• 콘크리트학회지
• /
• 제5권3호
• /
• pp.161-168
• /
• 1993

본 연구는 아스팔트 콘크리트의 채움재로서 제강더스트의 사용가능성을 실험을 통하여 분석하였다. 실험에는 제강더스트의 기본물성시험과 혼합물의 비교시험을 포함시켰다. 비교시험에서는 채움재로서 석회석분을 사용하는 경우와 제강더스트를 사용하는 경우, 채움재와 아스팔트를 혼합한 필리-비투먼, 그리고 골재까지 혼합한 아스팔트 콘크리트에 대하여 물성을 비교분석하였다. 실험결과 제강더스트는 포장용 채움재의 규정을 만족시키며, 제강더스트를 채움재로 사용한 아스팔트 콘크리트보다 우수하며, 제강더스트는 아스팔트 혼합물용 채움재로써 충분히 사용가능한 것으로 밝혀졌다.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.155-163
• /
• 2013

The use of sustainable technologies such as supplementary cementitious materials (SCMs), and/or recycled materials is expected to positively affect the performance of concrete mixtures. However, it is imperative to qualify and implement such mixtures in practice, if the required specifications of their intended application are met. This paper presents the results of a laboratory investigation of self-consolidating concrete (SCC) containing sustainable technologies. Twelve mixes were prepared with different combinations of fly ash, slag, and recycled asphalt pavement (RAP). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Analysis of the experimental data indicated that inclusion of RAP not only reduces the ultimate strength, but it also affected the compressive strength development rate. The addition of RAP to mixes showed a consistent effect, with a drop in strength after 3, 14, and 28 days as the RAP content increased from 0 to 50 %. However, most of the mixes satisfied SCC fresh properties requirements, including mixes with up to 50 % RAP. Moreover, several mixes satisfied compressive strength requirement for pavements and bridges, those mixes included relatively high percentages of SCMs and RAP.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.1-6
• /
• 2015

PURPOSES : Recently, attempts have been made to evaluate tire-pavement noise based on a measure of Mean Profile Depth (MPD). However, equivalent values of MPD appear to correspond to different levels of tire-pavement noise, which indicates that other factors such as texture wavelength need to be included to improve the accuracy of noise prediction. A single index to represent texture wavelength is proposed in this study. A consistent relationship between tire-pavement noise and texture wavelength on asphalt concrete pavement is observed. METHODS : Profile data and tire-pavement noise data were collected from a number of expressway sections in Korea. In addition, texture wavelength was defined by a Peak Number (PN), which was calculated using profile data. Statistical analysis was performed to find the relationship between the PN and tire-pavement noise. RESULTS : As a result of this study, a linear relationship between PN and tire-pavement noise is observed on asphalt concrete pavement. CONCLUSIONS : Tire-pavement noise on asphalt concrete pavement can be predicted from PN information.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.115-120
• /
• 2014

PURPOSES : This research describes how to predict the life cycles of fatigue cracking based on NCHRP Report 704 as well as modified harmony search (MHS) algorithm. METHODS : The fatigue cracking regression model of NCHRP Report 704 was used in order to calculate the ESAL (Equivalent Single Axle Load) numbers up to pavement failure, based on using material parameters, composite modulus, and surface pavement thickness. Furthermore, the MHS algorithm was implemented to find appropriate material parameters and other structural conditions given the number of ESALs, which is related to pavement service life. RESULTS : The case studies show that the material and structural parameters can be obtained, resulting in satisfying the failure endurance of asphalt concrete structure, given the number of ESALs. For example, the required ESALs such as one or two millions are targeted to satisfy the service performance of asphalt concrete pavements in this study. CONCLUSIONS : According to the case studies, It can be concluded that the MHS algorithm provides a good tool of optimization problems in terms of minimizing the difference between the required service cycles, which is a given value, and the calculated service cycles, which is obtained from the fatigue cracking regression model.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.311-314
• /
• 2001

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity that those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 kg to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.744-754
• /
• 2016

아스팔트콘크리트 궤도는 아스팔트콘크리트 도상 위에 광폭침목 및 콘크리트 패널이 직결되는 궤도 형식으로서 각종 종 횡방향 외력에 대한 저항력이 요구된다. 따라서 본 논문에서는 광폭침목형 및 콘크리트 패널형 아스팔트콘크리트 궤도에 대해 종 횡방향 저항력 실험을 수행하고 궤도변위 저항 장치에 요구되는 필요 전단 저항력을 산정하였다. 또한 궤도변위 저항 장치로서 콘크리트 블록형 앵커 및 강관형 앵커를 개발하고 각각의 앵커 실험체에 대한 수평전단 실험을 수행하여 앵커 종류별 전단 저항력을 도출하였다. 그리고 아스팔트콘크리트 궤도에 궤도변위 저항 장치 적용 시, 전단 저항 성능 및 경제성 등을 고려하여 궤도변위 저항 장치 적정 개수 및 배치 설계(안)을 제시하였다.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.89-99
• /
• 2007

