• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.68-75
• /
• 2016

본 연구에서는 반강성포장용 개립도 아스팔트 혼합물의 배합조건을 결정하기 위한 실험적 연구를 수행하였다. 두 종류의 아스팔트 및 함량에 따른 총 12가지의 기본배합을 설정하였고, 국내 KS 기준에 따라 마샬안정도, 공극률 및 투수계수, 칸타브로 시험을 수행하였다. 시험결과로부터 다음과 같은 결론을 얻었다. 마샬안정도는 스트레이트 아스팔트와 개질 아스팔트의 함량이 각각 5.0% 및 5.5%까지는 증가하였으나 함량이 더 높아질 경우에는 증가량이 미미하거나 감소되는 경향을 나타내었다. 공극량의 경우 아스팔트 함량 증가에 따라 감소되고 투수계수도 감소되는 경향을 나타내었는데 상관계수가 86% 수준으로 평가되었다. 칸타브로 손실률 평가 결과 아스팔트 함량이 3.5%에서 6.0%로 증가될수록 감소되었고 개질 아스팔트는 스트레이트 아스팔트에 비해 손실률을 18.8%~33.1% 감소시킬 수 있었다. 국내 규정에서 제시하는 품질기준과 시험 결과를 종합해 볼 때 개질 아스팔트 함량 4.5%가 모체 개립도 아스팔트 제조에 유효한 배합으로 평가되었다.

• International Journal of Contents
• /
• 제6권4호
• /
• pp.39-42
• /
• 2010

In this paper we developed density measurement equipment for Asphalt Pavement based on the electromagnetic capacitance. This kind of Non-Nuclear Density Gauges technology and products is used or studied in USA, Finland, Sweden as standardization of authorized method for pavement density measurement. Effective permitivity of pavement asphalt is characterized in electromagnetic capacitance by the asphalt material, mixed ratio, and harden grade of pavement asphalt. We can get a density value of asphalt by replacing value of electromagnetic capacitance with standard density value and characteristic transformation curve. We are conformed that measurement data according to temperature, humidity, and real field asphalt of our density measurement equipment can be a precise value.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.311-314
• /
• 2001

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity that those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 kg to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.

• Elastomers and Composites
• /
• 제58권2호
• /
• pp.81-86
• /
• 2023

Asphalt pavements are generally composed of fine and coarse aggregates, bitumen, and modifier. Asphalt pavement wear particles (APWPs) are produced by friction between the road surface and the tire tread, and they flow into the environment such as rivers and oceans. Model APWPs were prepared and a single APWP of 212-500 (S-APWP) and 500-1000 ㎛ (L-APWP) was analyzed using thermogravimetric analysis (TGA) to investigate inhomogeneity in the compositions of the APWPs. The reference TGA thermogram was built using thermograms of the raw materials and formulation of the model asphalt pavement. The compositions of the APWPs were different from each other. Ash contents of the APWPs were lower than expected. Inhomogeneity in the total contents of bitumen and modifier was more severe than that in the other components. The inhomogeneity of the S-APWPs was more severe than that of the L-APWPs.

• 한국농공학회지
• /
• 제44권5호
• /
• pp.88-95
• /
• 2002

This study is a fundamental research for recycling waste vinyl (WV) in asphalt mixture for improving roadway pavement. Mix design was conducted by WV content and optimum asphalt content (OAC) was determined for dense-graded surface course mixture. Marshall stability test, indirect tensile strength (ITS) test and wheel tracking test were carried out to measure the characteristics of WV-added asphalt concretes. From the results of this study, recycling WV in asphalt mixture is possible. However, as WV content increased, melted WV clustering appeared in asphalt mixture. It could be considered that adding too much WV in asphalt mixture is not proper. The proper content of LDPE and HDPE WV was appeared to be 12% and 8%, respectively.

