /
• 2011

Purpose: Breast implant ruptures and displacement are problematic complications after augmentation mammoplasty. The authors report a patient whose cohesive silicone gel implant ruptured and migrated into the pleural cavity after augmentation mammoplasty. Methods: A 23-year-old female had received augmentation mammoplasty at a local clinic a week before visiting our hospital. When the patient's doctor performed a breast massage on the sixth postoperative day, the left breast became flattened. The doctor suspected a breast implant rupture and performed revision surgery. The implant, however, was not found in the submuscular pocket and no definite chest wall defect was found in the operative field. The doctor suspected implant migration into the pleural cavity, and after inserting a new breast implant, the doctor referred the patient to our hospital for further evaluation. The patient's vital signs were stable and she showed no specific symptoms except mild, intermittent pain in the left chest. A CT scan revealed the ruptured implant in the left pleural cavity and passive atelectasis. Results: The intrapleurally migrated ruptured implant was removed by video-assisted thoracic surgery (VATS). There were no adhesions but there was mild inflammation of the pleura. No definite laceration of the pleura was found. The patient was discharged on the first day after the operation without any complications. Conclusion: Surgeons should be aware that breast implants can rupture anytime and the injury to the chest wall, which may displace the breast implant into the pleural cavity, can happen during submuscular pocket dissection and implant insertion.

• Korean Journal of Materials Research
• /
• v.22 no.4
• /
• pp.185-189
• /
• 2012

We report plasma-assisted molecular beam epitaxy of $In_XGa_{1-X}N$ films on c-plane sapphire substrates. Prior to the growth of $In_XGa_{1-X}N$ films, GaN film was grown on the nitride c-plane sapphire substrate by two-dimensional (2D) growth mode. For the growth of GaN, Ga flux of $3.7{\times}10^{-8}$ torr as a beam equivalent pressure (BEP) and a plasma power of 150 W with a nitrogen flow rate of 0.76 sccm were fixed. The growth of 2D GaN growth was confirmed by $in-situ$ reflection high-energy electron diffraction (RHEED) by observing a streaky RHEED pattern with a strong specular spot. InN films showed lower growth rates even with the same growth conditions (same growth temperature, same plasma condition, and same BEP value of III element) than those of GaN films. It was observed that the growth rate of GaN is 1.7 times higher than that of InN, which is probably caused by the higher vapor pressure of In. For the growth of $In_xGa_{1-x}N$ films with different In compositions, total III-element flux (Ga plus In BEPs) was set to $3.7{\times}10^{-8}$ torr, which was the BEP value for the 2D growth of GaN. The In compositions of the $In_xGa_{1-x}N$ films were determined to be 28, 41, 45, and 53% based on the peak position of (0002) reflection in x-ray ${\theta}-2{\theta}$ measurements. The growth of $In_xGa_{1-x}N$ films did not show a streaky RHEED pattern but showed spotty patterns with weak streaky lines. This means that the net sticking coefficients of In and Ga, considered based on the growth rates of GaN and InN, are not the only factor governing the growth mode; another factor such as migration velocity should be considered. The sample with an In composition of 41% showed the lowest full width at half maximum value of 0.20 degree from the x-ray (0002) omega rocking curve measurements and the lowest root mean square roughness value of 0.71 nm.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1558-1563
• /
• 2018

We demonstrate improved surface pit and phase separation in thick InGaN grown on a GaN/Si (111) substrate, using plasma-assisted molecular beam epitaxy with an indium modulation technique. The formation of surface pit and compositional inhomogeneity in the InGaN epilayer are investigated using atomic force microscopy, scanning electron microscopy and temperature-dependent photoluminescence. Indium elemental mapping directly reveals that poor compositional homogeneity occurs near the pits. The indium-modulation epitaxy of InGaN minimizes the surface indium segregation, leading to the reduction in pit density and size. The phase separation in InGaN with a higher pit density is significantly suppressed, suggesting that the pit formation and the phase separation are correlated. We propose an indium migration model for the correlation between surface pit and phase separation in InGaN.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.144-146
• /
• 2022