복소수계수 $E^*$로 표현되는 아스팔트 콘크리트의 탄성계수는 아스팔트 포장설계에서 매우 중요한 입력변수다. 일반적으로 아스팔트 콘크리트의 탄성계수는 동탄성 계수시험 (Dynamic Modulus Test)을 사용하여 평가한다. 그러나 동탄성계수시험은 일상적인 시험법으로 적용하기에는 고가의 시험장비, 복잡한 시험장비, 많은 시험시간 등의 문제가 있다. 이에 반하여 충격공진시험(IR: Impact Resonance test)은 비파괴시험으로서 간편한 시험장치, 단순한 시험방법이며 반복성이 뛰어나다. 본 연구의 주요 목적은 충격하중의 타격위치 시편거치 방법 충격하중원의 특성, 신호획득 속도, 신호처리방법 등을 포함한 IR시험의 시험조건의 영향을 평가하는 것이다. 본 연구에서 적용한 모든 시험조건 범위에서 충격공진시험에서 측정된 결과의 변동은 ${\pm}2.7%$ 이내에 들었다.

• 한국도로학회논문집
• /
• 제17권3호
• /
• pp.77-83
• /
• 2015

PURPOSES : In this study, a fracture-based finite element (FE) model is proposed to evaluate the fracture behavior of fiber-reinforced asphalt (FRA) concrete under various interface conditions. METHODS : A fracture-based FE model was developed to simulate a double-edge notched tension (DENT) test. A cohesive zone model (CZM) and linear viscoelastic model were implemented to model the fracture behavior and viscous behavior of the FRA concrete, respectively. Three models were developed to characterize the behavior of interfacial bonding between the fiber reinforcement and surrounding materials. In the first model, the fracture property of the asphalt concrete was modified to study the effect of fiber reinforcement. In the second model, spring elements were used to simulated the fiber reinforcement. In the third method, bar and spring elements, based on a nonlinear bond-slip model, were used to simulate the fiber reinforcement and interfacial bonding conditions. The performance of the FRA in resisting crack development under various interfacial conditions was evaluated. RESULTS : The elastic modulus of the fibers was not sensitive to the behavior of the FRA in the DENT test before crack initiation. After crack development, the fracture resistance of the FRA was found to have enhanced considerably as the elastic modulus of the fibers increased from 450 MPa to 900 MPa. When the adhesion between the fibers and asphalt concrete was sufficiently high, the fiber reinforcement was effective. It means that the interfacial bonding conditions affect the fracture resistance of the FRA significantly. CONCLUSIONS : The bar/spring element models were more effective in representing the local behavior of the fibers and interfacial bonding than the fracture energy approach. The reinforcement effect is more significant after crack initiation, as the fibers can be pulled out sufficiently. Both the elastic modulus of the fiber reinforcement and the interfacial bonding were significant in controlling crack development in the FRA.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.121-129
• /
• 2010

본 연구는 합리적인 단지 내 도로포장의 표준단면을 제시하기 위해 국내외 단지 내 도로포장 설계기준, 주요 파손형태를 조사하고 다양한 포장설계 단면을 대상으로 구조해석을 수행하였다. 이때, 현장에서 사용된 보조기층재와 노상토의 시편을 채취하여 CBR 및 MR 시험을 실시하였으며, 측정한 물성치를 구조해석에 적용하였다. 다양한 현장조건을 고려한 구조해석 결과를 분석하여, 표준단면의 포장층 두께를 보조기층 20cm, 아스팔트기층 5cm, 그리고 표층 5cm로 제안하였다. 또한, 민원이 예상되는 도시지역에서는 일반적으로 아스팔트 기층을 포설한 후 공사차량을 개방하여 작업종료 후에 표층을 포설하게 되는데 이러한 여건을 고려하여 단지 내 아스팔트 콘크리트 포장 표준단면의 포장층의 두께를 보조기층 20cm, 아스팔트 기층 7cm, 그리고, 표층 5cm로 제시하였다.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.1-12
• /
• 2005

본 연구는 노후된 시멘트 콘크리트 포장 위에 덧씌운 아스팔트 혼합물의 반사균열 지연을 위하여 바인더 2가지 일반과 개질, 바닥 보강재로 그리드 3종류와 Fabric 2종류의 효과를 평가하기 위하여 수행하였다. 보강재는 공시체 제조시 미리 슬래브 몰드 바닥에 깔고 가열 아스팔트 혼합물을 몰드에 부은 후 다짐을 하여 아스팔트 슬래브 공시체와 일체화시켜 콘크리트 블록 위에 덧씌우기 형태로 택코팅하여 부착하였다. 본 연구를 위하여 휨파괴(mode I) 및 전단파괴(mode II)반사균열 시험을 수행하였다. 시험결과, 일부의 그리드의 보강이 휨파괴 및 전단파괴에 의한 반사균열의 지연에 효과가 있는 것으로 나타났다. 특히 LDPE 개질아스팔트와 함께 사용하면 반사균열 지연에 큰 효과가 있음을 알 수 있었다.