• 한국건설순환자원학회지
• /
• 제15권1호
• /
• pp.16-25
• /
• 2020

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.6-10
• /
• 2012

본 연구의 목적은 styrene-butadiene-styrene(SBS) 블록공중합체와 폐타이어 고무분말(crumb rubber, CR)로 개질한 아스팔트의 저온접착특성에 대해 파라핀오일 가소제의 영향에 대한 것이다. SBS/CR로 개질한 아스팔트 블렌드와 파라핀오일/SBS/CR 아스팔트 블렌드의 온도 민감성을 침입도와 연화점으로 측정하였다. 형광현미경으로 파라핀오일/SBS/CR 아스팔트 블렌드에 대한 개질제들의 분산 상태와 만능시험기로 저온에서 접착성질을 각각 측정하였다. 저온접착시험에서 SBS 함량의 증가와 파라핀오일 함량 5 wt % 및 10 wt %에서 접착강도와 변형률이 증가하였다. $-20^{\circ}C$에서 측정한 접착강도와 강인성은 파라핀오일이 10 wt %와 SBS 공중합체의 양이 6 wt %인 조성에서 최대값을 얻었다. SBS/CR/아스팔트 블렌드에서 파라핀오일의 첨가는 유연성을 부여하는 효과를 나타내고, 저온에서 강인성의 증가를 가져오는 것을 확인하였다.

• 자원리싸이클링
• /
• 제9권3호
• /
• pp.37-45
• /
• 2000

본 논문은 가열 페타이어 재활용 아스팔트 혼합물의 습윤과 동결융해 저항성에 대한 시험결과를 나타내고 있다. 재래식 아스팔트 혼합물과 페타이어 재활용 아스팔트의 기계적 특성을 비교하기 위하여 각기 다른 습윤 조건과 동결 융해 횟수하에서 시험이 수행되었다. 또한, 두 혼합물에 대한 최적 아스팔트 함량을 결정하기 위하여 마샬배합설계가 우선 수행되었다. 본 연구에서 수행된 시험결과에 의하면 페타이어 재활용 아스팔트 혼합물의 습윤과 동결-융해 저항성이 재래식 아스팔트 혼합물보다 우수함을 나타내었다. 따라서 향후 도로포장 재료로의 페타이어 재활용은 습윤과 동결융해로 인한 피해를 최소화할 수 있을 것으로 기대된다.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.27-34
• /
• 2018

PURPOSES : The objective of this study is to evaluate the physical properties of recycled asphalt mixtures reinforced with glass fiber. METHODS : Firstly, mixing design was conducted on recycled asphalt mixture for use of 50% recycled aggregate. Various laboratory tests were performed on four types of recycled asphalt mixtures with different glass fiber content to evaluate the physical properties. The laboratory tests include indirect tensile strength test, dynamic modulus test, Hamburg wheel tracking test and tensile-strength ratio to evaluate cracks, rutting and moisture resistance of mixtures. RESULTS : The indirect tensile strength of fiber reinforced glass increased about 139.4%. As a result of comparing the master curves obtained by the dynamic modulus test, the elasticity was low in the low temperature region and high in the high temperature region when the glass fiber was reinforced. The glass fiber contents of PEGS 0.3%, Micro PPGF 0.1% and Macro PPGF 0.3% showed the highest moisture resistance and rutting resistance. CONCLUSIONS : The test results show that use of glass fiber reinforcement can increase the resistance to cracking, rutting, and moisture damage of asphalt mixtures. It is also necessary to validate the long-term performance of recycled asphalt mixtures with glass fiber using full scale pavement testing and field trial construction.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.53-56
• /
• 1976

The air oxidations of asphalt at temperatures ranging from 190$\circ$C to 270$\circ$C were studied for changes in physical properties, proportions and chemical characteristics of asphalt compositions, weak acid and very weak acid contents. The following results were obtained: 1) Oils and resins of asphalt components are oxidized to asphaltenes by blowing(Air oxidation) 2) At 270$\circ$C, asphaltenes begin to undergo a change into benzene insoluble after approximately 12 hours of air oxidation. 3) Weak acid increases at the oxidation temperature below 200$\circ$C. While very weak acid, presumably phenols, generally increases without regard to the blowing(Air oxidation) temperature.