차량 환경에서 발생하는 계산 집약적인 태스크가 증가하면서 모바일 엣지 컴퓨팅(MEC, Mobile Edge Computing)의 필요성이 높아지고 있다. 하지만 지상에 존재하는 MEC 서버는 출퇴근 시간과 같이 태스크가 일시적으로 급증하는 상황에 유동적으로 대처할 수 없으며, 이러한 상황을 대비하기 위해 지상 MEC 서버를 추가로 설치하는 것은 자원의 낭비를 불러온다. 최근 이 문제를 해결하기 위해 UAV(Unmanned Aerial Vehicle)기반 MEC 서버를 추가로 사용해 엣지 서비스를 제공하는 연구가 진행되고 있다. 그러나 UAV MEC 서버는 지상 MEC 서버와 달리 한정적인 배터리 용량으로 인해 서버 간 로드밸런싱을 통해 에너지 사용량을 최소화 하는 것이 필요하다. 본 논문에서는 UAV MEC 서버의 에너지 사용량을 고려한 마이그레이션 기법을 제안한다. 또한 GRU(Gated Recurrent Unit) 모델을 활용한 트래픽 예측을 바탕으로 한 마이그레이션을 통해 지연시간을 최소화할 수 있도록 한다. 제안 시스템의 성능을 평가하기 위해 MEC의 마이그레이션 시점을 결정하는 기준점와 차량의 밀도에 따라 실험을 진행하고, 서버의 로드 편차, UAV MEC 서버의 에너지 사용량 그리고 평균 지연 시간 측면에서 성능을 분석한다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.44-50
• /
• 2001

Metal oxide semiconductor (MOS) structures containing nanocrystals are fabricated by using rapid thermal oxidations of amorphous silicon films. The amorphous films are deposited either by electron beam deposition method or by electron beam deposition assisted by Ar ion beam during deposition. Post oxidation of e-beam deposited film results in relatively small hysteresis of capacitance-voltage (C-V) and the flat band voltage shift, $\DeltaV_{FB}$ is less than 1V indicative of the formation of low density nanocrystals in $SiO_2$ near $SiO_2$/Si interface. By contrast, we observe very large hysteresis in C-V characteristics for oxidized ion-beam assisted e-beam deposited sample. The flat band voltage shift is larger than 22V and the hysteresis becomes even broader as increasing injection times of holes at accumulation condition and electrons at inversion condition. The result indicates the formation of slow traps in $SiO_2$ near $SiO_2$/Si interface which might be related to large density nanocrystals. Roughly estimated trap density is $1{\times}10^{13}cm^{-2}$. Such a large hysteresis may be explained in terms of the activation of adatom migration by Ar ion during deposition. The activated migration may increase nucleation rate of Si nuclei in amorphous Si matrix. During post oxidation process, nuclei grow into nanocrystals. Therefore, ion beam assistance during deposition may be very feasible for MOS structure containing nanocrystals with large density which is a basic building block for single electron memory device.

• Development and Reproduction
• /
• v.4 no.1
• /
• pp.7-12
• /
• 2000

At fertilization, sperm penetrates into oocyte, male and female pronuclei are fused together, and mitotic division follows. However, little information is available on the interactive roles and dynamic processes between cytoplasmic and nuclear components during the pronuclear formation, migration and cell division. The assisted reproductive technologies such as, intracytoplasmic sperm injection (ICSI) and round spermatid injection(ROSI) could provides new treatments for the male infertility as well as tools for the study of basic mechanism during fertilization. Nuclear transfer can also provide a mechanism on the interactive roles between nucleus and cytoplasm since the process includes nuclear reprogrammming of differentiated cells in the enucleated oocytes. Recently, I have investigated developmental processes in porcine oocytes following fertilization parthenogenesis, ICSI, ROSI and nuclear transfer using indirect immunocytochemical and electron microscopic studies. The results could provide an insight into biological questions related with epigenesis as well as strategies for the enhancement of embryology in general such as ICSI and nuclear transfer.

• Journal of Forest and Environmental Science
• /
• v.34 no.1
• /
• pp.82-86
• /
• 2018

Loblolly pine (Pinus taeda L.) is widely distributed in the southern part of the United States and it has been used as a major economic species in the region due to its excellent growth and stem straightness. The tree also grows only in the southern part of Korea because it is susceptible to cold. Recently climate changes have had widespread impacts on forest trees. Thus, the use of good quality seeds is prerequisite for assessing assisted migration adaptation trial. In this study, we conducted to investigate its cone and seed characteristics of each family, which is expected to improve seeds productivity for planting valuable timber trees. A total of 14 families were selected from the experimental forest in Boseong, Jeonnam province in 1981. The seed production capacity was estimated to range from 87.2 to 129.4 among families and the average was 111.3. The number of aborted ovules was investigated in the range of 11.4 to 29.5 for the first test and 7.4 to 22.2 for the second test. The average number of empty and filled seeds was 1.4 and 79.2 per cone, respectively. Based on the results, we can conclude that there is a strong correlation between the number of fertile scale and the seed production ability.