• 디지털융복합연구
• /
• 제16권4호
• /
• pp.39-47
• /
• 2018

본 연구는 우리나라 제4차 산업혁명 대응에 있어 사회-기술시스템론적 공공관리의 적용 가능성을 살펴보는데 목적이 있다. 이를 위해 제4차 산업혁명의 주요 개념과 논의점 검토와 함께 해외 선도국가들의 대응 전략을 국내외 문헌 연구를 통해 분석하였다. 이를 통해 본 연구는 기술 중심에서 벗어나 사회적 난제 해결과 인간중심의 사회 혁신을 위해 제4차 산업혁명을 이끄는 정부 정책기조의 변화 필요성을 강조하였다. 즉 제4차 산업혁명의 변화에 대응하여 사회적 난제를 해결하기 위해서는 기존의 수직적, 계층적, 분화적, 기계적 정부시스템을 과감히 탈피하고, 사회-기술시스템론적 공공관리 방식을 강조해야 한다고 보았다. 향후 정부의 정책 방향은 혁신을 확산할 수 있는 창발적이며 내재적인 모습을 보여야 하며, 정부조직과 정부운영방식의 재설계, 정부 정책영역의 재설정과 이를 입법적으로 뒷받침하는 입법행정의 공조 전략이 필요하다. 본 연구는 공공부문의 제4차 산업혁명 대응성 강화를 위한 정책연구의 첫 논의라는 점에 의미가 있으며 후속연구가 이러지기를 바란다.

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.121-128
• /
• 2010

저층 장스팬 철골프레임에는 강재절감을 위해 휨모멘트 저항에 극대화한 판폭 두께비가 큰 변단면 부재를 사용하고 있다. 게다가, 밀착조임 볼트접합은 고장력 볼트조임에 비하여 공사비 절감과 시공용이성의 장점을 지니고 있다. 한편, 밀착조임 엔드플레이트 접합사용에 다수 장점을 가지고 있음에도 불구하고 구조적 거동 및 해석상의 복잡함이 존재한다. 이에 본 연구에서는 밀착조임 엔드플레이트 접합형 변단면 부재에 대한 실대형 실험을 행하였다. 변수로는 체결 토크치, 재하패턴, 볼트종류, 접합부 파괴형이다. Silva et al.과 AISC(2003)에서 제시한 강성 및 내력식을 이용한 예측결과를 실험결과와 비교하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.309-313
• /
• 2006

Many researchers have studied on the lightness of automobile. These researches are such as a body shell, sub frame, fuel tank, engine etc. The transmission Part is a magnitude one in the aspect of weight. A drive shaft (propeller shaft) transmits the engine power to rear differential gear assembly. It is used in the compact car that is a single drive shaft. But in the case of long body cars such as SUV (Sports Utility Vehicle), truck and large vehicle, two or three divided drive shaft are used to prevent the vibration damage from a drive shaft that has been taken high torsion and rotation. This multi-divided drive shaft structure is so heavy because it is assembled by yoke, center bearing and solid spline axis. When the rear axle move up and down, the spline shaft adjust the variation of a length between the transmission and rear axle gearbox. In this paper, it is studied in the experimental method that is a bending vibration characteristic of slip in tube shaped propeller shaft. This type propeller shaft is developed to combine the spline axis with drive shaft and can be light in weight of transmission part.

• Molecules and Cells
• /
• 제23권2호
• /
• pp.228-238
• /
• 2007

Since molecular structure of hnRNP is not available in foreseeable future, it is best to construct a working model for hnRNP structure. A geometric problem, assembly of $700{\pm}20$ nucleotides with 48 proteins, is visualized by a frame work in which all the proteins participate in primary binding, followed by secondary, tertiary and quaternary binding with neighboring proteins without additional import. Thus, 40S hnRNP contains crown-like secondary structure (48 stemloops) and appearance of 6 petal (octamers) rose-like architectures. The proteins are wrapped by RNA. Co-transcriptional folding for RNP fibril of FMR1 gene can produce 2,571 stem-loops with frequency of 1 stem-loop/15.3 nucleotides and 53 40S hnRNP beaded structure. By spliceosome driven reactions, there occurs removal of 16 separate lariated RNPs, joining 17 separate beaded exonic structures and anchoring EJC on each exon junction. Skipping exon 12 has 5'GU, 3'AG and very compact folding pattern with frequency of 1 stem-loop per 12 nucleotides in short exon length (63 nucleotides). 5' end of exon 12 contains SS (Splicing Silencer) element of UAGGU. In exons 10, 15 and 17 where both regular and alternative splice sites exist, SS (hnRNP A1 binding site) is observed at the regular splicing site. End products are mature FMR-1 mRNP, 4 species of Pri-microRNAs derived from introns 7,9,15 and 3'UTR of exon17, respectively. There may also be some other regulatory RNAs containing ALU/Line elements as well.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제23권2호
• /
• pp.223-229
• /
• 2011

