• 한국표면공학회지
• /
• 제44권5호
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• 한국전기전자재료학회논문지
• /
• 제27권2호
• /
• pp.91-96
• /
• 2014

Aspheric lenses used in the thermal imaging are typically fabricated using expensive single-crystal materials (Ge and ZnS, etc.) by the costly single point diamond turning (SPDT) process. As a potential solution to reduce cost, compression molding method using chalcogenide glass has been attracted to fabricate IR optic. Thermal deformation of a molded lens should be compensated to fabricate chalcogenide aspheric lens with form accuracy of the submicron-order. The thermal deformation phenomenon of molded lens was analyzed ant then compensation using mold iteration process is followed to fabricate the high accuracy optic. Consequently, it is obvious that compensation of thermal deformation is critical and useful enough to be adopted to fabricate the lens by molding method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.295-296
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.187-188
• /
• 2013

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.290-290
• /
• 2009

Blu-ray Disk, the next generation optical information storing equipment used Blu-ray is the next generation leading storing equipment that has capacity is about from six times to thirty-five times bigger than the existing CDs, DVDs. Especially, we need elaborate optical pick-Up equipment to record and recognize detailed date. Moreover, Blu-ray disk has so narrow track-pitch so it is used high NA(Numerical Aperture) aspheric glass objective lens. In this research, we processed optical pick-up aspheric glass objective lens molding press core by parallel grinding method with ultra precision machining and mold core surface measured form accuracy(PV), surface roughness(Ra).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.487-488
• /
• 2006

As DLC coating possesses such features as, high hardness, high elasticity, abrasion resistance and chemical stability, there have been exerted continuous efforts in research works in a variety of fields, and this technology has also been applied widely to industrial areas. In this research work, the optimal grinding condition was identified using Microlens Process Machine in order to contribute to the development of aspheric glass which is to be used for mobile phone module having 2 megapixel and $2.5{\times}$ zoom, and mold core (WC) was manufactured having performed ultra-precision machining and effects of DLC coating on shape accuracy(P-V) of mold core and surface roughness(Ra) as well were measured and evaluated.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 하계학술발표회 논문집
• /
• pp.425-426
• /
• 2006

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1051-1057
• /
• 2011

최근 개발된 GMP공정의 활용으로 디지털 카메라, 광저장기기, 각종 전자기기 등의 광응용 기기에서 비구면 유리렌즈가 폭넓게 활용되고 있다. GMP공정은 복잡한 형상의 유리렌즈를 정밀하면서도 경제적으로 생산할 수 있다. 본 연구에서는 다구치 실험계획법을 이용하여 순차이송형 GMP공정에서 비구면 유리렌즈의 성형 조건을 최적화 하였다. 냉각 1단계에서의 압력과 온도, 시간을 3가지 주요 공정변수로 정하였으며, 3캐비티 금형을 이용하여 실험한 결과 순차이송형 유리렌즈 성형공정에서 냉각시간이 비구면 유리렌즈의 형상정밀도(PV)에 가장 큰 영향을 미치는 것을 알 수 있었다.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.962-967
• /
• 2017

The Diamond-Like-Carbon (DLC) coating is a new carbon-based amorphous material. Carbon ions in the plasma are electrically accelerated and collide with the substrate to form a thin film. This film has similar properties to diamonds such as high surface hardness, low coefficient of friction, corrosion resistance and durability that do not react with acids and bases. Also, since there is no thermal deformation, it can be printed at room temperature. and coated on almost all materials such as paper, polymer, ceramics and various metals even aspheric lens it is possible to mirror surface coating with excellent surface roughness. In this paper, we have analyzed the DLC film formed by Filtered Arc Ion Plating (Filtered AIP) process.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.27-36
• /
• 2019

작은 굴절률 및 높은 굴절률을 갖는 저 분산 렌즈에 대한 요구가 증가함에 따라, 높은 내열성 및 내마모성을 갖는 이형성 보호 필름에 대한 필요성이 증가하고 있다. 그러나 광학 산업은 비구면 유리 렌즈 성형에 사용되는 이형보호 필름의 제조 공정 및 품질 표준에 대한 명확한 표준을 아직 확립하지 못했다. 이 기술은 광학 렌즈를 제조하는 각 회사의 노하우로 취급된다. 본 연구에서는 FCVA (Filtered Cathode Vacuum Arc) 기반 ta-C 박막 코팅의 이온에칭, 각 소스 및 필터부의 마그네트론 및 아크 전류, 바이어스 전압의 최적화에 관한 실험을 수행하였다. 그 결과, 코팅성능 측면에서, 이리듐- 레늄 합금 박막 스퍼터링 제품 대비 필름 두께가 약 50% 얇고, 경도는 약 20%, 박막의 접착강도는 약 40 % 개선된 것으로 측정되었다. 본 연구의 박막 코팅 공정 결과는 금형 이형 박막층의 최소 기계적 특성 및 품질 확립을 위한 유리 렌즈의 개발 및 활용에 크게 기여할 것으로 사료된다.