• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.773-777
• /
• 2007

Very various infusion by development of systems that is based on network is spread. Therefore, Evaluation Tool has been an active research area to reduce the risk from intrusion. On this thesis, during threat assesment, we have planned possible an equal-weight applied assesment and considering the characteristics of the organization an assesment which security factor's weight is variably applied to, and respective organizations to examine its security by itself in order to support the easy findings of the vulnerabilities on the management point of view, and to show the advices to practice.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.333-339
• /
• 2007

Risk of damage on information system being grow according to increasing its dependence rate on most of organization. On this work, make planed for a safety assessment system in which information protection management system and threat analyzing method. Also, during threat assesment, we have planned possible an equal-weight applied assesment and considering the characteristics of the organization, an assesment which security factor's weight is variably applied to, and respective organizations to examine its security by itself in order to support the easy findings of the vulnerabilities on the management point of view, and to show the advices to practice.

• Journal of Applied Reliability
• /
• v.4 no.2
• /
• pp.73-90
• /
• 2004

We performed the heat aging test to predict the useful lifetime of Elastomeric Bearing Chloroprene Rubber (CR) used for supporting bridge. During the test, we measured elongation that are influenced by temperature and aging time. The failure of a test piece is defined as the point at which the elongation reaches to 75% of the initial value. This failure criterion is based on KS F 4420: 1998 (Elastomeric Bearing for bridge). Through the accelerated heat aging test, we found that the Arrhenius relationship and the Weibull lifetime distribution are appropriate as the life-temperature relationship and lifetime distribution of the CR, respectively. Using the Arrhenius -Weibull model, the parameters of the model are estimated and the lifetime of the CR at use condition is predicted.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.1 no.1
• /
• pp.55-65
• /
• 2000

The present study retrospectively investigated clinical outcome at patients with low back pain or sciatica during Chuna treatment (flexion-distraction technique). The study population consisted of 29 patients. Discogenic group consisted of 21 patients who were already diagnosed as HNP of lumbar spine with serial MRIs(magnetic resonance imaging) or CTs(computerized tomography). Simple LBP group consisted of 8 patients with low back pain & sciatica who were non-specific disorder on radiologic examination. All patients were treated with flexion-distraction technique, one of Chuna technique, under analysis of Moire Topography. And the evaluation of clinical outcome was done twice during this study by Moire Topography Analytic Point and Low Back Pain Assesment, Visual Analogue Scale. The results were summarized as follows; Total improvement rate of Moire Topography was $25.8{\pm}17.8%$, and the rate of Low Back Pain Assesment was $56.5{\pm}23.0%$, Visual Analogue Scale of post-treatment was $32.6{\pm}22.5$ Between Improvement rate of Moire Topography and improvement rate of Low Back Pain Assesment, significant correlation was proved(Person's coefficient was 0.381, p<0.05). After all, it is certain improvement of Moire Topography represents symptom's improvement.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.439-443
• /
• 2001

A lot of buildings, especially apartment housing, have been dismantled so as to enhance the value of the building without exact assesment for the service life and deterioration degree of the building. Remodeling for an aged building is becoming a hot issue to owners in the public sector and the private sector. Peoples including owner, tenants, constructors recognize the fact that the efficient maintenance of the building during the service life and lengthening the practical service life are very important in point of minimizing LCC. This study suggest a decision making system to judge whether to remodel(renovate) or to reconstruct an aged building. The system is composed of structural performance assesment elapsed(or practical service) life evaluation against whole service life, deterioration assesment of the building equipment, dweller's satisfaction, etc.

• Journal of Applied Reliability
• /
• v.14 no.4
• /
• pp.230-235
• /
• 2014

The failure modes of pneumatic directional control valves include leakage, wear of the spool seal, and sticking of the spool. Among them, the main failure mode of the valve is leakage. The leakage is caused by the wear of the spool seal. However, due to the characteristics of the seal material, the leakage rate is fluctuated a lot rather than constantly increased over time. If life analysis is performed using the first time data of leakage failure, predicted life cycles can be different from the real life cycles. This paper predicts life cycles of the pilot pneumatic directional control valve based on the three point moving average which considers the average of the fluctuating leakage rate.

• Journal of Aerospace System Engineering
• /
• v.4 no.1
• /
• pp.23-26
• /
• 2010

In this study, it was performed damage assesment of small scale composite aircraft developing. This aircraft adopted the sandwich structure to skin of wing. This study aims to investigate the residual strength of sandwich composites with Nomex honeycomb core and carbon fiber face sheets after the open hole damage by the experimental investigation. The 4-point bending tests were used to find the bending strength, and the open hole was applied to introduce the simulated damage on the specimen. The bending strength test results after open hole was compared with the results of no damaged specimen test. The FEM analysis is assessed via an experimental 4-point bending test.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1203_1204
• /
• 2009

Korean Tilting trains have tested on conventional lines since the beginning of 2007 for evaluating its reliability. We achieved some major performance tests which are the maximum operation speed 180km/h test and the maximum curves increasing speed with tilting operation test. In order to analysis reliability data of tilting train, we have used the special data aquisition system which consists of monitor, sensors and depot computer etc. As a results of calculation, until now we realized that the reliability are getting more increasing than starting point of running test.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.265-270
• /
• 2007

The potential and step voltage distribution around low voltage joint-box cover were simulated with the variation of resistivity of water, depth of submerged water and point of leakage current. The potential distribution is very high gradient around low voltage joint-box, this condition is very dangerous states.

• Journal of Engineering Education Research
• /
• v.21 no.5
• /
• pp.54-63
• /
• 2018

The university assessment of Industrial point of view that is the evaluation of university's outcomes was started in 2008 to find out university's social and industrial contribution rate by evaluating the added value of raising up competent people and technical development through university courses. This study is for analyzing outcomes of university assessment of Industrial point of view in the second period and searching for improvement suggestions of evaluation indexes and ways. The outcomes of university assessment of Industrial point of view in the second period is that are the contributions overcoming the difference of industrial requests and university's courses, information offering to university about industrial requests, the substantiate indicator for evaluating the suitability of university's courses and the improvement of university's competitiveness through course's upgrades, The ways improving the university assessment of Industrial point of view are introducing the ways of industrial university's consulting, evaluation for certification and involving graduate school's courses assesment, reinforcing the analysis of industrial requests, improving the indexes of courses and setting up feedback system.