Cyclophilins are originally identified as cytosolic binding protein of the immunosuppressive drug cyclosporine A. They have an activity of peptidyl prolyl cis/trans-isomerases (PPIase), which may play important roles in protein folding, trafficking, assembly and cell signaling. In this study, we report the cloning and characterization of a Bombyx mori cyclophilin A (bCypA) cDNA. The full-length cDNA of bCypA consist of 947 nucleotides with a polyadenylation signal sequence AATAAA and contain an open reading frame of 498 nucleotides encoding a polypeptide of 166 amino acids. The deduced amino acid sequence of bCypA shares a central peptidyl prolyl cis/trans-isomerase and a cyclosporin-A-binding domain with other cyclophilin sequences. Relative quantification real-time (RT) PCR analysis shows that mRNA transcripts of bCypA are detected in all the investigated tissues and highest expression level in the skin of 3-day-old 5 instar larva. Also, bCypA had PPIase activity on the proline-containing peptides. Accordingly, we suggest that bCypA is a new member of the cyclophilin A (CyPA) family and will be useful for quality control of bioactivity recombinant proteins with proline-containing peptides.

• Journal of Microbiology and Biotechnology
• /
• 제11권5호
• /
• pp.825-830
• /
• 2001

Escherichia coli, which harbored the ars operon from a plasmid pMH12 of Klebsiella oxytoca D12, showed filamentation due to the expression of ars genes in the presence of arsenite. The continued DNA replication in the absence of cell division was revealed, since nucleoids abound with DAPI appeared to be arranged in chains. In contrast to overexpression of arsA, its frame-shift mutant and knock-out mutant lost filamentation in the presence of arsenite, which suggested that ars-induced division block was dependent on expression of arsA. ArsA-induced division inhibition was not a consequence of an inhibition of DNA replication, and the inability of arsenite to induce an SOS response indicated that arsA-mediated division inhibition was dependent on the expression of the gene product encoded by the minB operon. ArsA is a peripheral membrane protein with an ATP-binding domain, which is homologous to MinD that requires ATP-dependent efflux. These results suggested that ArsA could possibly recruit MinC to the membrane and modulate cytoplasmic FtsZ to block assembly at the middle of the cell.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.66-70
• /
• 2012

Superconductor flywheel energy storage system (SFESs) is an electro-mechanical battery with high energy storage density, long life, and good environmental affinity. SFESs have been developed for application to a regenerative power of train, the storage of distributed power sources such as solar and wind power, and a power quality improvement. As superconductor bearing is completely passive, it is not necessary to control a system elaborately but accurate analysis in mechanical properties of the HTS bearing is very important for application to SFESs. Stiffness and damping properties are the main index for evaluation the capacity of HTS bearings and make it possible to adjust rotordynamic properties while operating the rotor-bearing system. The superconductor bearing consists of a stator containing single grain YBCO bulks, a ring-type permanent magnet rotor with a strong magnetic field that can reach the bulk surface, and a bearing support for assembly to SFESs frame. In this study, we investigated the stiffness and damping properties of superconductor bearings in 35 kWh SFESs. Finally, we found that 35 kWh superconductor bearing has uniform stiffness properties depend on the various orientations of rotor vibration. We discovered total damping coefficient of superconductor bearing is affected by not only magnetic damping in superconductor bulk but also external damping in bearing support. From the results, it is confirmed that the conducted evaluation can considerably improve energy storage efficiency of the SFESs, and these results can be used for the optimal capacity of superconductor bearings of the SFESs.

• 한국정보통신학회논문지
• /
• 제25권7호
• /
• pp.903-909
• /
• 2021

예쁜꼬마선충(Caenorhabditis elegans)은 염기서열이 완전히 밝혀진 동물로 유전자 기능 분석, 동물 행동 연구 등 다양한 연구 분야에 사용되는 대표적인 생물 종이다. 그동안 선충을 이용해 물의 오염 여부를 판별하기 위한 바이오 모니터링 시스템에 대한 여러 연구들이 있었다. 본 논문은 하천의 수질 오염의 원인이 되는 화학물질을 식별하기 위해 선충의 수영 행동이 활용 가능한 지를 보여주기 위해 기계학습 기반의 바이오 모니터링 시스템을 제안한다. 선충의 수영 행동을 대표하기 위해 선충을 대상으로 가지 길이 유사성(Branch Length Similarity) 엔트로피를 계산한다. 그리고 BLS 엔트로피의 조합인 BLS 엔트로피 프로파일을 클러스터링 알고리즘을 사용해 몇 가지 패턴으로 유형화하여 데이터 집합을 만든다. 0.1ppm 농도의 포름알데히드, 벤젠, 톨루엔이 첨가된 아레나에서 선충의 수영 행동을 촬영하고 개발한 히든 마코프 모델(Hidden Markov Model: HMM)의 성능을 검증한다.

• Steel and Composite Structures
• /
• 제29권5호
• /
• pp.603-622
• /
• 2018

Precast concrete structures are erected from individual prefabricated components, which are assembled on-site using different types of connections. In the present design of these structures, beam-to-column connections are assumed pin jointed. Bolted billet beam to-column connections have been used in the precast concrete industry for many years. They have many advantages over other jointing methods in component production, quality control, transportation and assembly. However, there is currently limited information concerning their detailed structural behaviour under vertical loadings. The experimental work has involved the determination of moment-relative rotation relationships for semi-rigid precast concrete connections in full-scale connection tests. The study reported in this paper was undertaken to clarify the behaviour of such connections under symmetrical vertical loadings. A series of full-scale tests was performed on sample column for which the column geometry and bolt arrangements conformed to successful commercial practice. Proprietary hollow core floor slabs were tied to the beams by 2T25 tensile reinforcing bars, which also provide the in-plane continuity across the connections. The contribution of the floor strength and stiffness to the flexural capacity of the joint is currently neglected in the design process for precast concrete frames. The flexural strength of the connections in the double-sided tests was at least 0.93 times the predicted moment of resistance of the composite beam and slab. The secant stiffness of the connections ranged from 0.94 to 1.94 times the flexural stiffness of the attached beam. In general, the double-sided connections were found to be more suited to a semi-rigid design approach than the single sided ones. The behaviour of double sided bolted billet connection test results are presented in this paper. The behaviour of single sided bolted billet connection test results is the subject of another paper.

• Safety and Health at Work
• /
• 제13권3호
• /
• pp.357-363
• /
• 2022

Background: Refractory ceramic fibers (RCFs) are a suspected carcinogen but have been widely used as insulations. Depending on the temperature, RCFs can transform into crystalline SiO₂, which is a carcinogen that can be present in the air during bulk RCF handling. This study analyzed the physicochemical and morphological characteristics of RCFs at high temperatures and determined the exposure levels during the semiconductor scrubber maintenance. Methods: Sampling was conducted at a company that manufactures semiconductor scrubbers using RCFs as insulation. Bulk RCF samples were collected both before and after exposure to a scrubber temperature of 700℃. Airborne RCFs were collected during scrubber maintenance, and their characteristics were analyzed using microscopes. Results: The components of bulk RCFs were SiO₂ and Al₂O₃, having an amorphous structure. Airborne RCFs were morphologically different from bulk RCFs in size, which could negatively affect maintenance workers' health. 58% of airborne RCFs correspond to the size of thoracic and respirable fibers. RCFs did not crystallize at high temperatures. The exposure caused by airborne RCFs during the scrubber frame assembly and insulation replacement was higher than the occupational exposure limit. Conclusion: Workers conducting insulation replacement are likely exposed to airborne RCFs above safe exposure limits. As RCFs are suspected carcinogens, this exposure should be minimized through prevention and precautionary procedures.